Thermo-electrochemical and mechanical analysis of the direct internal reforming solid oxide fuel cell stack using a validated numerical model
Source abstract
Abstract
Direct internal reforming solid oxide fuel cell (DIR-SOFC) powered by hydrogen blended natural gas offer promising prospects for commercialization due to their efficiency and fuel flexibility. Nevertheless, challenges such as durability, temperature non-uniformity, and mechanical reliability hinder their development. This study presents a novel 3D thermo-electrochemical-mechanical model for both single cells and stacks, validated by segmented cell data to ensure accuracy. The accuracy of the cell model predictions is validated against the experimental local polarization curves and detailed temperature distribution under various H 2 blending ratios and steam to carbon ratios. Results reveal significant temperature non-uniformity within the stack due to competing endothermic and exothermic reactions, affecting both electrochemical performance and mechanical stress distribution. Operating the stack at a thermal-neutral voltage about 0.6–0.8 V per cell not only lower the stack temperature therefore minimizing the cooling requirement, but also mitigates thermal stress, reducing the risk of mechanical failure below 0.05. This proposed 3D model provides new insights into optimizing DIR-SOFC stack design and enhancing its commercial viability.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Chemical Looping and Thermochemical Processes · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Macroscopic modeling of solid oxide fuel cell (SOFC) and model-based control of SOFC and gas turbine hybrid system10.1016/j.pecs.2017.12.002 ↗
2. Comprehensive review of methane conversion in solid oxide fuel cells: prospects for efficient electricity generation from natural gas10.1016/j.pecs.2015.10.004 ↗
3. The role of hydrogen and fuel cells in the global energy system10.1039/C8EE01157E ↗
4. Economic study of a large-scale renewable hydrogen application utilizing surplus renewable energy and natural gas pipeline transportation in China
5. 2024
6. Advances on methane reforming in solid oxide fuel cells10.1016/j.rser.2022.112646 ↗
7. Solid oxide fuel cells fueled by simulated biogas: comparison of anode modification by infiltration and reforming catalytic layer10.1016/j.cej.2020.124755 ↗
8. High-performance fuel cell designed for coking-resistance and efficient conversion of waste methane to electrical energy10.1039/D0EE00070A ↗
9. Performance and long-term durability of direct-methane flat-tube solid oxide fuel cells with symmetric double-sided cathodes10.1016/j.ijhydene.2019.09.126 ↗
10. Performance study of solid oxide fuel cell with Ni-foam indirect internal reformer: intrinsic reforming kinetics and temperature uniformity10.1016/j.cej.2022.141170 ↗
11. A theoretical framework for multiphysics modeling of methane fueled solid oxide fuel cell and analysis of low steam methane reforming kinetics10.1016/j.apenergy.2016.05.049 ↗
12. Multiphysical modelling of planar solid oxide fuel cell stack layers10.1016/j.jpowsour.2019.227552 ↗
13. Multi-physics field modeling of biomass gasification syngas fueled solid oxide fuel cell10.1016/j.jpowsour.2021.230470 ↗
14. Construction of a transient multi-physics model of solid oxide fuel cell fed by biomass syngas considering the carbon deposition and temperature effect10.1016/j.cej.2022.136159 ↗
15. Thermo-electrochemical modelling of high temperature methanol-fuelled solid oxide fuel cells10.1016/j.apenergy.2021.116832 ↗
16. Multi-physics modeling of a symmetric flat-tube solid oxide fuel cell with internal methane steam reforming10.1016/j.ijhydene.2022.08.236 ↗
17. Optimization studies of intake parameters for direct internal reforming solid oxide fuel cell10.1016/j.ijhydene.2024.07.021 ↗
18. A finite element analysis modeling tool for solid oxide fuel cell development: coupled electrochemistry, thermal and flow analysis in MARC10.1016/j.jpowsour.2003.11.074 ↗
19. Continuum scale modelling and complementary experimentation of solid oxide cells10.1016/j.pecs.2020.100902 ↗
20. Mass transport limitation in inlet periphery of fuel cells: studied on a planar Solid Oxide Fuel Cell10.1016/j.ijhydene.2018.07.030 ↗
21. Electrochemical model of solid oxide fuel cell for simulation at the stack scale, I. Calibration procedure on experimental data10.1149/1.3596433 ↗
22. Insight into mechanism of boosted oxygen reduction reaction in mixed-conducting composite cathode of solid oxide fuel cell via a novel open-source pore-scale model
23. A multiscale model validated on local current measurements for understanding the solid oxide cells performances10.1016/j.jpowsour.2022.232499 ↗
24. Spatial distribution of electrochemical performance in a segmented SOFC: a combined modeling and experimental study10.1002/fuce.200900083 ↗
25. Measurement of transient temperature distribution behavior of a planar solid oxide fuel cell: effect of instantaneous switching of power generation and direct internal reforming10.1016/j.jpowsour.2020.229070 ↗
26. Reliability of the numerical SOFC models for estimating the spatial current and temperature variations10.1016/j.ijhydene.2016.06.194 ↗
27. Simultaneous characterizations of segmented electrochemical characteristics and temperature distribution in the hythane-fueled direct internal reforming solid oxide fuel cell10.1016/j.cej.2023.141822 ↗
28. Spatially resolved electrochemical performance and temperature distribution of a segmented solid oxide fuel cell under various hydrogen dilution ratios and electrical loadings10.1016/j.jpowsour.2022.231477 ↗
29. Assessing performance degradation induced by thermal cycling in solid oxide cells10.1016/j.enconman.2022.116239 ↗
30. Thermo-electro-chemo-mechanical modeling of solid oxide fuel cell for stress and failure evolution during duty cycle10.1149/1945-7111/abf4ef ↗
31. Long-term thermo-mechanical performance evolution of a 15-cell solid oxide fuel cell stack10.1016/j.ijhydene.2024.03.141 ↗
32. Modeling of thermal impacts in a single direct methane steam reforming solid oxide fuel cell10.1016/j.jpowsour.2020.228605 ↗
33. Thermo-chemo-mechanical analysis of protonic ceramic electrolysis cell: a statistically-designed numerical study10.1016/j.ijhydene.2024.02.208 ↗
34. Modeling and evaluating of thermo-electro-chemo-mechanical behavior for pre-reformed methane-fueled solid oxide fuel cell10.1016/j.jpowsour.2022.230981 ↗
35. Modeling and parametric simulations of solid oxide fuel cells with methane carbon dioxide reforming10.1016/j.enconman.2013.02.008 ↗
36. Compilation of mechanical properties for the structural analysis of solid oxide fuel cell stacks. Constitutive materials of anode-supported cells10.1016/j.ceramint.2012.01.043 ↗
37. In situ infrared thermography of full-scale solid oxide fuel cell10.1016/j.jpowsour.2019.227221 ↗
38. Endplate effect in an open-cathode proton exchange membrane fuel cell stack: phenomenon and resolution10.1016/j.renene.2023.119392 ↗