journal article·2001-10

Carbon monoxide yield in natural gas autothermal reforming process

S.H Chan, H.M Wang

Journal of Power Sources· Volume 101· Issue 2
Publisher page

Abstract

This study presents the effect of natural gas (NG) composition on carbon monoxide (CO) yield in the products of an autothermal reforming (ATR) process. Since NG is a mixture without definite composition, a computer routine is coded, which is able to randomly generate various compositions whose individual constituents fall within the defined ranges Then each NG is analyzed based on the ATR process within optimal ranges of the air-to-fuel ratio (AFR) and water-to-fuel ratio (WFR), which were obtained from a typical composition of NG under the constraints of maximum hydrogen production, minimum carbon monoxide yield, and free from solid carbon in the reformate. Finally, the correlation between NG composition and carbon monoxide yield is established. This provides valuable information for the development of methods for the clean-up of carbon monoxide.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Catalysts for Methane Reforming · Process Optimization and Integration · Catalysis and Hydrodesulfurization Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. K. Sjostrom, Fuel converter with methanol for spark ignition internal combustion engine, in: Proceedings of the International Symposium on Alcohol Fuel Technology, Vol. 3, Wolfsburg, 21–23 November 1977.
2. T. Inagaki, T. Hirota, Z. Veno, Combustion and emission of gaseous fuel from reformed methanol in automotive engine, in: Proceedings of the Third International Symposium on Alcohol Fuel Technology, Asilomer, CA, May 1979.
3. K. Jost, Gasoline reforming fuel cell, Automotive Engineering, 1997, pp. 151–152.
4. M. Krumpelt, S. Ahmed, R. Kumar, Partial oxidation reforming of methanol, in: Proceedings of the 1996 EPRI/GRI Fuel Cell Workshop on Fuel Cell Technology Research and Development, Tempe, AZ 2–3 April 1996.
5. Onboard hydrogen generation for transport applications: the Hot Spot methanol processor10.1016/S0378-7753(97)02797-3 ↗
6. Cost reductions of fuel cells for transport applications: fuel processing options10.1016/S0378-7753(97)02796-1 ↗
7. T.J. Flynn, R.M. Privette, Compact Fuel Processor for Fuel Cell-Powered Vehicles, SAE paper No. 99P-214, 1998.10.4271/1999-01-0536 ↗
8. P. Davis, J. Millikan, D. Lee, S. Chalk, Fuel Cells for Transportation, Report from US Department of Energy Office of Advanced Automotive Technologies, June 1999.
9. J.H. Hirschenhofer, D.B. Stauffer, R.R. Engleman, M.G. Klett, Fuel Cell Handbook, 4th Edition, 1998.
10. British Standard, Natural Gas — Calculation of Compression Factor. Part 1. Introduction and Guidelines, BS ISO 12213-1, 1997.
11. British Standard, Natural Gas — Calculation of Compression Factor. Part 2. Calculation Using a Molar Composition Analysis, BS ISO 12213-2, 1997.
12. C.R. Ferguson, Internal Combustion Engines — Applied Thermosciences, Wiley, USA, 1986.
13. S. Gordon, B.J. McBride, NASA SP-273, USA, 1971.
14. Effect of natural gas composition on autothermal fuel reforming products10.1016/S0378-3820(00)00065-5 ↗
15. Thermodynamic analysis of natural gas fuel processing for fuel cell applications10.1016/S0360-3199(99)00063-4 ↗