Microtexture and macrotexture formation in the containerless solidification of undercooled Ni–18.7 at.% Sn eutectic melts

Abstract The microscopic orientations of Ni–18.7 at.% Sn eutectics solidified from undercooled states, in particular, within an individual eutectic colony and among neighboring eutectic colonies, have been measured with respect to the eutectic Ni3Sn and Ni phases; this was done using a scanning electron microscope equipped with the electron backscatter diffraction pattern (EBSP) mapping technique. The EBSPs and inverse pole figures indicate that the Ni3Sn intermetallic compound is continuous and well oriented whereas the Ni solid solution is discontinuous and randomly oriented within an anomalous eutectic grain. Further examination reveals that although Ni particulates are random from an overall view, most neighboring Ni grains have small misorientations of less than 10°. The specific solidification sequence and the effect of released crystallization heat on subsequent crystallization are further considered, which enables the primary Ni phase to segment into individual grains whereas Ni3Sn does not due to higher entropy of fusion. A little rotation or floating within the constrained framework of the crystallizing Ni3Sn compound may yield small misorientation angles. The discontinuous Ni particulates and continuous Ni3Sn network are of great significance in revealing the anomalous eutectic formation. The orientation among independent eutectic colonies is random owing to the random appearance of nuclei throughout the volume of undercooled melts. The macrotextures of pole figures (PFs) of two eutectic phases are also mapped versus melt undercooling, which can be interpreted well when considering the nucleation frequency, variation of eutectic colony size, microtexture within a single eutectic colony, and the overall microstructure evolution as a function of melt undercooling.