journal article·2015-10

Microarchitectured solid oxide fuel cells with improved energy efficiency (Part II): Fabrication and characterization

Chan Yoon, Mingfei Liu, Dajun Yuan, Rui Guo, Meilin Liu, Suman Das

Publisher page

Abstract

Abstract Part I of this study presented a computational model-based approach for enhancing the performance of solid oxide fuel cells (SOFCs) with designed microarchitecture. The performance of such SOFCs was predicted to greatly improve through a systematic computational design and optimization approach. Part II here proves through experimental fabrication and characterization that microarchitectured SOFC performance can be improved as predicted by the model. A real and specific SOFC is chosen, fabricated and characterized to demonstrate the proof-of-concept. Fabrication techniques using sintering and laser ablation are demonstrated. Pore size and geometry are characterized by interferometry-based surface profilometry and scanning electron microscopy. SOFC button cell performance testing including power output performance and electrochemical impedance spectroscopy are performed. The results show that SOFC performance in a microarchitectured cell can be improved over a baseline button cell by 9–17% in current density and by 7–19% in power density.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. High-temperature solid oxide fuel cell - technical status10.1016/0378-7753(83)80009-3 ↗
2. The monolithic VPS-fabricated SOFC
3. Energy conversion via solid oxide electrolyte electrochemical. Cells at high temperatures10.1016/0167-2738(81)90127-2 ↗
4. Han · 2004 · 24
5. N. Q. Minh, B. W. Chung, R. Doshi, G.R. Lear, K. Montgomery, and E. T. Ong, “Fabrication and performance of zirconia electrolysis cells for carbon dioxide reduction for mars in situ resource utilization applications,” ISRU III Technical Interchange Meeting.
6. Preparation of YSZ thin film on porous electrode of SOFC
7. Wagner · 1943
8. Bado · 2007
9. Pulsed laser micromachining of yttria-stabilized zirconia dental ceramic for manufacturing10.1111/j.1744-7402.2008.02203.x ↗
10. Hellrung · 1999 · 348
11. Helvajian · 1999
12. Kuriyama · 2002 · 567
13. Femtosecond laser deep hole drilling of silicate glasses in air10.1016/S0169-4332(01)00468-8 ↗
14. YSZ-based SOFC with modified electrode/electrolyte interfaces for operating at temperature lower than 650 C10.1016/j.jpowsour.2008.01.066 ↗
15. Barsoukov · 2005
16. O'Hayre · 2006
17. Anode supported single chamber solid oxide fuel cell in CH4-air mixture10.1149/1.1782141 ↗
18. Complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness10.1016/S0378-7753(00)00556-5 ↗
19. Yoon · 2009 · 533
20. Relationship between overpotential and the three phase boundary length10.1016/0167-2738(96)00284-6 ↗
21. Effect of porous composite electrode structure on solid oxide fuel cell performance. I. Theoretical analysis10.1149/1.1837360 ↗
22. Role of electrode microstructure on activation and concentration polarizations in solid oxide fuel cells10.1016/S0167-2738(00)00633-0 ↗
23. Dependence of polarization in anode-supported solid oxide fuel cells on various cell parameters10.1016/j.jpowsour.2004.08.057 ↗
24. The effect of porosity gradient in a Nickel/Yttria stabilized Zirconia anode for an anode-supported planar solid oxide fuel cell10.1016/j.jpowsour.2009.08.043 ↗
25. Ni–YSZ gradient anodes for anode-supported SOFCs10.1016/j.jpowsour.2006.12.042 ↗