Micro-computer control for a fuel cell test bench for residential use
Source abstract
Abstract
Great efforts are presently being undertaken to develop fuel cell applications. The Chair of Electrical Power Networks and Renewable Energy Sources at the University of Magdeburg operates a fuel cell test bench which is oriented to fuel cell applications for residential use. Like many test benches of this kind, the control of the plant is done by a classical programmable logic controller (PLC). After numerous measurements and tests were carried out, it could be noted that the process power of the PLC is limited considering the improvement of dynamic behaviour of a fuel cell system and taking over extensive calculation tasks. Furthermore, an automatic measuring procedure is desirable for long-term investigations. An interface is therefore necessary for the superordinate PC-based measurement and system control in order to vary specific parameters dependent on the experimental process which have not yet been realised. Additionally, it can be noted that an economical and ecological operation of a fuel cell plant is only possible if the design considers the entire heating system. The combination of both tasks in a common control is useful. The micro-computer control as a standard solution is available for the superordinate combined control of heating systems and block-type thermal power stations using combustion engines. This control system will now be modified in close co-operation with the suppliers for the test stand control.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advanced Control Systems Optimization · Mass Spectrometry Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (5)
Show source-provided references
1. Technical documentation of the fuel cell test bench at the Chair Electric Power Networks and Renewable Energy Sources of the University Magdeburg issued by the Firme ZSW in Ulm, http://www.zsw-bw.de.
2. 2002 Product catalog of the firm PHYTEC Technology Holding AG, http://www.phytec.de.
3. Technical documentation “phy555 Trägerboard” of the firm IEP Ingenieurbüro für Echzeitprogrammierung Hannover, as of 12 October 2001, http://www.iep.de.
4. Technical brochure of the firm energiekontor in H annover, http://www.energiekontor-hannover.de, 8 April 2002.
5. Test report about the sinus inverter in the fuel cell test stand at the Chair Electric Power Networks and Renewable Energy Sources, COO.1000.1600.2.58861-1, 5 November 2001.