journal article·2001-03

Keeping up the pressure — strategies to maintain plate-group pressure and extend the cycle life of VRLA batteries

M.J. Weighall

Journal of Power Sources· Volume 95· Issue 1-2
Publisher page

Abstract

Abstract For valve regulated lead acid (VRLA) applications involving deep cycling, significant cycle life improvement can be achieved by applying pressure to the plates via the compressible recombinant battery separator mat (RBSM). However, the latest work is showing that the plate-group pressure needs to be much higher than previously assumed, in order to inhibit positive active material expansion and capacity loss. This will require changes not only to the separator, but also to the battery design and assembly techniques. Techniques to apply very high pressures to the cell group during battery assembly need to be developed. Changes to the container design and materials may also be needed, and the overall battery design may need to include an internal or external means to maintain the applied pressure throughout battery life. Less compressible separators may also enable higher plate-group pressures to be maintained. This paper will review possible strategies to achieve these objectives of maintaining plate-group pressure and extending VRLA battery cycle life.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Fuel Cells and Related Materials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Takahashi · J. Electrochem. Soc. · 1983 · 130 · 214410.1149/1.2119542 ↗
2. Winsel · J. Power Sources · 1990 · 30 · 20910.1016/0378-7753(93)80078-4 ↗
3. W. Borger, U. Hullmeine, H. Laig-Hörstebrock, E. Meissner, in: T. Keily, B.W. Baxter (Eds.), Power Sources 12, International Power Sources Symposium Committee, Leatherhead, Surrey, UK, 1989.
4. Atlung · J. Power Sources · 1990 · 30 · 13110.1016/0378-7753(93)80069-2 ↗
5. Alzieu · J. Power Sources · 1984 · 13 · 9310.1016/0378-7753(84)87080-9 ↗
6. Pavlov · J. Electrochem. Soc. · 1986 · 133 · 24110.1149/1.2108555 ↗
7. Pavlov · J. Power Sources · 1991 · 33 · 22110.1016/0378-7753(91)85061-Z ↗
8. Proceedings of the First Meeting of The ALABC PCL Study Group, The South Lodge Hotel, Lower Beeding, West Sussex, UK, 23–24 September 1993.
9. Proceedings of the Second Meeting of The ALABC PCL Study Group, The Royal Plaza Hotel, Montreux, Switzerland, 19–20 September 1994.
10. Pavlov · J. Electrochem. Soc. · 1992 · 139 · 307510.1149/1.2069034 ↗
11. CSIRO, ALABC Project AMC-003, Final Report.
12. CSIRO, ALABC Project AMC-009, Final Report.
13. Hawker Batteries, ENTEK International, BE 7297 Task 6, Final Report, Vol. 3, January 1998.
14. CSIRO, ALABC Project B-001.2, Final Report, February 2000.
15. Pendry · J. Power Sources · 1999 · 78 · 5410.1016/S0378-7753(99)00011-7 ↗
16. G.C. Zguris, B.C.I. Convention, April 2000, San Francisco.
17. ZSW Daramic, Sonnenschein, BE97-4085 Task 1(b), 12 month Progress Report, 29th February 2000.
18. Oldham France, Amer-Sil, Hollingsworth and Vose, University of Kassel, BE97-4085 Task 1(a), 12 month Progress Report, 29th February 2000.
19. W.A. Lincoln, The Battery Man, March 2000, pp. 24–32.10.2307/2789783 ↗
20. CSIRO, ALABC Project AMC-007, Final Report.
21. Nelson · Batteries Int. · 2000 · 43 · 51
22. M. Rose, et al, United States Patent, 5,344,466, 6th September 1994.
23. Exide Europe, BE97-4085 Task 1(c), 12 month Progress Report, 29th February 2000.
24. Nelson · Batteries Int. · 1998 · 36 · 95
25. J. Wallace, Keynote Presentation, in: Proceedings of the fifth ALABC Members and Contractors Conference, Nice, France, 28th March 2000.
26. Zguris · J. Power Sources · 1997 · 67 · 30710.1016/S0378-7753(97)02561-5 ↗