Minimum Co content limit in layer-structured cathode materials for Li-ion batteries
Source abstract
Abstract
Abstract Research to decrease the Co content in layer-structured cathode materials for Li-ion batteries is ongoing to increase the battery capacity and decrease the cost of material by increasing the relative Ni content. However, no clear guidance has yet been provided on the minimum possible Co content. In this study, energetically stable structures of delithiated cathodes are investigated, and a complete crystal structure is modeled as a combination of these structures. By the statistical processing of Co distribution within the model crystal, as well as considering the interfacial energy between differently structured domains induced by stacking faults of the O layers, the lower limit for the Co content is calculated. The result indicates that a minimum of 10.2% Co is necessary to prevent degradation of the crystal structure. For further reduction of the Co content, the Co distribution must be concentrated in certain regions of the crystal, which can be achieved by doping with a small amount of a third element. In this manner, the Co content could be ideally reduced to 4.17%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
2. The Li-ion rechargeable battery: a perspective10.1021/ja3091438 ↗
3. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
4. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
5. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
6. Challenges in the development of advanced Li-ion batteries: a review10.1039/c1ee01598b ↗
7. Lithium batteries and cathode materials10.1021/cr020731c ↗
8. Recent progress in high-voltage lithium ion batteries10.1016/j.jpowsour.2013.03.024 ↗
9. Who will drive electric vehicles, olivine or spinel?10.1039/c0ee00559b ↗
10. Phospho-olivines as positive-electrode materials for rechargeable lithium batteries10.1149/1.1837571 ↗
11. An investigation of lithium ion insertion into spinel structure Li-Mn-O compounds10.1149/1.1836544 ↗
12. Research progress in high voltage spinel LiNi0.5Mn1.5O4 material10.1016/j.jpowsour.2010.03.067 ↗
13. van Schalkwijk · 2002
14. Designing principle for Ni-rich cathode materials with high energy density for practical applications10.1016/j.nanoen.2018.04.062 ↗
15. Nickel-rich and lithium-rich layered oxide cathodes: progress and perspectives10.1002/aenm.201501010 ↗
16. A path toward cobalt-free lithium-ion cathodes10.1016/j.jpowsour.2019.227113 ↗
17. Problems and their origins of Ni-rich layered oxide cathode materials10.1016/j.ensm.2019.08.013 ↗
18. Prospect and reality of Ni‐rich cathode for commercialization10.1002/aenm.201702028 ↗
19. Mixed transition-metal oxides: design, synthesis, and energy-related applications10.1002/anie.201303971 ↗
20. An advanced lithium ion battery based on high performance electrode materials10.1021/ja110522x ↗
21. Layered lithium transition metal oxide cathodes towards high energy lithium-ion batteries10.1039/c2jm14305d ↗
22. Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries10.1002/anie.201409262 ↗
23. Mn versus Al in layered oxide cathodes in lithium-ion batteries: a comprehensive evaluation on long-term cyclability10.1002/aenm.201703154 ↗
24. Improvement of high-voltage cycling behavior of Li(Ni1/3Co1/3Mn1/3)O2 cathodes by Mg, Cr, and Al substitution10.1007/s10008-008-0695-z ↗
25. Synthesis and electrochemical properties of high density LiNi0.8Co0.2-xTixO2 for lithium-ion batteries10.1149/1.3116244 ↗
26. Self-passivation of a LiNiO2 cathode for a lithium-ion battery through Zr doping10.1021/acsenergylett.8b00805 ↗
27. Comparative studies of zirconium doping and coating on LiNi0.6Co0.2Mn0.2O2 cathode material at elevated temperatures10.1016/j.jpowsour.2018.06.052 ↗
28. Recent developments in cathode materials for lithium ion batteries10.1016/j.jpowsour.2009.08.089 ↗
29. Effect of cobalt substitution on cationic distribution in LiNi1-yCoyO2 electrode materials10.1016/S0167-2738(96)00370-0 ↗
30. CALYPSO: a method for crystal structure prediction10.1016/j.cpc.2012.05.008 ↗
31. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
32. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
33. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
34. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
35. Hybrid functionals based on a screened Coulomb potential10.1063/1.1564060 ↗
36. Thermochemical investigation of Zr doping in LiNi8/12Co2/12Mn2/12O2 based on phase equilibria simulation10.1002/qua.26028 ↗
37. Effects and distribution of Zr introduced in Ni-based cathode material for Li-ion batteries10.1039/C9CP01850F ↗
38. Comparison of electrochemical performance of LiNi1-xCoxO2 cathode materials synthesized from coated (1-x)Ni(OH)2@xCo(OH)2 and doped Ni1-xCox(OH)2 precursors10.1039/C8RA10116G ↗
39. Stable layered Ni-rich LiNi0.9Co0.07Al0.03O2 microspheres assembled with nanoparticles as high-performance cathode materials for lithium-ion batteries10.1039/C6TA09921A ↗
40. LiNi0.90Co0.07Mg0.03O2 cathode materials with Mg-concentration gradient for rechargeable lithium-ion batteries10.1039/C9TA02803J ↗
41. Extracting maximum capacity from Ni-rich Li[Ni0.95Co0.025Mn0.025]O2 cathodes for high-energy-density lithium-ion batteries10.1039/C7TA11346C ↗