Shortcut model for water-balanced operation in fuel processor fuel cell systems
Source abstract
Abstract
Abstract In a fuel processor, a hydrocarbon or oxygenate fuel is catalytically converted into a mixture rich in hydrogen which can be fed to a fuel cell to generate electricity. In these fuel processor fuel cell systems (FPFCs), water is recovered from the exhaust gases and recycled back into the system. We present a simple mass balance analysis based on the assumption that the off-gas leaving the system is just saturated (perfect condenser). The model results in simple expressions for the net amount of water produced, and the critical condition for water-balanced operation in FPFCs. The analysis includes the composition of the hydrocarbon or oxygenate fuel, the air-to-fuel inlet ratio, humidity, ambient temperature and pressure, and the temperature and pressure in the condenser. The analysis can be used to quickly assess under what conditions operation is critical and additional measures or alternative water recovery technologies are required. The simple analysis is in agreement with the more extensive mass balance analysis by Ahmed et al. [Water balance in a polymer electrolyte fuel cell system, J. Power Sources 112 (2002) 519–530] and shows the same dependencies of the water balance on the H/C ratio, condenser pressure, ambient temperature, etc. The analysis shows that as long as these parameters remain invariant, the actual amount of water that is used in the system is of no importance from an overall water management perspective. For instance, high steam loads in the reformer, or in the fuel cell (e.g., in case of a polyelectrolyte membrane fuel cell) do not burden the overall water balance in the least.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Membrane Separation and Gas Transport · Chemical and Environmental Engineering Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (7)
Show source-provided references
1. Water balance in a polymer electrolyte fuel cell system10.1016/S0378-7753(02)00452-4 ↗
2. Gasoline fuel cell systems10.1016/S0378-7753(99)00317-1 ↗
3. Hydrogen from hydrocarbon fuels for fuel cells10.1016/S0360-3199(00)00097-5 ↗
4. Fuel processing for fuel cell systems in transportation and portable power applications10.1016/S0920-5861(02)00230-4 ↗
5. Two-section reactor model for autothermal reforming of methane to synthesis gas10.1002/aic.690490719 ↗
6. The determining factor for catalyst selectivity in Shell’s catalytic partial oxidation process
7. Atkins · 1990