journal article·2025-06Open access

Printing guidelines for extrusion-based additive manufacturing with potential use in lithium-ion battery

Yangyang Li, Binghuan Gao, Sujin Park, Seongwan Jang, Hyeonjin Son, Chang-Jun Bae

Abstract

Extrusion-based additive manufacturing significantly affects the performance of lithium-ion battery through structural heterogeneities, while there are no printing guidelines able to predict accuracy of printed features. Herein, an empirical model for geometric prediction is proposed and verified to fabricate 3D battery based on fundamental understanding of ink rheology and printing behavior. Lower viscosity of ink rheology is associated to the continuous phases homogeneously dispersed from lithium cobalt oxide and Super P, while adding more Super P induces lower shear rate due to higher viscosity resulted from the discontinuous phases of agglomerated Super P and voids under applied flow stress. Printing behavior enabling tunable line width relies on the synergistic interaction of ink rheology and processing condition, where controlling of the stretching region in thinning mode determines the printed line width under specific extrudate volume and moving speed. Furthermore, fluid dynamics combining with Darcy-Weisbach equation provides a model to predict the printing accuracy by calculating the flow rate and pressure drop, which exhibits a high consistency with experimental observations owing to the comprehensive consideration of various ink properties and printing parameters. This study provides systematic electrode printing guidelines for extrusion-based additive manufacturing, offering valuable insights for the development of high-performance lithium-ion batteries. • Systematic printing guidelines for manipulating printing geometry. • Ink rheology with moderate internal friction leads to smooth ink extrusion. • Synergy between ink property and printing conditions for high-quality printing. • Accurate parametric model for printing prediction.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Recycling and Waste Management Techniques · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Fast charging of lithium‐ion batteries: a review of materials aspects10.1002/aenm.202101126 ↗
2. Lithium batteries: status, prospects and future10.1016/j.jpowsour.2009.11.048 ↗
3. Overview on the applications of three-dimensional printing for rechargeable lithium-ion batteries10.1016/j.apenergy.2019.114002 ↗
4. Emerging 3D-printed electrochemical energy storage devices: a critical review10.1002/aenm.201700127 ↗
5. Direct ink writing based 4D printing of materials and their applications10.1002/advs.202001000 ↗
6. Direct ink writing of 3D functional materials10.1002/adfm.200600434 ↗
7. Design of battery electrodes with dual-scale porosity to minimize tortuosity and maximize performance10.1002/adma.201204055 ↗
8. Additive manufacturing of batteries10.1002/adfm.201906244 ↗
9. 3D direct writing fabrication of electrodes for electrochemical storage devices10.1016/j.jpowsour.2017.04.042 ↗
10. 3D printing of interdigitated Li-ion microbattery architectures10.1002/adma.201301036 ↗
11. A universal strategy towards 3D printable nanomaterial inks for superior cellular high-loading battery electrodes10.1039/D1TA03236D ↗
12. 3D printing of graphite electrode for lithium‐ion battery with high areal capacity10.1002/ente.202100628 ↗
13. 3D printed hierarchically-porous microlattice electrode materials for exceptionally high specific capacity and areal capacity lithium ion batteries
14. Toward high areal energy and power density electrode for Li-ion batteries via optimized 3D printing approach10.1021/acsami.8b14797 ↗
15. A hybrid three-dimensionally structured electrode for lithium-ion batteries via 3D printing10.1016/j.matdes.2017.01.088 ↗
16. 3D printing of clay for decorative architectural applications: effect of solids volume fraction on rheology and printability
17. Direct ink writing of three-dimensional ceramic structures10.1111/j.1551-2916.2006.01382.x ↗
18. Analytical modeling of deposited filaments for high viscosity material-based piston-driven direct ink writing10.1007/s00170-022-10511-w ↗
19. Rheological properties and stability of NMP based cathode slurries for lithium ion batteries10.1016/j.ceramint.2013.08.137 ↗
20. 3D-Printed cathodes of LiMn1−xFexPO4Nanocrystals achieve both ultrahigh rate and high capacity for advanced lithium-ion battery10.1002/aenm.201600856 ↗
21. Determination of lithium-ion battery state-of-health based on constant-voltage charge phase10.1016/j.jpowsour.2014.02.020 ↗
22. High-mass-loading electrodes for advanced secondary batteries and supercapacitors10.1007/s41918-020-00093-0 ↗
23. Direct ink writing of materials for electronics-related applications: a mini review10.3389/fmats.2021.647229 ↗
24. Direct ink writing of macroporous lead‐free piezoelectric Ba0.85Ca0.15Zr0.1Ti0.9O310.1111/jace.16220 ↗
25. Rheological behavior of titania ink and mechanical properties of titania ceramic structures by 3D direct ink writing using high solid loading titania ceramic ink10.1016/j.jallcom.2018.12.334 ↗
26. Study on 3D-Direct Ink Writing based on adding silica submicron-particles to improve the rheological properties of alumina ceramic ink
27. Effective viscosity of nanofluids — a modified Krieger–Dougherty model based on particle size distribution (PSD) analysis10.1016/j.molliq.2016.10.137 ↗
28. On different ways of measuring “the” yield stress10.1016/j.jnnfm.2016.11.001 ↗
29. Development of highly energy densified ink for 3D printable batteries10.1002/ente.201800279 ↗
30. Highly conductive graphene/carbon black screen printing inks for flexible electronics10.1016/j.jcis.2020.07.106 ↗
31. Rheological characterisation of ceramic inks for 3D direct ink writing: a review10.1016/j.jeurceramsoc.2021.08.031 ↗
32. Viscosity data for Al2O3–water nanofluid—hysteresis: is heat transfer enhancement using nanofluids reliable?10.1016/j.ijthermalsci.2007.01.033 ↗
33. Dispersion and rheology of nickel nanoparticle inks10.1007/s10853-005-3659-z ↗
34. A new 3D printing strategy by harnessing deformation, instability, and fracture of viscoelastic inks
35. Balmforth · 2004
36. Analytical study and experimental verification of shear-thinning ink flow in direct ink writing process10.1115/1.4056926 ↗
37. A systematic printability study of direct ink writing towards high-resolution rapid manufacturing10.1088/2631-7990/acd090 ↗
38. Friction factor-Reynolds number relationship for laminar flow of non-Newtonian fluids in open channels of different cross-sectional shapes10.1016/j.ces.2010.02.040 ↗
39. Pressure loss equations for laminar and turbulent non-Newtonian pipe flow10.1061/(ASCE)0733-9429(1998)124:5(522) ↗
40. Complex ink flow mechanisms in micro-direct-ink-writing and their implications on flow rate control
41. A comparative investigation of carbon black (Super-P) and vapor-grown carbon fibers (VGCFs) as conductive additives for lithium-ion battery cathodes10.1039/C5RA19056H ↗