journal article·2017-01

Control of an afterburner in a diesel fuel cell power unit under variable load

Gregor Dolanc, Boštjan Pregelj, Janko Petrovčič, Remzi Can Samsun

Publisher page

Abstract

Abstract In this paper, the control system for a catalytic afterburner in a diesel fuel cell auxiliary power unit is presented. The catalytic afterburner is used to burn the non-utilised hydrogen and other possible combustible components of the fuel cell anode off-gas. To increase the energy efficiency of the auxiliary power unit, the thermal energy released in the catalytic afterburner is utilised to generate the steam for the fuel processor. For optimal operation of the power unit in all modes of operation including load change, stable steam generation is required and overall energy balance must be kept within design range. To achieve this, the reaction temperature of the catalytic afterburner must be stable in all modes of operation. Therefore, we propose the afterburner temperature control based on mass and thermal balances. Finally, we demonstrate the control system using the existing prototype of the diesel fuel cell auxiliary power unit.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Methanol fuel cell system and auxiliary power units: www.efoy.com.
2. Truma, IMM launch fuel cell APU running on LPG for RVs10.1016/S1464-2859(12)70280-8 ↗
3. Self-sustained operation and durability test of a 300 W-class micro-structured LPG fuel processor10.1016/j.ijhydene.2010.12.045 ↗
4. Fuel processors for fuel cell APU applications10.1016/j.jpowsour.2005.10.026 ↗
5. Direct steam reforming of diesel and diesel–biodiesel blends for distributed hydrogen generation10.1016/j.ijhydene.2014.10.062 ↗
6. Coupled operation of a diesel steam reformer and an LT- and HT-PEFC10.1016/j.ijhydene.2014.03.129 ↗
7. DESTA project to demonstrate European SOFC truck APU, Fuel Cells Bulletin, Vol. 2012, Issue 5, May 2012, Page 4.10.1016/S1464-2859(12)70124-4 ↗
8. Fuel processing of diesel and kerosene for auxiliary power unit applications10.1021/ef301976f ↗
9. Diesel fuel reformer for automotive fuel cell applications10.1016/j.ijhydene.2009.02.013 ↗
10. Development and evaluation of a microreactor for the reforming of diesel fuel in the kW range10.1016/j.ijhydene.2009.06.005 ↗
11. Further development of a microchannel steam reformer for diesel fuel10.1016/j.ijhydene.2012.03.093 ↗
12. A miniature fuel reformer system for portable power sources10.1016/j.jpowsour.2014.08.021 ↗
13. Dynamic modeling and control structure design of an experimental fuel processor10.1016/j.ijhydene.2005.06.027 ↗
14. Analysis of the control structures for an integrated ethanol processor for proton exchange membrane fuel cell systems10.1016/j.jpowsour.2008.12.099 ↗
15. A model-based approach to battery selection for truck onboard fuel cell-based APU in an anti-idling application10.1016/j.apenergy.2014.10.007 ↗
16. Improving the operation of a fuel-cell power unit with supervision control - a simulation study10.1016/j.jpowsour.2011.06.077 ↗
17. FCGEN project website: www.fcgen.com.
18. Control of autothermal reforming reactor of diesel fuel10.1016/j.jpowsour.2016.02.073 ↗
19. Catalytic radiant burner for stationary and mobile applications10.1016/S0920-5861(98)00323-X ↗
20. Development of a catalytic combustor for a stationary fuel cell power generation system10.1016/j.renene.2009.10.015 ↗
21. A 5 kWt catalytic burner for PEM fuel cells: effect of fuel type, fuel content and fuel loads on the capacity of the catalytic burner10.1016/j.ijhydene.2010.08.068 ↗
22. Pollutant emissions of burners for steam reformers for residential power supply10.1016/j.ijhydene.2011.01.066 ↗
23. D. J. Hart-Predmore, W. H. Pettit, Methanol tailgas combustor control method, US Patent 6436561 B1, filed May 5, 2000, issued August 20, 2002.
24. Fuel cell systems with reforming of petroleum-based and synthetic-based diesel and kerosene fuels for APU applications10.1016/j.ijhydene.2015.03.091 ↗
25. Long-term stability at fuel processing of diesel and kerosene10.1016/j.ijhydene.2014.03.148 ↗
26. The development and evaluation of microstructured reactors for the water gas shift and preferential oxidation reactions in the 5 kW range10.1016/j.ijhydene.2009.12.113 ↗
27. Start-up and load-change behavior of a catalytic burner of a fuel-cell-based APU for middle destillates10.1002/fuce.201400016 ↗
28. Catalytic burner with internal steam generation for a fuel-cell-based auxiliary power unit for middle distillates10.1016/j.ijhydene.2013.05.167 ↗
29. Microstructured reactors for distributed and renewable production of fuels and electrical energy10.1016/j.cep.2012.10.015 ↗
30. Barbir · 2005
31. Åström · 1995