journal article·2003-01

Preparation and characterization of thin electrodes for lead–acid batteries

A. Caballero, M. Cruz, L. Hernán, J. Morales, L. Sánchez

Journal of Power Sources· Volume 113· Issue 2
Publisher page

Abstract

Abstract Thin-film electrodes were prepared by spraying aqueous suspensions of soaked leady oxide over both sides of lead sheets previously heated at 150 °C. Uniform coatings of controlled thickness were obtained under optimum deposition conditions. The coatings, which retained their homogeneity after the electrochemical formation, were found to consist of small grains of β-PbO 2 that tended to coalesce into micron-size units. The best electrochemical response was obtained from coatings of reduced thickness (20–40 μm). Cells were found to retain a discharge capacity in excess of 100 Ah/kg after extensive cycling. Also, electrodes exhibited excellent electrochemical performance at different discharge rates. However, if the coating was too thick, the paste was easily sulfated and the cell capacity faded after the first few cycles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advanced battery technologies research · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (6)

Show source-provided references
1. Bhardwaj · J. Power Sources · 2000 · 91 · 5110.1016/S0378-7753(00)00486-9 ↗
2. Cruz · J. Power Sources · 2002 · 108 · 3510.1016/S0378-7753(02)00006-X ↗
3. Martos · Electrochim. Acta · 2001 · 46 · 293910.1016/S0013-4686(01)00512-6 ↗
4. Chen · J. Power Sources · 2000 · 85 · 17210.1016/S0378-7753(99)00397-3 ↗
5. Hill · J. Power Sources · 1990 · 46 · 171
6. Wang · J. Alloys Comp. · 2001 · 327 · 14110.1016/S0925-8388(01)01467-0 ↗