Development of titanium and yttrium doped sodium-cobalt oxide cathods and their behaviour in cells with electrolytes based on NaTDI Hückel salt with NaPF6 salt additive
Source abstract
Abstract
To meet the needs for the increasing demands for portable energy storages, the alternatives for Li-ion batteries must be researched. One of the ideas is sodium-ion technology, where the development of the novel cathodic material and electrolytes is crucial. In this paper, the new types of electrodes based on the sodium-cobalt oxide doped with yttrium or cobalt are presented. For testing them in cells, at first only two electrolytes were introduced (0.75 M NaTDI in EC:DMC and 0.75M NaTDI in EC:DMC+3% FEC). However, during experiments, the performance of some cells was poor, even after initiating the new protocol of cell assembly. That is why new formulations with the best conductivity performance, physicochemical stability, and interfacial contact with metallic sodium electrodes were used for further testing of cathodes. During the SEM, Raman, EDS, and XRPD analysis, the full characterization of the active materials and electrodes was performed and the best composition of electrode and electrolyte have been chosen basing on the electrochemical cycling of the half-cell, which achieved 143.64 mAh·g −1 discharge capacity value. Also, the metallic sodium electrode stability studies were performed to study the influence of the electrolyte on the anodic side of the cell.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. From lithium-ion to sodium-ion batteries: advantages, challenges, and surprises10.1002/anie.201703772 ↗
2. Organic electrode materials for lithium and post-lithium batteries: an ab initio perspective on design
3. Sodium-ion battery materials and electrochemical properties reviewed10.1002/aenm.201800079 ↗
4. Correction: sodium-ion batteries
5. Research development on sodium-ion batteries10.1021/cr500192f ↗
6. Hard carbon as sodium-ion battery anodes: progress and challenges10.1002/cssc.201801879 ↗
7. Microwave Plasma Chemical Vapor Deposition of SbxOy/C negative electrodes and their compatibility with lithium and sodium Hückel salts - based, tailored electrolytes10.1016/j.electacta.2016.04.175 ↗
8. Sodium metal anodes: emerging solutions to dendrite growth10.1021/acs.chemrev.8b00642 ↗
9. Recent advances in effective protection of sodium metal anode10.1016/j.nanoen.2018.09.017 ↗
10. A sodiophilic interphase-mediated, dendrite-free anode with ultrahigh specific capacity for sodium-metal batteries10.1002/anie.201910202 ↗
11. Systematic studies on liquid sodium 4,5-dicyano-2-(trifluoromethyl)imidazolate (NaTDI)-Based electrolytes and its impact on the cycling behaviour against wet impregnated WI-NaNMC and prussian white cathodes
12. Superior Na-storage performance of low-temperature-synthesized Na3(VO1-xPO4)2F1+2x (0≤x≤1) nanoparticles for Na-ion batteries10.1002/anie.201503188 ↗
13. Prussian blue cathode materials for sodium-ion batteries and other ion batteries
14. A multifunctional 3.5V iron-based phosphate cathode for rechargeable batteries10.1038/nmat2007 ↗
15. Phosphate framework electrode materials for sodium ion batteries10.1002/advs.201600392 ↗
16. Review—Li-Rich layered oxide cathodes for next-generation Li-ion batteries: chances and challenges10.1149/2.0111514jes ↗
17. Layered oxide cathodes for sodium-ion batteries: phase transition, air stability, and performance
18. Synthesis, structure, and electrochemical properties of the layered sodium insertion cathode material: NaNi 1/3Mn 1/3Co 1/3O 210.1021/cm300466b ↗
19. Development and challenge of advanced nonaqueous sodium ion batteries
20. Yttrium-doped Li(Ni, Co)O2: an improved cathode for Li-ion batteries10.1016/S0378-7753(01)00683-8 ↗
21. The role of yttrium content in improving electrochemical performance of layered lithium-rich cathode materials for Li-ion batteries
22. Routes to high energy cathodes of sodium-ion batteries10.1002/aenm.201501727 ↗
23. Electrolyte design strategies and research progress for room-temperature sodium-ion batteries10.1039/C7EE00524E ↗
24. Electrolytes and electrolyte/electrode interfaces in sodium-ion batteries: from scientific research to practical application10.1002/adma.201808393 ↗
25. Current trends and future challenges of electrolytes for sodium-ion batteries10.1016/j.ijhydene.2015.12.090 ↗
26. Electrolytes for Li-ion transport - review
27. Review—development of Hückel type anions: from molecular modeling to industrial commercialization. A success story10.1149/1945-7111/ab829c ↗
28. Liquid electrolytes containing new tailored salts for sodium-ion batteries10.1016/j.electacta.2016.10.146 ↗
29. Optimization of the lithium-ion cell electrolyte composition through the use of the LiTDI salt10.1016/j.electacta.2013.11.134 ↗
30. New tailored sodium salts for battery applications10.1021/cm403349t ↗
31. On the reliability of half-cell tests for monovalent (Li + , Na +) and divalent (Mg 2+ , Ca 2+) cation based batteries10.1149/2.0411707jes ↗
32. Lattice strain and atomic replacement of CoO6 octahedra in layered sodium cobalt oxide for boosted water oxidation electrocatalysis10.1016/j.apcatb.2021.120477 ↗
33. Raman spectroscopy study of α -, β -, γ- Nax Co O2 and γ- (Ca,Sr)x Co O210.1103/PhysRevB.74.094301 ↗
34. Addition of yttrium oxide as an effective way to enhance the cycling stability of LiCoO2 cathode material for Li-ion batteries10.1016/j.ssi.2020.115426 ↗