journal article·2003-01

Design aspects of the valve regulated lead/acid battery positive electrode

R.J Ball, R Stevens

Journal of Power Sources· Volume 113· Issue 2
Publisher page

Abstract

Experimental results obtained from the study of 12 V, 40 Ah, valve regulated lead/acid (VRLA) batteries indicated that reduction in capacity during cycling can be attributed to changes in the positive electrode. Corrosion layer (CL) growth has been identified as a key factor that can lead to a reduction in performance and eventual battery failure. In this paper, a selection of results concerned with the positive grid CL are presented. These can be used to suggest ways of improving the present positive electrode design and also to outline some of the different types of defect that form during operation. In addition, reduction in oxygen concentration through the thickness of the layer towards the grid surface was detected indicating an increase in resistivity and thus internal resistance of the cell.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advanced battery technologies research · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Advantages and disadvantages of valve-regulated lead/acid batteries10.1016/0378-7753(94)01940-1 ↗
2. Eight years experience with valve-regulated batteries for automotive use10.1016/0378-7753(94)02003-L ↗
3. Valve-regulated lead/acid batteries for electric vehicles: present and future10.1016/0378-7753(95)02319-4 ↗
4. Valve-regulated lead/acid batteries for SLI use in Japan10.1016/0378-7753(95)02315-1 ↗
5. Failure modes of valve-regulated lead/acid batteries in different applications10.1016/0378-7753(94)01983-3 ↗
6. Physical change in positive-plate material—an underrated contributor to premature capacity loss10.1016/0378-7753(95)02193-K ↗
7. Characterisation of defects observed within the positive grid corrosion layer of the valve regulated lead/acid battery10.1016/S0378-7753(01)00856-4 ↗
8. OPTIMAS 6.1, Optimas UK Ltd., West Maling, Kent, UK.
9. R.J. Ball, R. Kurian, R. Evans, R. Stevens, Influence of positive active materials type and grid alloy on corrosion layer structure and composition in the valve regulated lead/acid battery, J. Power Sources 111 (1) (2002) 23–38.10.1016/S0378-7753(02)00221-5 ↗
10. R.J. Ball, R. Kurian, R. Evans, R. Stevens, Failure mechanisms in valve regulated lead/acid batteries for cyclic applications, J. Power Sources 109 (1) (2002) 189–202.10.1016/S0378-7753(02)00071-X ↗
11. A theory of the grid/positive active-mass (PAM) interface and possible methods to improve PAM utilisation and cycle life of lead/acid batteries10.1016/0378-7753(94)02152-S ↗
12. Finite element (FE) modelling of current density on the valve regulated lead/acid battery positive grid10.1016/S0378-7753(01)00857-6 ↗
13. Some physical properties of sputtered PbO2 films10.1016/0022-3697(62)90237-8 ↗