journal article·2023-06

Zn-enriched cathode layer interface via atomic surface reduction of LiNi0.5Mn1.5O4: Computational and experimental insights

Shubham Garg, Sarah Taragin, Arka Saha, Olga Brontvein, Kevin Leung, Malachi Noked, Rosy

Publisher page

Abstract

Despite having the ability to deliver 650 W h kg −1 in addition to the impressive rate capability, superior thermal stability, and facilitated electronic and ionic lithium conduction, LiNi 0.5Mn 1.5O 4 (LNMO) is far from commercial applications. LNMO suffers from irreversible electrolytic degradation on its surface under high voltage operations leading to capacity fading and poor battery life. Therefore, this work aims to improve the stability and electrochemical behavior of LNMO by creating a Zn-enriched cathode layer interface via eccentric and facile diethyl zinc-assisted atomic surface reduction (Zn-ASR). In-depth surface characterization tools and computational calculations demonstrates a conformal 7-8 nm thin Zn-O and C-O enriched layer encapsulating the cathode particles resulting from Zn-ASR. The intensive comparative electrochemical and spectroscopic analysis, indicates superior electrochemical performance of the surface-reduced LNMO w.r.t rate capability (14% higher at 4C), cycling stability, and capacity retention (87% retention). A decrease in gaseous evolution on the surface-treated sample arising from the electrolyte degradation further explains the improvement in the stability and electrochemical behavior of Zn-ASR LNMO. This work proves that electrode material can be substantially improved and incentivized by the chemo-mechanical benefits of rationally designed surface layers.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Lithium and lithium ion batteries for applications in microelectronic devices: a review10.1016/j.jpowsour.2015.03.164 ↗
2. A review on the key issues for lithium-ion battery management in electric vehicles10.1016/j.jpowsour.2012.10.060 ↗
3. Building safe lithium-ion batteries for electric vehicles: a review10.1007/s41918-019-00060-4 ↗
4. Challenges in the development of advanced Li-ion batteries: a review10.1039/c1ee01598b ↗
5. Key strategies for enhancing the cycling stability and rate capacity of LiNi0.5Mn1.5O4 as high-voltage cathode materials for high power lithium-ion batteries10.1016/j.jpowsour.2016.03.070 ↗
6. Spinel materials for high-voltage cathodes in Li-ion batteries10.1039/C3RA45706K ↗
7. An overview on the advances of LiCoO 2 cathodes for lithium‐ion batteries10.1002/aenm.202000982 ↗
8. Developing high-voltage spinel LiNi 0.5 Mn 1.5 O 4 cathodes for high-energy-density lithium-ion batteries: current achievements and future prospects10.1039/D0TA02812F ↗
9. Challenges and approaches for high-voltage spinel lithium-ion batteries10.1002/cphc.201400052 ↗
10. Optimizing interphase structure to enhance electrochemical performance of high voltage LiNi0.5Mn1.5O4 cathode via anhydride additives10.1016/j.cej.2021.128422 ↗
11. Understanding transition-metal dissolution behavior in LiNi 0.5 Mn 1.5 O 4 high-voltage spinel for lithium ion batteries10.1021/jp405158m ↗
12. Prescribing functional additives for treating the poor performances of high-voltage (5 V-class) LiNi 0.5 Mn 1.5 O 4/MCMB Li-ion batteries
13. Advanced model for solid electrolyte interphase electrodes in liquid and polymer electrolytes10.1149/1.1837858 ↗
14. In situ investigation of the electrochemical reduction of carbonate electrolyte solutions at graphite electrodes10.1149/1.1838420 ↗
15. CO 2 and O 2 evolution at high voltage cathode materials of Li-ion batteries: a differential electrochemical mass spectrometry study10.1021/ac403317d ↗
16. Gas evolution in LiNi0.5Mn1.5O4/graphite cells studied in operando by a combination of differential electrochemical mass spectrometry, neutron imaging, and pressure measurements10.1021/acs.analchem.5b04696 ↗
17. Gas generation mechanism in Li‐metal batteries10.1002/eem2.12180 ↗
18. Valuation of surface coatings in high-energy density lithium-ion battery cathode materials10.1016/j.ensm.2021.03.015 ↗
19. Employing synergetic effect of doping and thin film coating to boost the performance of lithium-ion battery cathode particles10.1038/srep25293 ↗
20. Enhancing electrochemical performance and structural stability of LiNi0.5Mn1.5O4 cathode material for rechargeable lithium-ion batteries by boron doping10.1016/j.ceramint.2020.08.125 ↗
21. Surface chemistry of LiNi0.5Mn1.5O4 particles coated by Al2O3 using atomic layer deposition for lithium-ion batteries10.1016/j.jpowsour.2014.10.207 ↗
22. Instantaneous surface Li 3 PO 4 coating and Al–Ti doping and their effect on the performance of LiNi 0.5 Mn 1.5 O 4 cathode materials10.1021/acsaem.1c00160 ↗
23. The effect of vanadium doping on the cycling performance of LiNi0.5Mn1.5O4 spinel cathode for high voltage lithium-ion batteries10.1016/j.jelechem.2020.114926 ↗
24. Atomic surface reduction of interfaces utilizing vapor phase approach: high energy LiNixMnyCoz oxide as a test case10.1016/j.ensm.2018.12.014 ↗
25. Diethylzinc-assisted atomic surface reduction to stabilize Li and Mn-rich NCM10.1021/acsami.1c13315 ↗
26. Improved cycling stability of LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathode material via variable temperature atomic surface reduction with diethyl zinc10.1002/smll.202104625 ↗
27. Robust AlF 3 atomic layer deposition protective coating on LiMn 1.5 Ni 0.5 O 4 particles: an advanced Li-ion battery cathode material powder10.1021/acsaem.8b01048 ↗
28. Mechanism for Al2O3 atomic layer deposition on LiMn2O4 from in situ measurements and ab initio calculations10.1016/j.chempr.2018.08.006 ↗
29. Why does the B3LYP hybrid functional fail for metals?10.1063/1.2747249 ↗
30. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
31. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
32. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
33. Electron-energy-loss spectra and the structural stability of nickel oxide: an LSDA+U study10.1103/PhysRevB.57.1505 ↗
34. Climbing image nudged elastic band method for finding saddle points and minimum energy paths10.1063/1.1329672 ↗
35. Surface structure and equilibrium particle shape of the LiMn 2O4 spinel from first-principles calculations10.1103/PhysRevB.87.075322 ↗
36. Surface properties of nanostructured, porous ZnO thin films prepared by direct current reactive magnetron sputtering10.3390/ma11010131 ↗
37. A comparison of ZnO films deposited on indium tin oxide and soda lime glass under identical conditions10.1063/1.4811091 ↗
38. Long-life LiNi0.5Mn1.5O4/graphite lithium-ion cells with an artificial graphite-electrolyte interface10.1016/j.ensm.2021.09.033 ↗
39. Understanding the capacity fading mechanism in LiNi0.5Mn1.5O4/graphite Li-ion batteries10.1016/j.electacta.2012.12.069 ↗
40. Mitigating structural instability of high-energy lithium- and manganese-rich LiNixMnyCoz oxide by interfacial atomic surface reduction10.1021/acs.chemmater.9b00875 ↗
41. Effect of low-temperature Al 2 O 3 ALD coating on Ni-rich layered oxide composite cathode on the long-term cycling performance of lithium-ion batteries10.1038/s41598-019-41767-0 ↗
42. Oxygen, hydrogen, ethylene and CO2 development in lithium-ion batteries10.1016/j.jpowsour.2007.06.182 ↗