Analysis of a heat recirculating cooler for fuel gas sulfur removal in solid oxide fuel cells
Source abstract
Abstract
When using conventional fossil fuels, most fuel cell systems require sulfur removal as part of their fuel processing. A novel approach to enable conventional sulfur removal in high-temperature fuel processing is presented. Using established principles from heat-recirculating combustors, it is suggested that high-temperature syngas can be momentarily cooled to conditions that would permit conventional sulfur removal to be carried out at relatively low temperatures. The recirculated heat is then used to heat the gas back to conditions that are minimally less than the original temperature. A model for evaluating the performance of this concept is presented, and calculations suggest that relative to fuel cell applications, reasonable physical dimensions can be expected in actual applications. For high-pressure syngas (i.e., coal gasification), the physical dimensions will rise with the operating pressure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Heat Transfer and Numerical Methods · Rocket and propulsion systems research · Spacecraft and Cryogenic Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. J.H. Hirschenhofer, D.B. Stauffer, R.R. Engleman, Fuel Cells Handbook, DOE/METC-94/1006 (E94004072), Available at National Technical Information Service, Springfield, VA, 1994.
2. Proceedings of the Solid State Energy Conversion Alliance Workshop (SECA), Baltimore, MD, Available at National Technical Information Service, Springfield, VA, 1–2 June 2000.
3. M.V. Twigg (Ed.), Catalyst Handbook, Wolfe Publishing Ltd., 1989.
4. Gardner · Fuel · 2002 · 81 · 215710.1016/S0016-2361(02)00161-8 ↗
5. D.A. Berry, T.H. Gardner, R.E. James, W. Rogers, D. Shekhawat, Fuel processing of diesel for fuel cells, Annual Report Fuel Cells for Transportation Program, Department of Energy Office of Transportation Technology, November 2002.
6. Lloyd · Nature · 1974 · 251 · 4710.1038/251047a0 ↗
7. Lloyd · Nature · 1975 · 257 · 36710.1038/257367a0 ↗
8. F.J. Weinberg, Combustion in heat-recirculating burners, in: F.J. Weinberg (Ed.), Advanced Combustion Methods, Academic Press, 1986, pp. 183–236.
9. Weinberg · Combust. Sci. Technol. · 1996 · 121 · 310.1080/00102209608935584 ↗
10. C.E. Baukal (Ed.), The John Zinc Combustion Handbook, CRC Press, 2001.10.1201/9781420038699 ↗
11. H. Tsuji, A.K. Gupta, T. Hasegawa, M. Katsuki, K. Kishimoto, M. Morita, High-Temperature Air Combustion, CRC Press, 2002.10.1201/9781420041033 ↗
12. M.K. Drayton, A.V. Saveliev, L.A. Kennedy, A.A. Fridman, Y. Li, Syngas production using superadiabatic combustion of ultra-rich methane–air mixtures, in: Proceedings of the 27th Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, PA, 1998, pp. 1361–1367.10.1016/S0082-0784(98)80541-9 ↗
13. F.P. Incropera, D.P. DeWitt, Fundamentals of Heat Transfer, Wiley, 1981.
14. R.H. Perry, D.W. Green, J.O. Maloney, Perry’s Chemical Engineers’ Handbook, 6th ed., McGraw-Hill, 1984.
15. R.A. Svehla, Estimated Viscosities and Thermal Conductivities of Gases at High Temperatures, NASA TR R-132, 1962.
16. R.B. Bird, W.E. Stewart, E.N. Lightfoot, Transport Phenomenon, 2nd ed., Wiley, New York, 2002.