Development of a valve-regulated lead−acid battery with thin tubular positive plates for improved specific energy and optimization for low charge-factor operation
Source abstract
Abstract
Abstract An overview of the design and development of a valve-regulated lead–acid (VRLA) battery with thin tubular plates is presented. Substantially improved specific energy in driving-cycle tests shows how the strategy of increasing the number of plate couples through the production of plates with component thicknesses that are 50% of those for existing technology plates is effective in meeting the requirements of the target application. Exploring the possibilities for removing inactive materials shows how reducing spine material to an extent limited to maintenance of an acceptable metal/active-material surface ratio (‘gamma’ value) by using an elliptical spine is effective, but that further reductions impair cell performance on cycling. Matching recharge characteristics with cell design and controlled initial electrolyte of the cells is discussed in terms of the influence of the oxygen-recombination rate on the recharge response. Changes during stable operation are illustrated in terms of charge response data during long cycle-life with 80% depth-of-discharge and a low, overcharge, viz., 4% C 5 . With an appropriate alloy, thin spines remain intact after more than 1000 cycles of service. Growth and non-penetrating corrosion rates are low for the optimized operating conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced battery technologies research · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (7)
Show source-provided references
1. Pavlov · J. Power Sources · 1995 · 53 · 910.1016/0378-7753(94)02152-S ↗
2. Albert · J. Power Sources · 1997 · 67 · 25710.1016/S0378-7753(97)02556-1 ↗
3. D. Berndt, Maintenance-Free Batteries, Research Studies Press, Taunton, England, 1997 (Sections 8.3 and 13.1.4).
4. EUCAR Traction Battery Group, EV Battery Test Procedure, December 1996, Appendix N (ECE15L).
5. E. Meissner, E. Bashtavelova, A. Winsel, in: Proceedings of the 30th ISATA, 97EL066, pp. 127−134.
6. Peters · J. Power Sources · 1968 · 2 · 1
7. H. Döring, in: Brite Euram Project BE97-4085 ‘Strategies for the Further Improvement of Performance and Life of Lead–Acid Batteries for Electric Vehicle Applications,’ Final Technical Report, Appendix V (Task 2b).