Durability of (Pr0.7Sr0.3)MnO3±δ/8YSZ composite cathodes for solid oxide fuel cells
Source abstract
Abstract
Half cell SOFCs with Durability of (Pr{sub 0.7}Sr{sub 0.3})Mn0{sub 3}{+-}{delta}/8YSZ composite cathodes on 8YSZ electrolytes were aged up to 1000 h at 1000 C in air with/without 0.318 A cm{sup -2} cathodic polarization. During the aging, the performance of the half cell SOFCs was measured using electrochemical impedance spectroscopy (EIS). After aging, the surface of the composite cathode and the interface between the composite cathode and the electrolyte was investigated with scanning electron microscopy (SEM). Chemical element analysis was performed with energy dispersive X-ray spectroscopy (EDS). The performance of the half cell SOFCs degraded after aging with/without polarization compared to the initial state. The SOFCs had a larger polarization resistance after 1000 h of aging. The cathodic current was shown to have an impact on the performance by slowing down the rate of decrease of polarization resistance of the SOFCs. After aging, the microstructural properties--mean pore size increased and cumulative pore volume decreased, and growth of grains was found on the Durability of (Pr{sub 0.7}Sr{sub 0.3})Mn0{sub 3}{+-}{delta} phases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Hoogers · 2003
2. Durability test of SOFC cathodes10.1023/A:1003987318963 ↗
3. Performance/structure correlation for composite SOFC cathodes10.1016/S0378-7753(96)02361-0 ↗
4. The role of electrode microstructure on activation and concentration polarizations in solid oxide fuel cells10.1016/S0167-2738(00)00633-0 ↗
5. LaMnO3 air cathodes containing ZrO2 electrolyte for high temperature solid oxide fuel cells10.1016/0167-2738(92)90161-H ↗
6. Promoting effect of YSZ on the electrochemical performance of YSZ+LSM composite electrodes10.1016/S0167-2738(98)00379-8 ↗
7. Manganite–zirconia composite cathodes for SOFC: influence of structure and composition10.1016/0013-4686(94)00332-U ↗
8. Microstructure and cathodic performance of La0.9Sr0.1MnO3/yttria-stabilized zirconia composite electrodes10.1016/S0013-4686(00)00666-6 ↗
9. Characterization of LSM–YSZ composite electrode by AC impedance spectroscopy10.1016/S0167-2738(01)00877-3 ↗
10. A study of (Pr, Nd, Sm)1−xSrxMnO3 cathode materials for solid oxide fuel cell10.1016/S0167-2738(98)00378-6 ↗
11. A mathematical model of the porous SOFC cathode10.1016/0167-2738(96)00289-5 ↗
12. Imaging of oxygen transport at SOFC cathode/electrolyte interfaces by a novel technique10.1016/S0378-7753(01)01017-5 ↗
13. Doped PrMnO3 perovskite oxide as a new cathode of solid oxide fuel cells for low temperature operation10.1149/1.2048606 ↗
14. Preparation and characterization of Pr1−xSrxMnO3−Δ (X=0, 0.15, 0.3, 0.4, 0.5) as a potential SOFC cathode material operating at intermediate temperatures (500–700°C)10.1016/S0955-2219(97)00038-1 ↗
15. Properties of nonstoichiometric Pr0.6−xSr0.4MnO3 as the cathodes of SOFCs10.1016/S0167-2738(00)00643-3 ↗
16. Chemical interaction and diffusion on interface cathode/electrolyte of SOFC10.1007/s002160051488 ↗
17. Characteristics of Pr1−xMxMnO3 (M=Ca, Sr) as cathode material in solid oxide fuel cells10.1016/S0254-0584(98)80006-0 ↗
18. Ln1−xSrxMnO3 (Ln=Pr, Nd, Sm and Gd) as the cathode material for solid oxide fuel cells10.1016/S0167-2738(98)00440-8 ↗
19. A multiphysics modeling study of (Pr0.7Sr0.3)MnO3±δ8YSZ composite cathodes for solid oxide fuel cells10.1115/1.1842782 ↗
20. Ln0.4Sr0.6Co0.8Fe0.2O3−δ (Ln=La, Pr, Nd, Sm, Gd) for the electrode in solid oxide fuel cells10.1016/S0167-2738(98)00428-7 ↗
21. Effect of impurities on structural and electrochemical properties of the Ni-YSZ interface10.1016/S0167-2738(03)00147-4 ↗
22. A nonlinear least squares fit procedure for analysis of immittance data of electrochemical systems10.1016/0167-2738(86)90031-7 ↗
23. M.J. Jorgensen, Lanthanum manganate based cathodes for solid oxide fuel cells, Ph.D. Dissertation, Riso National Laboratory, Denmark, 2001.
24. Fabrication of high performance (La, Sr)MnO3 cathodes by ion impregnation
25. A comparison of O2 reduction reactions on porous (La, Sr)MnO3 and (La, Sr)(Co, Fe)O3 electrodes10.1016/S0167-2738(01)00997-3 ↗
26. Oxygen reduction mechanism at porous La1−xSrxCoO3−d cathodes/La0.8Sr0.2Ga0.8Mg0.2O2.8 electrolyte interface for solid oxide fuel cells10.1016/S0013-4686(00)00722-2 ↗
27. Cathodic reaction mechanism of dense La0.6Sr0.4CoO3 and La0.81Sr0.09MnO3 electrodes for solid oxide fuel cells10.1016/S0167-2738(00)00466-5 ↗
28. H2–H2O–Ni–YSZ electrode performance and segregation to the interface
29. Electrode behaviour at (La, Sr)MnO3/Y2O3–ZrO2 interface by electrochemical impedance spectroscopy10.1016/S0378-7753(02)00259-8 ↗
30. The degradation of SOFC electrodes10.1016/S0167-2738(97)00106-9 ↗