Microscopic investigation of multi-transfer characteristics in digitally replicated porous gas transport media with locally variable through-plane porosities of Eulerian formulae for electrochemical applications
Source abstract
Abstract
In this study, the microscopic transport characteristics of carbon fiber-based porous gas transport media (PGTMs) with locally variable through-plane porosities are statistically investigated. Gradient porosity distributions from 0.95 to 0.55 are mathematically described in either Eulerian (convex/concave) or linear forms along the PGTM thickness. The PGTMs are randomly generated based on the pre-calculated volume fractions of each component. Various transport characteristics ( i.e., momentum, mass, heat, and charge transfer properties) are numerically estimated in PGTM samples with gradient porosities and compared to those of PGTMs with uniform porosity. The mass transport phenomena throughout the PGTMs are simulated using a D3Q19 ( i.e ., three-dimensional, 19-velocity) lattice Boltzmann method (LBM). The corresponding results reveal that PGTMs with a concave porosity distribution possess higher permeability and are more favorable for mass transfer than those with uniform porosity owing to larger local pore diameters. In addition, PGTMs with a convex porosity distribution exhibit the highest electrical and thermal conductances compared to other PGTM samples owing to the highest fiber volume fractions. Finally, the effects of the porosity distribution on various transport resistances in PGTMs are quantitatively evaluated and compared.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Lattice Boltzmann Simulation Studies · Fuel Cells and Related Materials · Aerosol Filtration and Electrostatic Precipitation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Comprehensive statistical analysis of heterogeneous transport characteristics in multifunctional porous gas diffusion layers using lattice Boltzmann method for fuel cell applications10.1016/j.renene.2019.02.089 ↗
2. Experimental study of mass transport in PEMFCs: through plane permeability and molecular diffusivity in GDLs10.1016/j.electacta.2015.03.100 ↗
3. The measurements of thermal conductivity of carbon fibers
4. Numerical estimation of the effective electrical conductivity in carbon paper diffusion media10.1016/j.apenergy.2011.08.037 ↗
5. Mench · 2008
6. Designing the next generation of proton-exchange membrane fuel cells10.1038/s41586-021-03482-7 ↗
7. Effects of porosity change of gas diffuser on performance of proton exchange membrane fuel cell
8. Micro-porous layer with composite carbon black for PEM fuel cells10.1016/j.electacta.2006.01.048 ↗
9. Effects of pore size gradient in the substrate of a gas diffusion layer on the performance of a proton exchange membrane fuel cell10.1016/j.apenergy.2015.03.072 ↗
10. The effect of through plane pore gradient GDL on the water distribution of PEMFC10.1016/j.ijhydene.2017.12.007 ↗
11. Effects of porosity distribution variation on the liquid water flux through gas diffusion layers of PEM fuel cells10.1016/j.jpowsour.2006.02.060 ↗
12. Effects of porosity gradient in gas diffusion layers on performance of proton exchange membrane fuel cells10.1016/j.energy.2010.09.011 ↗
13. Two-phase transport in the cathode gas diffusion layer of PEM fuel cell with a gradient in porosity10.1016/j.ijhydene.2008.02.077 ↗
14. Numerical study for in-plane gradient effects of cathode gas diffusion layer on PEMFC under low humidity condition10.1016/j.ijhydene.2020.05.048 ↗
15. Numerical study on permeability of gas diffusion layer with porosity gradient using lattice Boltzmann method
16. Estimating effective thermal conductivity in carbon paper diffusion media10.1016/j.ces.2010.03.047 ↗
17. Spiegel · 2008
18. Ex-situ characterisation of gas diffusion layers for proton exchange membrane fuel cells10.1016/j.jpowsour.2012.06.099 ↗
19. Power-law distributions in empirical data10.1137/070710111 ↗
20. Morphological effects of polytetrafluoroethylene meniscus formation on microscopic transport properties of inhomogeneous random porous gas diffusion media for electrochemical applications
21. Single phase through-plane permeability of carbon paper gas diffusion layers10.1016/j.jpowsour.2011.11.084 ↗
22. Determination of effective water vapor diffusion coefficient in pemfc gas diffusion layers10.1016/j.ijhydene.2011.01.036 ↗
23. Guo · 2013
24. Mohammed · 2012
25. Interfacial transport characteristics between heterogeneous porous composite media for effective mass transfer in fuel cells10.1002/er.4500 ↗
26. Cengel · 2015
27. Microstructure and thermal conductivity of carbon/carbon composites made with different kinds of carbon fibers10.1007/s11771-012-1207-y ↗
28. Effect of Polytetrafluoroethylene (PTFE) and micro porous layer (MPL) on thermal conductivity of fuel cell gas diffusion layers: modeling and experiments10.1016/j.jpowsour.2013.09.136 ↗
29. Cengel · 2015
30. Electrical conductivity and resistivity10.1201/9780203009406.ch7 ↗
31. Incropera · 2007
32. A combined path-percolation - lattice-Boltzmann model applied to multiphase mass transfer in porous media10.1016/j.ijheatmasstransfer.2015.09.012 ↗
33. Sherwin · Thermofluids · 1996
34. Naterer · 2018
35. Zar · 1999
36. Cox · 1974
37. De Moivre · 2020
38. Sample size determination for categorical responses10.1111/j.1556-4029.2008.00920.x ↗
39. In-plane microstructure of gas diffusion layers with different properties for PEFC10.1115/1.4025930 ↗
40. Note on the use of different approaches to determine the pore sizes of tissue engineering scaffolds: what do we measure?10.1186/s12938-018-0543-z ↗
41. J. Liu, S.-J. Chung, A. Akbar, S. Um, Morphological effects of polytetrafluoroethylene meniscus formation on microscopic transport properties of inhomogeneous random porous gas diffusion media for electrochemical applications, Int. J. Precis. Eng. Manuf. Technol. 1 (123AD) 3. doi:10.1007/s40684-021-00361-4.10.1007/s40684-021-00361-4 ↗
42. Interfacial transport characteristics between heterogeneous porous composite media for effective mass transfer in fuel cells
43. Evaluation and modeling of PEM fuel cells with the Bruggeman correlation under various tortuosity factors
44. Morphological analyses of polymer electrolyte fuel cell electrodes with nano-scale computed tomography imaging10.1002/fuce.201300008 ↗
45. Stochastic modeling and direct simulation of the diffusion media for polymer electrolyte fuel cells10.1016/j.ijheatmasstransfer.2009.10.044 ↗
46. Welty · 1984
47. Heat transfer in porous media considering phase change and capillarity-the heat pipe effect10.1016/0017-9310(85)90082-1 ↗
48. Capillary behavior in porous solids10.2118/941152-G ↗
49. Through-plane permeability for untreated and PTFE-treated gas diffusion layers in proton exchange membrane fuel cells10.1115/1.4000685 ↗
50. Model of two-phase flow and flooding dynamics in polymer electrolyte fuel cells10.1149/1.1955007 ↗