Nondestructive measurement method for binder content and performance of lithium-ion battery based on electrode deflection under bending deformation
Source abstract
Abstract
Abstract To confirm the durability and reliability of lithium-ion batteries, a fundamental study for the development of nondestructive measurement method for binder content and performance of the batteries prior to cell assembly is presented herein. This study focuses on the deflection of the electrode, consisting of a current collector and an electrode film on the current collector. Bending deformation is used as a representative measurement for the binder content because it can easily be induced and measured during the production process of the electrode. The correlation between the binder content and the Young's modulus of the electrode film is characterized via tensile testing. Furthermore, the correlation between the Young's modulus of the electrode film affected by the binder content and the electrode deflection under bending deformation is experimentally confirmed and verified using finite element analysis (FEA). Additionally, it is confirmed that the charge-transfer resistance and discharge capacity retention of the cells assembled with different binder contents vary. Ultimately, it is shown that the binder content, discharge capacity retention, and charge-transfer resistance of the cells with different binder contents can be predicted from electrode deflection prior to cell assembly.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Sensor Technology and Measurement Systems · Industrial Vision Systems and Defect Detection
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Correlationship between electrode mechanics and long-term cycling performance for graphite anode in lithium ion cells10.1016/j.jpowsour.2012.06.045 ↗
2. In situ measurements of strains in composite battery electrodes during electrochemical cycling10.1007/s11340-014-9873-3 ↗
3. Evolution of the 3D microstructure of a Si-based electrode for Li-ion batteries investigated by FIB/SEM tomography10.1149/2.0421608jes ↗
4. Effect of the heat treatment on the dimensional stability of Si electrodes with PVDF binder10.1016/j.electacta.2016.05.183 ↗
5. Binder distributions in water-based and organic-based LiCoO2 electrode sheets and their effects on cell performance10.1149/2.107112jes ↗
6. A Raman spectroscopic method to find binder distribution in electrodes during drying10.1007/s11998-013-9509-z ↗
7. Investigation of film solidification and binder migration during drying of Li-ion battery anodes10.1016/j.jpowsour.2016.04.018 ↗
8. Investigation of binder distribution in graphite anodes for lithium-ion batteries10.1016/j.jpowsour.2016.11.051 ↗
9. Microstructure formation of lithium-ion battery electrodes during drying — an ex-situ study using cryogenic broad ion beam slope-cutting and scanning electron microscopy (Cryo-BIB-SEM)10.1016/j.jpowsour.2017.01.117 ↗
10. Effect of the binder content on the electrochemical performance of composite cathode using Li6PS5Cl precursor solution in an all-solid-state lithium battery10.1007/s11581-017-2106-x ↗
11. Influence of the binder on lithium ion battery electrode tortuosity and performance10.1149/2.0971805jes ↗
12. Non-destructive evaluation of slot-die-coated lithium secondary battery electrodes by in-line laser caliper and IR thermography methods10.1039/C3AY41140K ↗
13. Characterization of mechanical properties of battery electrode films from acoustic resonance measurements10.1063/1.5021809 ↗
14. In-line monitoring of Li-ion battery electrode porosity and areal loading using active thermal scanning - modeling and initial experiment10.1016/j.jpowsour.2017.07.084 ↗
15. LiFePO4 water-soluble binder electrode for Li-ion batteries10.1016/j.jpowsour.2006.09.067 ↗
16. Measurement and analysis of adhesion property of lithium-ion battery electrodes with SAICAS10.1021/am404580f ↗
17. Tornabene · 2017
18. Prediction of bending rigidity for laminated fabric with adhesive interlining by a laminate model considering tensile and in-plane compressive moduli10.1177/0040517511420764 ↗
19. Mechanical characterization and modeling for anodes and cathodes in lithium-ion batteries10.1016/j.jpowsour.2018.05.007 ↗
20. Kinsler · 1999
21. Simons · 2004
22. Electrochemical impedance study on the low temperature of Li-ion batteries10.1016/j.electacta.2003.10.016 ↗
23. Modeling and application of electrochemical impedance spectroscopy (EIS) for lithium-ion batteries10.33961/jecst.2019.00528 ↗
24. Theoretical and experimental analysis of porous electrodes for lithium-ion batteries by electrochemical impedance spectroscopy using symmetric cell10.1149/2.057207jes ↗