Optimization of fuel cell system operating conditions for fuel cell vehicles
Source abstract
Abstract
Proton exchange membrane fuel cell (PEMFC) technology for use in fuel cell vehicles and other applications has been intensively developed in recent decades. Besides the fuel cell stack, air and fuel control and thermal and water management are major challenges in the development of the fuel cell for vehicle applications. The air supply system can have a major impact on overall system efficiency. In this paper a fuel cell system model for optimizing system operating conditions was developed which includes the transient dynamics of the air system with varying back pressure. Compared to the conventional fixed back pressure operation, the optimal operation discussed in this paper can achieve higher system efficiency over the full load range. Finally, the model is applied as part of a dynamic forward-looking vehicle model of a load-following direct hydrogen fuel cell vehicle to explore the energy economy optimization potential of fuel cell vehicles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Electric and Hybrid Vehicle Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Ahluwalia · J. Power Sources · 2008 · 177 · 16710.1016/j.jpowsour.2007.10.026 ↗
2. Springer · J. Electrochem. Soc. · 1991 · 138 · 233410.1149/1.2085971 ↗
3. Springer · J. Electrochem. Soc. · 1993 · 140 · 351310.1149/1.2221120 ↗
4. Bernardi · J. Electrochem. Soc. · 1992 · 139 · 247710.1149/1.2221251 ↗
5. Friedman · 1998 · 407
6. Badrinarayanan · Int. J. Transport Phenom. · 2001 · 3 · 213
7. J.M. Cunningham, M.A. Hoffman, A comparison of high pressure and low pressure operation of PEM fuel cell systems, SAE, Detroit, MI, March 2001 (paper number 2001-01-0538).10.4271/2001-01-0538 ↗
8. D.J. Friedman, Maximizing direct-hydrogen pem fuel cell vehicle efficiency—is hybridization necessary? SAE, 1999 (paper number 1999-01-0530).10.4271/1999-01-0530 ↗
9. D.J. Friedman, A. Eggert, P. Badrinarayanan, J.M. Cunningham, Balancing stack, air supply, and water/thermal management demands for an indirect methanol PEM fuel cell system, SAE, 2001 (paper number 2001-01-0535).10.4271/2001-01-0535 ↗
10. F. Barbir, M. Fuchs, A. Husar, J. Neutzler, Design and operational characteristics of automotive PEM fuel cell stacks, SAE, 2000 (paper number 2000-01-0011).10.4271/2000-01-0011 ↗
11. J.M. Cunningham, M.A. Hoffman, R.M. Moore, D.J. Friedman, Requirements for a flexible and realistic air supply model for incorporation into a fuel cell vehicle (FCV) system simulation, SAE, 1999 (paper number 1999-01-2912).10.4271/1999-01-2912 ↗
12. J. Cunningham, R. Moore, S. Ramaswamy, K.-H. Hauer, A comparison of energy use for a direct-hydrogen hybrid versus a direct-hydrogen, load-following fuel cell vehicle, SAE, 2003 (paper number 2003-01-0416).10.4271/2003-01-0416 ↗
13. Gelfi · 2003
14. Pischinger · J. Power Sources · 2006 · 154 · 42010.1016/j.jpowsour.2005.10.037 ↗
15. Pukrushpan · 2002 · 3117
16. Pukrushpan · 2002
17. Sjostedt · 2005
18. Pukrushpan · 2004
19. J. Reuter, U.-J. Beister, N. Liu, D. Reuter, B. Eybergen, M. Radhamohan, A. Hutchenreuther, Control of a fuel cell air supply module (ASM), SAE, 2004 (paper number 2004-01-1009).10.4271/2004-01-1009 ↗
20. Control-oriented model for an automotive PEM fuel cell system with imbedded 1+1D membrane water transport
21. K.-H. Hauer, A. Eggert, R.M. Moore, S. Ramaswamy, The hybridized fuel cell vehicle model of the University of California, Davis, SAE 2001, Detroit, MI, March 5–8, 2001 (paper number 2001-01-0543).10.4271/2001-01-0543 ↗
22. Moore · J. Power Sources · 2005 · 141 · 27210.1016/j.jpowsour.2004.05.063 ↗
23. J.M. Cunningham, R.M. Moore, S. Ramaswamy, A comparison of energy use for a direct-hydrogen hybrid versus a direct-hydrogen load-following fuel cell vehicle, SAE 2003 (paper number 2003-01-0416).10.4271/2003-01-0416 ↗
24. H. Zhao, A.F. Burke, Modeling and optimization of PEMFC systems and its application on direct hydrogen fuel cell vehicles, 2008.