Hierarchical reaction analysis of the effect of high-temperature storage on the electrode characteristics and safety of high-nickel cathodes
Source abstract
Abstract
Layered cathode materials such as LiNi xMn yCo zO 2 (NMC) are widely regarded for their high energy density and cost-effectiveness. However, the increasing nickel content required for higher energy performance introduces significant safety concerns, particularly at elevated potentials. In this study, the effects of 80 °C/72 h storage on the structural stability and safety of LiCoO 2 (LCO) and LiNi 0.6Mn 0.2Co 0.2O 2 (NMC622) were systematically investigated using operando high-speed X-ray radiography, X-ray diffraction (XRD), X-ray absorption spectroscopy (XAS), and transmission electron microscopy (TEM). The results revealed that untreated NMC622 exhibited severe capacity degradation and ignition risks during overcharging, whereas stored NMC622 showed reduced peak temperatures and maintained structural integrity. TEM analysis identified the formation of an inactive surface layer in stored NMC622, which acted as a protective barrier, suppressing surface reactions and enhancing thermal stability. These findings demonstrate the critical role of thermal treatment in improving the safety and durability of high-Ni cathodes, offering valuable insights into their degradation mechanisms and informing the development of safer, high-performance lithium-ion batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. An overview on the advances of LiCoO2 cathodes for lithium-ion batteries10.1002/aenm.202000982 ↗
2. Challenges in developing electrodes, electrolytes, and diagnostics tools to understand and advance sodium-ion batteries10.1002/aenm.201702403 ↗
3. Anti‐oxygen leaking LiCoO210.1002/adfm.201901110 ↗
4. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
5. Dissolution, migration, and deposition of transition metal ions in Li-ion batteries exemplified by Mn-based cathodes – a critical review10.1039/C7EE03122J ↗
6. High-nickel layered oxide cathodes for lithium-based automotive batteries10.1038/s41560-019-0513-0 ↗
7. A materials perspective on Li-ion batteries at extreme temperatures10.1038/nenergy.2017.108 ↗
8. Coupling of electrochemically triggered thermal and mechanical effects to aggravate failure in a layered cathode10.1038/s41467-018-04862-w ↗
9. Thermal runaway of Lithium-ion batteries employing LiN(SO2F)2-based concentrated electrolytes10.1038/s41467-020-18868-w ↗
10. Before Li ion batteries10.1021/acs.chemrev.8b00422 ↗
11. From materials to cell: state-of-the-art and prospective technologies for lithium-ion battery electrode processing10.1021/acs.chemrev.1c00565 ↗
12. Lithium battery‐powered extreme environments exploring: principle, progress, and perspective10.1002/aenm.202401157 ↗
13. Mathematical models for the performance degradation of lithium-ion batteries with different status of charge (SOC) in long-term high temperature storage10.1149/1945-7111/ac41f0 ↗
14. Effect of ambient storage on the degradation of Ni-rich positive electrode materials (NMC811) for Li-ion batteries10.1149/2.0401802jes ↗
15. Electrochemical and post-mortem degradation analysis of parallel-connected lithium-ion cells with non-uniform temperature distribution10.1149/1945-7111/ac2a7c ↗
16. Unraveling the effect of short-term high-temperature storage on the performance and thermal stability of LiNi0.5Co0.2Mn0.3O2/graphite battery10.1016/j.jpowsour.2020.227842 ↗
17. Unraveling the capacity fading mechanisms of LiNi0.6Co0.2Mn0.2O2 at elevated temperatures10.1016/j.jpowsour.2018.05.029 ↗
18. Comparative studies of zirconium doping and coating on LiNi0.6Co0.2Mn0.2O2 cathode material at elevated temperatures10.1016/j.jpowsour.2018.06.052 ↗
19. Influence of temperature on the aging behavior of 18650-type lithium ion cells: a comprehensive approach combining electrochemical characterization and post-mortem analysis10.1016/j.jpowsour.2016.12.040 ↗
20. Lithium secondary batteries working at very high temperature: capacity fade and understanding of aging mechanisms10.1016/j.jpowsour.2013.02.067 ↗
21. A study of the capacity fade of a LiCoO2/graphite battery during the temperature storage process at 45 degrees C under different SOCs10.1039/D3RA07938D ↗
22. Diagnosing and correcting anode-free cell failure via electrolyte and morphological analysis10.1038/s41560-020-0668-8 ↗
23. Building safe lithium-ion batteries for electric vehicles: a review
24. Bulk fatigue induced by surface reconstruction in layered Ni-rich cathodes for Li-ion batteries10.1038/s41563-020-0767-8 ↗
25. Tuning of thermal stability in layered Li(NixMnyCozO2)10.1021/jacs.6b07771 ↗
26. Identifying and addressing critical challenges of high-voltage layered ternary oxide cathode materials10.1021/acs.chemmater.9b01557 ↗
27. Structural, electrochemical, and thermal properties of nickel-rich LiNixMnyCozO2 materials10.1021/acs.chemmater.8b03827 ↗
28. Promises and challenges of next-generation "beyond Li-ion" batteries for electric vehicles and grid decarbonization10.1021/acs.chemrev.0c00767 ↗
29. Thermally driven interfacial degradation between Li7La3Zr2O12 electrolyte and LiNi0.6Mn0.2Co0.2O2 cathode10.1021/acs.chemmater.0c02261 ↗
30. Surface/interface structure degradation of Ni‐rich layered oxide cathodes toward lithium‐ion batteries: fundamental mechanisms and remedying strategies10.1002/admi.201901749 ↗
31. Probing the mysterious behavior of tungsten as a dopant inside pristine cobalt‐free nickel‐rich cathode materials10.1002/adfm.202211178 ↗
32. Surface and subsurface reactions of lithium transition metal oxide cathode materials: an overview of the fundamental origins and remedying approaches10.1002/aenm.201802057 ↗
33. A review of degradation mechanisms and recent achievements for Ni‐rich cathode‐based Li‐ion batteries10.1002/aenm.202103005 ↗
34. Oxygen release induced chemomechanical breakdown of layered cathode materials10.1021/acs.nanolett.8b01036 ↗
35. Probing battery electrochemistry with in operando synchrotron X-ray imaging techniques10.1002/smtd.201700293 ↗
36. In-operando high-speed tomography of lithium-ion batteries during thermal runaway10.1038/ncomms7924 ↗
37. Theoretical transmissions for X-ray computed tomography studies of lithium-ion battery cathodes
38. Do increased Ni contents in LiNixMnyCozO2 (NMC) electrodes decrease structural and thermal stability of Li ion batteries? A thorough look by consideration of the Li+ extraction ratio10.1021/acsaem.9b01440 ↗
39. In-situ computed tomography of particle microcracking and electrode damage in cycled NMC622/graphite pouch cell batteries10.1149/1945-7111/ac8a22 ↗
40. Probing depth-dependent transition-metal redox of lithium nickel, manganese, and cobalt oxides in Li-ion batteries10.1021/acsami.0c16285 ↗
41. Design strategies of safe electrolytes for preventing thermal runaway in lithium ion batteries10.1021/acs.chemmater.0c02428 ↗
42. Structural changes and thermal stability of charged LiNixMnyCozO2 cathode materials studied by combined in situ time-resolved XRD and mass spectroscopy10.1021/am506712c ↗
43. Role of electronic structure in the susceptibility of metastable transition-metal oxide structures to transformation10.1021/cr020733x ↗
44. Heterogeneous degradation in thick nickel-rich cathodes during high-temperature storage and mitigation of thermal instability by regulating cationic disordering