journal article·2003-01

Catalytic burner for an indirect methanol fuel cell vehicle fuel processor

Meenakshi Sundaresan, Sitaram Ramaswamy, Robert M. Moore, Myron A. Hoffman

Journal of Power Sources· Volume 113· Issue 1
Publisher page

Abstract

Abstract Major impediments to the wide-scale implementation of hydrogen/air fuel cell vehicles are the lack of hydrogen infrastructure and on-board hydrogen storage. One proposed source of hydrogen exists in the development of on-board methanol (and other hydrocarbon) fuel processors. Packaging limitations and fuel processor performance constraints on efficiency and transient response play key roles in vehicular applications. These constraints may be addressed by considering proper thermal integration between two major components of the fuel processor: the reformer and catalytic burner. The focus of this research is on the effects of the catalytic burner on reformer performance in a thermally well-integrated configuration. Specifically, the work has focused on the generation of a detailed numerical model incorporating kinetics and mass and heat transfer to accurately characterize the burner. Unlike a simple, thermodynamic model, the detailed model provides a level of complexity necessary to understand the impact of thermal integration on reformer transient response, reformate composition, and emissions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. H.K. Geyer, R.K. Ahluwalia, R. Kumar, in: Proceedings of the 31st IECEC on Dynamic Response of Steam-Reformed, Methanol-Fueled, Polymer Electrolyte Fuel Cell Systems, Washington, DC, USA, vol. 2, 1996, pp. 1101–1106.10.1109/IECEC.1996.553861 ↗
2. Fundamental factors in the design of a fast-responding methanol-to-hydrogen steam reformer for transportation applications
3. Fuel cell drive system with hydrogen generation in test10.1016/S0378-7753(99)00495-4 ↗
4. R.A.J. Dams, P.R. Hayter, S.C. Moore, The development and evaluation of compact, fast response integrated methanol reforming fuel processor systems for PEMFC electric vehicles, SAE Paper No. 2000-01-0010.10.4271/2000-01-0010 ↗
5. van Driel, Marinus, Meijer, Marianne, A Novel Compact Steam Reformer for Fuel Cells, with Heat Generation by Catalytic Combustion Augmented by Induction Heating, 1998 Fuel Cell Seminar, Palm Springs, CA, 1998.
6. Modeling the integration of a compact plate steam reformer in a fuel cell system10.1016/S0378-7753(99)00482-6 ↗
7. G.L. Ohl, Dynamic analysis of a methanol to hydrogen steam reformer for transportation application, Ph.D. dissertation, University of Michigan, 1995.
8. The start-up characteristics of a catalytic combustor using a methanol mixture
9. Afterburner catalysts-effects of heat and mass transfer between gas and catalyst surface
10. Radiative exchange between square parallel channels in a concentric monolith structure10.1016/0017-9310(95)00222-7 ↗
11. S. Chalk, Progress Report for Fuel Cell Power Systems, US DOE, October 2000.10.2172/775907 ↗
12. Hydrogen Production by Steam Reforming of Methanol for Polymer Electrolyte Fuel Cells10.1016/0360-3199(94)90117-1 ↗
13. A compact CO selective oxidation reactor for solid polymer fuel cell powered vehicle application10.1016/S0378-7753(99)00427-9 ↗
14. Catalytic fuel combustion—a way of reducing emission of nitrogen oxides10.1080/01614949009349940 ↗
15. A. Cybulski, J.A.Moulijn (Eds.), Structured Catalysts and Reactors, Marcel-Dekker, New York, 1998, p. 151.
16. I. Glassman, Combustion, 1st ed., Academic Press, New York, 1977, pp. 210–223.10.1016/B978-0-12-285850-5.50007-6 ↗
17. K. Wark, C.T. Warner, Air Pollution, Harper and Row, New York, 1981, pp. 376–384.
18. The oxidation of nitrogen in combustion and explosions
19. R.D. Lide (Ed.), CRC Handbook of Chemistry and Physics, CRC Press, Boca Raton, 1999, pp. 5–81, 5–82.
20. P.F. Incropera, D.P. De Witt, Fundamentals of Heat and Mass Transfer, 3rd ed., Wiley, New York, 1990.
21. R.J. Farrauto, C.H. Bartholomew, Fundamentals of Industrial Catalytic Processes, Blackie Academic and Professional, London, New York, 1997, p. 376.
22. D.R. Lide (Ed.), CRC Handbook of Chemistry and Physics, 81st ed., CRC Press, Boca Raton, 2000–2001, pp. 12–202,12–205.
23. M.B. Bever (Ed.), Encyclopedia of Materials Science and Engineering, vol. 2, Pergamon Press, Oxford, 1986, p. 854.