journal article·2003-10

Coarsening of γ′ in Ni-Al alloys aged under uniaxial compression: III. Characterization of the morphology

S.V. Prikhodko, A.J. Ardell

Acta Materialia· Volume 51· Issue 17
Publisher page

Abstract

Abstract The morphological evolution of γ′ precipitates during coarsening at 640 °C under applied compressive stress in the range 0–150 MPa was investigated in a monocrystalline Ni-Al alloy containing nominally 13.36 at. % Al. The strain was primarily elastic. The microstructures were examined by transmission electron microscopy, primarily in the section (100) perpendicular to the applied stress. The aspect ratio of a γ′ precipitate, as well as a shape parameter which provides a measure of how cuboidal it is, were used to characterize the γ′ morphology. As the stress increases precipitates of a given size generally tend to become more non-equiaxed and their interfaces are more planar, though this depends on the γ′ volume fraction. The applied compressive stress also promotes the coalescence of γ′ precipitates. This tendency is more pronounced the higher the γ′ volume fraction and appears to be its main influence on directional coarsening during elastic deformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Tien JK, Copley SM. Metall Trans 1971;2:215.10.1007/BF02662660 ↗
2. Ardell AJ, Nicholson RB, Eshelby JD. Acta Metall 1966;14:1295.10.1016/0001-6160(66)90247-1 ↗
3. Maheshwari A, Ardell AJ. Phys Rev Lett 1993;70:2305.10.1103/PhysRevLett.70.2305 ↗
4. Tien JK, Gamble RP. Metall Trans 1972;3:2157.10.1007/BF02643227 ↗
5. Miyazaki T, Nakamura K, Mori H. J Mater Sci 1979;14:1827.10.1007/BF00551021 ↗
6. Bertrand C, Dallas J-P, Rzepski J, Sidhom N, Trichet M-F, Cornet M. Mem Sci Rev Metall 1989;86:333.
7. Socrate S, Parks DM. Acta Metall Mater 1993;41:2185.10.1016/0956-7151(93)90389-A ↗
8. Pineau A. Acta Metall 1976;24:559.10.1016/0001-6160(76)90101-2 ↗
9. Chang JC, Allen SM. J Mater Res 1991;6:1843.10.1557/JMR.1991.1843 ↗
10. Johnson WC, Berkenpas MB, Laughlin DE. Acta Metall 1988;36:3149.10.1016/0001-6160(88)90051-X ↗
11. Schmidt I, Gross D. Proc R Soc Lond A 1999;455:3085.10.1098/rspa.1999.0441 ↗
12. Nabarro FRN, Cress CM, Kotschy P. Acta Mater 1996;44:3189.10.1016/1359-6454(95)00423-8 ↗
13. Laberge CA, Fratzl P, Lebowitz JL. Phys Rev Lett 1995;75:4448.10.1103/PhysRevLett.75.4448 ↗
14. Laberge CA, Fratzl P, Lebowitz JL. Acta Mater 1997;45:3949.10.1016/S1359-6454(97)00116-X ↗
15. Li DY, Chen LQ, Scripta Mater 1997;37:1271.10.1016/S1359-6462(97)00276-5 ↗
16. Orlikowski D, Sagui C, Somoza AM, Roland C. Phys Rev B 2000;62:3160.10.1103/PhysRevB.62.3160 ↗
17. Carry C, Strudel JL. Acta Metall 1977;25:767.10.1016/0001-6160(77)90092-X ↗
18. Feller-Kniepmeier M, Link T. Metall Trans A 1989;20A:1233.10.1007/BF02647405 ↗
19. Arrell DJ, Valles JL. Scripta Metall Mater 1994;30:149.10.1016/0956-716X(94)90030-2 ↗
20. Pollock TM, Argon AS. Acta Metall Mater 1994;42:1859.10.1016/0956-7151(94)90011-6 ↗
21. Buffiere JY, Ignat M. Acta Metall Mater 1995;43:1791.10.1016/0956-7151(94)00432-H ↗
22. Véron M, Bréchet Y, Louchet F. Acta Mater 1996;44:3633.10.1016/1359-6454(96)00011-0 ↗
23. Matan N, Cox DC, Rae CMF, Reed RC. Acta Mater 1999;47:2031.10.1016/S1359-6454(99)00093-2 ↗
24. Paris O, Fährmann M, Fährmann E, Pollock TM, Fratzl P. Acta Mater 1997;45:1085.10.1016/S1359-6454(96)00223-6 ↗
25. Prikhodko SV, Ardell AJ. Part I 2003 doi:10.1016/S1359-6454(03)00329-X.10.1016/S1359-6454(03)00329-X ↗
26. Ardell AJ, Prikhodko SV. Part II 2003 doi:10.1016/S1359-6454(03)00327-6.10.1016/S1359-6454(03)00327-6 ↗
27. Li F, Prikhodko SV, Ardell AJ, Kim D. Proceeding of the international conference on solid-solid phase transformations. ‘99 (JIMIC-3). Koiwa M, Otsuka K, Miyazaki T, editors. The Japan Institute of Metals; 1999, p. 545.
28. Fährmann M, Fratzl P, Paris O, Fährmann E, Johnson WC. Acta Metall Mater 1995;43:1007.10.1016/0956-7151(94)00337-H ↗
29. Prikhodko SV, Nielsen RT, Ardell AJ. Mat Res Soc Symp Proc 1998;481:169.10.1557/PROC-481-169 ↗
30. Kaufman MJ, Voorhees PW, Johnson WC, Biancaniello FS. Metall Trans A 1989;20A:2171.10.1007/BF02650304 ↗
31. Miyazaki T, Imamura H, Kozakai T. Mater Sci Engr 1982;54:9.10.1016/0025-5416(82)90024-6 ↗
32. Ardell AJ, Kim DM. In: Turchi PEA, Gonis A, editors. Phase transformation and evolution in materials. TMS; 2000, p. 309.
33. Ma Y, Ardell AJ. Z Metallkde 2003 (in press).
34. Ardell AJ. In: Morral JE, Schiffman RS, Merchant SM, editors. Experimental methods of phase diagram determination, Warrendale, PA: TMS; 1994, p. 57.
35. Prikhodko SV, Carnes JD, Isaak DG, Ardell AJ. Scripta Mater 1998;38:67.10.1016/S1359-6462(97)00448-X ↗
36. Prikhodko SV, Carnes JD, Isaak DG, Yang H, Ardell AJ. Metall Mater Trans A 1999;30A:2403.10.1007/s11661-999-0248-9 ↗
37. Schmidt I, Gross D. J Mech Phys Solids 1997;45:1521.10.1016/S0022-5096(97)00011-2 ↗