Sandwich confinement engineering of tin sulfide in nitrogen/sulfur-co-doped hollow carbon spheres for efficient sodium storage
Source abstract
Abstract
Due to the ultralow sodium-ion storage capacity (300 mAh g −1 ) of carbon materials, incorporating high-capacity components into a carbon matrix has attracted wide attention. To maximize the advantages of high-sodium-storage-capacity composites and mitigate common drawbacks (volume expansion, poor electronic conductivity, and sluggish Na + diffusion kinetics), the microstructural and morphological optimization of the carbon matrix is crucial. Herein, a sandwich confinement strategy was developed to confine SnS — a high-sodium-storage-capacity — within N/S-co-doped hollow double carbon layered spheres (SnS@h-NSCs). Robust Sn-C and C-S bonds promote structural stability and strong interfacial interactions between SnS and the N/S-co-doped carbon matrix. With increasing SnS loading, the optimized double-layer carbon matrix in SnS@h-NSCs efficiently alleviated volume expansion and enhanced electronic conductivity and facilitated Na + migration kinetics. As a result, the anodic SnS@h-NSCs in sodium-ion batteries exhibited significant improvements in initial discharge capacities from 464 to 710 mAh g −1 and the initial Coulombic efficiencies from 50.5 to 68.3 % compared to hollow N-doped carbon spheres (h-NCs). Low-SnS-loading SnS@h-NSCs showed excellent reversibility, while high SnS-loading SnS@h-NSCs exhibited a moderate capacity fading after 100 cycles, highlighting the importance of structural integrity through strong SnS‒carbon interactions (Sn‒C and C‒S bonds) in mitigating the volume expansion, and promoting stability, efficient electron transport, and Na + migration, and underscoring the challenge of maintaining structural integrity at elevated active material content. Summary:A sandwich confinement strategy encapsulated high-capacity SnS within N/S-co-doped hollow carbon spheres (SnS@h-NSCs), enhancing sodium-ion battery performance by addressing volume expansion, poor conductivity, and sluggish Na + kinetics. Strong Sn–C and C–S bonds ensured structural integrity, enabling high initial capacities and efficiency. • A sandwich confinement strategy embeds SnS into N/S-doped hollow carbon spheres. • Strong Sn–C and C–S bonds ensure stability and enhance interfacial contact. • The carbon matrix alleviates SnS volume expansion and boosts Na + kinetics. • SnS@h-NSCs improve discharge capacity and coulombic efficiency over h-NCs. • Low SnS loading maintains reversibility, and high loading causes moderate fading.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. Advances in carbon materials for sodium and potassium storage
2. Carbon nanotubes for lithium ion batteries10.1039/b904116h ↗
3. Macroscopic-scale three-dimensional carbon nanofiber architectures for electrochemical energy storage devices10.1002/aenm.201700826 ↗
4. J. High capacity anode materials for rechargeable sodium-ion batteries10.1149/1.1393348 ↗
5. Research progress of carbon materials in the anodes of sodium-ion batteries10.1016/j.jpowsour.2024.235721 ↗
6. Commercialization of lithium battery technologies for electric vehicles10.1002/aenm.201900161 ↗
7. Electrode materials for rechargeable sodium-ion batteries: potential alternatives to current lithium-ion batteries10.1002/aenm.201200026 ↗
8. Na-ion batteries, recent advances and present challenges to become low cost energy storage systems10.1039/c2ee02781j ↗
9. Reconfiguring hard carbons with emerging sodium-ion batteries: a perspective10.1002/adma.202212186 ↗
10. Hard carbon for sodium-ion batteries: progress, strategies and future perspective10.1039/D4SC00734D ↗
11. Nanoengineering carbon spheres as nanoreactors for sustainable energy applications10.1002/adma.201903886 ↗
12. Doping carbons beyond nitrogen: an overview of advanced heteroatom doped carbons with boron, sulphur and phosphorus for energy applications10.1039/c3ee41444b ↗
13. Recent progress on nitrogen/carbon structures designed for use in energy and sustainability applications10.1039/C3EE44078H ↗
14. Heteroatom doping: an effective way to boost sodium ion storage10.1002/aenm.202000927 ↗
15. Revitalizing sodium-ion batteries via controllable microstructures and advanced electrolytes for hard carbon10.1016/j.esci.2023.100181 ↗
16. Filling carbon: a microstructure-engineered hard carbon for efficient alkali metal ion storage10.1039/D3EE01154B ↗
17. Recent advances in carbon-based electrodes for energy storage and conversion10.1002/advs.202301045 ↗
18. Sodium storage mechanism of N, S co-doped nanoporous carbon: experimental design and theoretical evaluation10.1016/j.ensm.2017.09.003 ↗
19. SnS nanosheets confined growth by S and N codoped graphene with enhanced pseudocapacitance for sodium-ion capacitors10.1021/acsami.9b14098 ↗
20. Hierarchical assembly and superior lithium/sodium storage properties of a flowerlike C/SnS@C nanocomposite10.1016/j.electacta.2018.11.102 ↗
21. Tin-based anode materials for stable sodium storage: progress and perspective
22. Redox reaction of Sn-polyacrylate electrodes in aprotic Na cell10.1016/j.elecom.2012.05.017 ↗
23. Two-dimensional SnO anodes with a tunable number of atomic layers for sodium ion batteries10.1021/acs.nanolett.6b05280 ↗
24. SnO2@graphene nanocomposites as anode materials for Na-ion batteries with superior electrochemical performance10.1039/c3cc40448j ↗
25. Synergistic Na-storage reactions in Sn4P3 as a high-capacity, cycle-stable anode of Na-ion batteries10.1021/nl404637q ↗
26. Lithium azides induced SnS quantum dots for ultra-fast and long-term sodium storage10.1002/smll.202302188 ↗
27. SnS2 nanoplatelet@graphene nanocomposites as high-capacity anode materials for sodium-ion batteries10.1002/asia.201400018 ↗
28. Two-dimensional tin disulfide nanosheets for enhanced sodium storage10.1021/acsnano.5b05229 ↗
29. Microstructural evolution of tin nanoparticles during in situ sodium insertion and extraction10.1021/nl303305c ↗
30. Enhanced sodium-ion battery performance by structural phase transition from two-dimensional hexagonal-SnS2 to orthorhombic-SnS10.1021/nn503582c ↗
31. Tin and tin compounds for sodium ion battery anodes: phase transformations and performance10.1021/acs.accounts.5b00114 ↗
32. SnS 3D flowers with superb kinetic properties for anodic use in next-generation sodium rechargeable batteries10.1002/smll.201503168 ↗
33. Aerosol-assisted rapid synthesis of SnS-C composite microspheres as anode material for Na-ion batteries10.1007/s12274-014-0648-z ↗
34. Electrochemical performance of porous carbon/tin composite anodes for sodium-ion and lithium-ion batteries10.1002/aenm.201200346 ↗
35. Tin-coated viral nanoforests as sodium-ion battery anodes10.1021/nn400601y ↗
36. SnS nanoparticles electrostatically anchored on three-dimensional N-doped graphene as an active and durable anode for sodium-ion batteries10.1039/C7EE01628J ↗
37. Ultrasmall SnS quantum dots anchored onto nitrogen-enriched carbon nanospheres as an advanced anode material for sodium-ion batteries10.1021/acsami.9b18997 ↗
38. Layered SnS2-reduced graphene oxide composite-a high-capacity, high-rate, and long-cycle life sodium-ion battery anode material10.1002/adma.201306314 ↗
39. Encapsulating sulfides into tridymite/carbon reactors enables stable sodium ion conversion/alloying anode with high initial coulombic efficiency over 89%
40. Array of nanosheets render ultrafast and high-capacity Na-ion storage by tunable pseudocapacitance10.1038/ncomms12122 ↗
41. A general strategy to fabricate carbon-coated 3D porous interconnected metal sulfides: case study of SnS/C nanocomposite for high-performance lithium and sodium ion batteries10.1002/advs.201500200 ↗
42. Size effects in sodium ion batteries10.1002/adfm.202106047 ↗
43. 3D graphene networks encapsulated with ultrathin SnS nanosheets@hollow mesoporous carbon spheres nanocomposite with pseudocapacitance-enhanced lithium and sodium storage kinetics
44. C-plasma of hierarchical graphene survives SnS bundles for ultrastable and high volumetric Na-ion storage
45. Graphene-like carbon film wrapped tin (II) sulfide nanosheet arrays on porous carbon fibers with enhanced electrochemical kinetics as high-performance Li and Na ion battery anodes10.1002/advs.201903045 ↗
46. Ultradispersed nanoarchitecture of SnS nanoparticles/reduced graphene oxide for enhanced sodium storage performance10.1016/j.jcis.2017.03.056 ↗
47. Tin sulfide-based nNanohybrid for high-performance anode of sodium-ion batteries10.1002/smll.201700767 ↗
48. An ultralong-life SnS-based anode through phosphate-induced structural regulation for high-performance sodium ion batteries10.1016/j.scib.2022.09.021 ↗
49. Sulfur-mediated interface engineering enables fast SnS nanosheet anodes for advanced lithium/sodium-ion batteries10.1021/acsami.0c03860 ↗
50. Interface engineering of metal sulfides-based composites enables high-performance anode materials for sodium-ion batteries10.1016/j.jcis.2024.02.161 ↗
51. Pomegranate-inspired SnS/ZnS@C heterostructural nanocubes towards high-performance sodium ion battery10.1016/j.apsusc.2019.143631 ↗
52. Engineering of yolk-double shell cube-like SnS@N-S codoped carbon as a high-performance anode for Li- and Na-ion batteries10.1021/acsami.9b14287 ↗
53. Hollow spheres consisting of SnS nanosheets conformally coated with S‐doped carbon for advanced lithium‐/sodium‐ion battery anodes10.1002/celc.201901923 ↗
54. Hierarchical microboxes constructed by SnS nanoplates coated with nitrogen-doped carbon for efficient sodium storage10.1002/anie.201810729 ↗
55. Hierarchical nanotubes constructed by carbon-coated ultrathin SnS nanosheets for fast capacitive sodium storage10.1002/anie.201706652 ↗
56. Elucidating the synergistic behavior of orientation‐controlled SnS nanoplates and carbon layers for high‐performance lithium‐ and sodium‐ion batteries
57. Sn-C bonding riveted SnSe nanoplates vertically grown on nitrogen-doped carbon nanobelts for high-performance sodium-ion battery anodes10.1016/j.nanoen.2018.10.019 ↗
58. Sn-C and Se-C co-bonding SnSe/few-layered graphene micro-nano structure: route to a densely compacted and durable anode for lithium/sodium-ion batteries10.1021/acsami.9b12204 ↗
59. Ex‐situ raman microscopic investigation of the high‐order polysulfide restriction of encapsulated sulfur nanowires
60. Multilevel hollow phenolic resin nanoreactors with precise metal nanoparticles spatial location toward promising heterogeneous hydrogenations
61. Resorcinol-formaldehyde resins as metal-free semiconductor photocatalysts for solar-to-hydrogen peroxide energy conversion10.1038/s41563-019-0398-0 ↗
62. Synthesis of SnO2 pillared carbon using long chain alkylamine grafted graphene oxide: an efficient anode material for lithium ion batteries10.1039/C5NR06680H ↗
63. Nitrogen and sulfur co-doped porous carbon derived from human hair as highly efficient metal-free electrocatalysts for hydrogen evolution reactions10.1039/C5TA01209K ↗
64. Sulphur-doped reduced graphene oxide sponges as high-performance free-standing anodes for K-ion storage10.1016/j.nanoen.2018.08.075 ↗
65. Morphology-/microstructure-regulated nickel/nitrogen-co-doped monodisperse hollow carbon spheres for controlled electrochemical CO2 reduction to syngas10.1016/j.jcis.2025.03.031 ↗
66. Gas sensing properties of PLD grown 2D SnS film: effect of film thickness, metal nanoparticle decoration, and in situ KPFM investigation10.1002/smll.202307037 ↗
67. Pseudocapacitive porous hard carbon anode with controllable pyridinic nitrogen and thiophene sulfur co-doping for high-power dual-carbon sodium ion hybrid capacitors10.1039/D1TA05755C ↗
68. Dual‐shelled hollow leafy carbon support with atomically dispersed (N,S)‐bridged hydroxy‐coordinated asymmetric Fe sites for oxygen reduction10.1002/adfm.202401484 ↗
69. Effect of visible light and electrode wetting on the capacitive performance of S- and N-doped nanoporous carbons: importance of surface chemistry10.1016/j.carbon.2014.07.038 ↗
70. Stability assessment of organic sulfur and organosulfate compounds in filter samples for quantification by Fourier- transform infrared spectroscopy10.5194/amt-16-3515-2023 ↗
71. A Schiff base based on triphenylamine and thiophene moieties as a fluorescent sensor for Cr (III) ions: synthesis, characterization and fluorescent applications10.1016/j.ica.2020.119676 ↗
72. Disulfide vibrational spectra in the sulfur and carbon sulfur stretching region10.1021/j100628a010 ↗
73. Tin(II) sulfide (SnS) nanosheets by liquid-phase exfoliation of herzenbergite: IV-VI main group two-dimensional atomic crystals10.1021/jacs.5b08236 ↗
74. N-S co-doped C@SnS nanoflakes/graphene composite as advanced anode for sodium-ion batteries10.1016/j.cej.2018.07.157 ↗
75. Carbon-doped SnS2 nanostructure as a high-efficiency solar fuel catalyst under visible light10.1038/s41467-017-02547-4 ↗
76. Highly nitrogen doped carbon nanofibers with superior rate capability and cyclability for potassium ion batteries10.1038/s41467-018-04190-z ↗
77. Hollow carbon nanospheres with superior rate capability for sodium‐based batteries10.1002/aenm.201100691 ↗
78. Microstructure-tuned tin-embedded N-doped hollow carbon spheres for advanced lithium-ion batteries
79. The C-S/C=S bonds synergistically modify porous hollow‐carbon‐nanocages anode for durable and fast sodium‐ion storage10.1002/adfm.202400020 ↗
80. Constructing heterojunction-induced oxygen vacancies of N-doped carbon-encapsulated Sn/SnOx microplates for boosting lithium storage capability10.1016/j.cej.2024.152983 ↗
81. Construction of 1D conductive Ni-MOF nanorods with fast Li+ kinetic diffusion and stable high-rate capacities as an anode for lithium ion batteries10.1039/C9NA00616H ↗