journal article·2025-02

High-throughput computational screening of dopants for improved structural stability in overlithiated layered oxide cathodes

Seungpyo Kang, Jinyoung Jeong, Taehyun Park, Woon-Hong Yeo, Kwangjin Park, Kyoungmin Min

Publisher page

Abstract

Overlithiated layered oxides (OLOs) that achieve high specific capacity (>250 mAh/g) owing to additional anionic redox are promising cathode materials for lithium rechargeable batteries. However, the anionic redox at high voltages leads to structural degradation of OLO with transition metal (TM) migration and oxygen loss. Such structural instability leads to voltage and capacity fading, which impedes the commercial use of OLO. In this study, first-principles-based high-throughput computational screening is performed to identify promising dopants to improve the structural stability of OLO. Li 1.15Ni 0.19Co 0.11Mn 0.56O 2 is constructed as a pristine structure to evaluate the performances of the 36 dopants. Several criteria, including thermodynamic stability, TM–O bond length, interlayer spacing, volumetric shrinkage, oxygen stability, dopant inertness, and specific energy, are considered in the discharged and charged states. Among the considered dopant candidates, two (Si and Ga) fulfill all the criteria; hence, they are believed to improve the structural stability of the OLO cathode. The current analysis provides comprehensive guidelines for the synthesis of doped OLO while satisfying long-term cyclability and high-energy requirements.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Semiconductor materials and devices · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. High-capacity oxide cathode beyond 300 MAh/g10.1021/acsenergylett.3c00563 ↗
2. Building practical high-voltage cathode materials for lithium-ion batteries
3. The future cost of electrical energy storage based on experience rates10.1038/nenergy.2017.110 ↗
4. Batteries and fuel cells for emerging electric vehicle markets10.1038/s41560-018-0108-1 ↗
5. Review—Li-Rich layered oxide cathodes for next-generation Li-ion batteries: chances and challenges10.1149/2.0111514jes ↗
6. Towards high-energy-density lithium-ion batteries: strategies for developing high-capacity lithium-rich cathode materials10.1016/j.ensm.2020.11.008 ↗
7. Cationic and anionic redox in lithium-ion based batteries10.1039/C8CS00426A ↗
8. Fundamental understanding and practical challenges of anionic redox activity in Li-ion batteries10.1038/s41560-018-0097-0 ↗
9. Nickel-rich and lithium-rich layered oxide cathodes: progress and perspectives10.1002/aenm.201501010 ↗
10. Challenges and recent advances in high capacity Li-rich cathode materials for high energy density lithium-ion batteries
11. Voltage decay of Li-rich layered oxides: mechanism, modification strategies, and perspectives
12. Li-rich layered oxides: structure, capacity and voltage fading mechanisms and solving strategies10.1016/j.partic.2021.05.011 ↗
13. Origin of structural degradation in Li-rich layered oxide cathode10.1038/s41586-022-04689-y ↗
14. Voltage decay in layered Li-rich Mn-based cathode materials10.1007/s41918-019-00049-z ↗
15. Evolution of redox couples in Li- and Mn-rich cathode materials and mitigation of voltage fade by reducing oxygen release10.1038/s41560-018-0207-z ↗
16. Oxygen release degradation in Li-ion battery cathode materials: mechanisms and mitigating approaches10.1002/aenm.201900551 ↗
17. Thermal runaway caused fire and explosion of lithium ion battery10.1016/j.jpowsour.2012.02.038 ↗
18. Insight of a phase compatible surface coating for long-durable Li-rich layered oxide cathode10.1002/aenm.201901795 ↗
19. Effect of Li3PO4 coating of layered lithium-rich oxide on electrochemical performance10.1016/j.jpowsour.2016.11.020 ↗
20. Suppressing surface lattice oxygen release of Li-rich cathode materials via heterostructured spinel Li4Mn5O12 coating10.1002/adma.201801751 ↗
21. Enhanced cathode performance: mixed Al2O3and LiAlO2Coating of Li1.2Ni0.13Co0.13Mn0.54O210.1021/acsami.0c10459 ↗
22. Synthesis and electrochemical characterization of Mg-doped Li-rich Mn-based cathode material10.1016/j.ceramint.2016.02.128 ↗
23. Electrochemical performance of the Li-rich layered Li1.2Mn0.54Ni0.13Co0.13O2 cathode material influenced by Fe3+ doping10.1016/j.jallcom.2022.164862 ↗
24. Modulating the local electronic structure via Al substitution to enhance the electrochemical performance of Li-rich Mn-based cathode materials10.1016/j.jallcom.2023.169481 ↗
25. Tuning the electronic structure of the metal-oxygen group by silicon substitution in lithium-rich manganese-based oxides for superior performance10.1021/acs.jpcc.6b04338 ↗
26. Effect of Cu doping on the structural and electrochemical properties of lithium-rich Li1.25Mn0.50Ni0.125Co0.125O2 nanopowders as a cathode material10.1016/j.ceramint.2018.10.122 ↗
27. Improved cycle performance of Li[Li0.2Mn0.54Co0.13Ni0.13]O2 by Ga doping for lithium ion battery cathode material10.1016/j.ssi.2017.01.008 ↗
28. Stabilizing cobalt-free Li-rich layered oxide cathodes through oxygen lattice regulation by two-phase Ru doping10.1002/anie.202213806 ↗
29. Influence of Ru substitution on Li-rich 0.55Li 2MnO 3·0.45LiNi 1/3Co 1/3Mn 1/3O 2 cathode for Li-ion batteries10.1016/j.electacta.2012.06.118 ↗
30. The effects of trace Yb doping on the electrochemical performance of Li-rich layered oxides10.1002/cssc.201900226 ↗
31. Density functional theory guidance on rare earth doping—inhibition of lattice oxygen evolution in lithium-rich layered manganese oxide materials10.1016/j.jallcom.2021.163311 ↗
32. Structurally robust lithium-rich layered oxides for high-energy and long-lasting cathodes10.1038/s41467-024-45490-x ↗
33. Voltage decay and redox asymmetry mitigation by reversible cation migration in lithium-rich layered oxide electrodes10.1038/s41563-019-0572-4 ↗
34. Mitigating voltage decay of Li-rich cathode material via increasing Ni content for lithium-ion batteries10.1021/acsami.6b06733 ↗
35. Suppression of voltage decay through manganese deactivation and nickel redox buffering in high-energy layered lithium-rich electrodes10.1002/aenm.201800606 ↗
36. Maximizing the energy density and stability of Ni-rich layered cathode materials with multivalent dopants via machine learning
37. Transition metal-doped Ni-rich layered cathode materials for durable Li-ion batteries10.1038/s41467-021-26815-6 ↗
38. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
39. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
40. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
41. First-principles prediction of redox potentials in transition-metal compounds with $\mathrm{LDA}+U10.1103/PhysRevB.70.235121 ↗
42. Linear response approach to the calculation of the effective interaction parameters in the $\mathrm{LDA}+\mathrm{U}$ method10.1103/PhysRevB.71.035105 ↗
43. Oxidation energies of transition metal oxides within the $\mathrm{GGA}+\mathrm{U}$ framework10.1103/PhysRevB.73.195107 ↗
44. Formation enthalpies by mixing GGA and GGA $+$ $U$ calculations10.1103/PhysRevB.84.045115 ↗
45. Enthalpy of formation of LiNiO2, LiCoO2 and their solid solution, LiNi1−xCoxO210.1016/j.ssi.2003.11.004 ↗
46. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu10.1063/1.3382344 ↗
47. A fast and robust algorithm for bader decomposition of charge density10.1016/j.commatsci.2005.04.010 ↗
48. A first-principles study of the preventive effects of Al and Mg doping on the degradation in LiNi0.8Co0.1Mn0.1O2 cathode materials10.1039/C6CP06270A ↗
49. Computational screening of dopants for mitigating degradation behaviors in sodium-ion layered oxide cathode material10.1016/j.jallcom.2020.157785 ↗
50. Capacity fading and inter/intra-granular fracture of polycrystalline cathode particle induced by charge/discharge cycles: a numerical study
51. High-voltage charging-induced strain, heterogeneity, and micro-cracks in secondary particles of a nickel-rich layered cathode material10.1002/adfm.201900247 ↗
52. A comparative study of structural changes in lithium nickel cobalt manganese oxide as a function of Ni content during delithiation process10.1016/j.jpowsour.2016.03.017 ↗
53. Suppressing voltage decay of a lithium-rich cathode material by surface enrichment with atomic ruthenium10.1021/acsami.8b06271 ↗
54. Improving the electrochemical performances of Li-rich Li1.2Ni0.13Co0.13Mn0.54O2 through cooperative doping of Na+ and Mg2+10.1016/j.electacta.2022.140169 ↗