Improvement of failure detection of production line test results by implementing ΔV criteria
Source abstract
Abstract
Abstract The reliability of automotive batteries is an important factor, especially for the OEM market. To ensure consistent reliability all automotive batteries are subjected to electrical load tests prior to shipment. These tests are performed in accordance with industry accepted standards. It is essential that the energy discharged from the battery during test be minimized to avoid the cost and delay associated with recharge. When defining the ideal high rate discharge test process one must consider these basic requirements. Immediately after formation, and preferably, after post cleaning, batteries are discharged at high current for a few seconds. The voltage under load at the end of test is determined and compared to nominal values resulting in a pass/fail decision. This paper discusses the effectiveness of the present high rate discharge test evaluation criteria in terms of it’s ability to accurately discriminate between acceptable and unacceptable batteries. Variations in materials and manufacturing processes affect open-circuit voltage (OCV) and constant current voltage (CCV) measurements leading to erroneous pass/fail determinations. The paper will illustrate how these variations can be recognized and statistically evaluated. A supplemental evaluation criterion is presented which significantly improves the reliability of test results. This criterion is the gradient Δ V of the discharge curve. Evaluation of test data using this criterion yields information that directly correlates to the failure mode of the rejected battery, including irregularities in pasting and assembly. This paper concludes that the implementation of Δ V criterion significantly improves the failure detection of batteries subjected to production line high-rate discharge tests. Using the Δ V criterion to evaluate the test results is a more accurate determinant of an acceptable battery than the traditional criteria and results in fewer customer returns.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Reliability and Maintenance Optimization · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (3)
Show source-provided references
1. Standard EN 600095-1 for Stationary Batteries.
2. Wagner · J. Power Sources · 1995 · 53 · 15310.1016/0378-7753(94)01983-3 ↗
3. Dr.-Ing.Wolfgang Fischer, Blei-Fibel, Accumulatorenwerke HOPPECKE.