journal article·2024-09

(Bi2O3)0.705(Er2O3)0.245(WO3)0.05–Co3O4: A new oxygen electrode material with high oxygen reduction and evolution reaction catalytic activity for low-temperature solid oxide electrochemical cells

Jing-Hui Zhang, Jia-Jie Tang, Cheng-Xin Li, Shan-Lin Zhang

Publisher page

Abstract

The rapid increase in oxygen electrode polarization at reduced operating temperatures is a critical factor limiting the performance of low-temperature solid oxide electrochemical cells (LT-SOCs). To address this issue, a novel composite oxygen electrode material composed of (Bi 2O 3) 0.705(Er 2O 3) 0.245(WO 3) 0.05 (EWSB) and Co 3O 4 is developed. This composite utilizes the high oxygen ion conductivity of EWSB and the robust catalytic activity of Co 3O 4. Compared to conventional composite or mixed ionic–electronic conducting electrodes, this EWSB–Co 3O 4 electrode enhances the density of active sites by increasing the electrode thickness, significantly improving the catalytic activities for both oxygen evolution and reduction reactions. Results indicate that electrode polarization decreases markedly with an increase in electrode thickness. At a thickness of 60 μm, the electrode exhibits the lowest polarization, reaching as low as 0.08 Ω cm 2 at 600 °C. Furthermore, the EWSB–Co 3O 4 electrode maintains stable performance in both fuel cell and electrolysis modes. It also demonstrates excellent CO 2 tolerance; even at 20 % CO 2 concentration, the electrode polarization impedance does not increase significantly and fully recovers to its initial value once the CO 2 is removed.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Catalysis and Oxidation Reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Solid oxide fuel cell (SOFC) performance evaluation, fault diagnosis and health control: a review10.1016/j.jpowsour.2021.230058 ↗
2. Functional ceria-based nanocomposites for advanced low temperature (300–600 °C) solid oxide fuel cell: a comprehensive review, Mater
3. High performance and carbon-deposition resistance metal-supported solid oxide fuel cell with a nickel–manganese spinel modified anode
4. Recent advances in high temperature electrolysis using solid oxide fuel cells: a review10.1016/j.jpowsour.2011.12.019 ↗
5. A review of high temperature co-electrolysis of H2O and CO2 to produce sustainable fuels using solid oxide electrolysis cells (SOECs): advanced materials and technology10.1039/C6CS00403B ↗
6. Efficient water splitting through solid oxide electrolysis cells with a new hydrogen electrode derived from A-site cation-deficient La0.4Sr0.55Co0.2Fe0.6Nb0.2O3-δ perovskite, Mater
7. Lowering the temperature of solid oxide fuel cells10.1126/science.1204090 ↗
8. Materials for lower temperature solid oxide fuel cells
9. Review and analysis of characterization methods and ionic conductivities for low-temperature solid oxide fuel cells (LT-SOFC)10.1016/j.jpowsour.2014.04.008 ↗
10. Synthesis and characterization of nanocrystalline ScSZ electrolyte for SOFCs10.1016/j.ijhydene.2011.02.139 ↗
11. Sammes · 2006 · vol. 202 · 19
12. Oxide-ion and proton conducting electrolyte materials for clean energy applications: structural and mechanistic features10.1039/b915141a ↗
13. Improved solid oxide fuel cell performance with nanostructured electrolytes10.1021/nn201354p ↗
14. Appraisal of Ce1-yGdyO2-y/2 electrolytes for IT-SOFC operation at 500°C10.1016/S0167-2738(99)00319-7 ↗
15. Investigation of LSM-8YSZ cathode within an all ceramic SOFC. Part I: chemical interactions10.1016/j.jeurceramsoc.2020.02.004 ↗
16. Investigation of LSM/8YSZ cathode within an all-ceramic SOFC, Part II: optimization of performance and cosinterability10.1016/j.jeurceramsoc.2020.03.010 ↗
17. An improved oxygen reduction reaction activity and CO2-tolerance of La0.6Sr0.4Co0.2Fe0.8O3-δ achieved by a surface modification with barium cobaltite coatings10.1016/j.jpowsour.2021.230573 ↗
18. Flexible A-site doping La0.6−xMxSr0.4Co0.2Fe0.8O3 (M=Ca, Ba, Bi; x=0, 0.1, 0.2) as novel cathode material for intermediate-temperature solid oxide fuel cells: a first-principles study and experimental exploration10.1016/j.jpowsour.2021.229564 ↗
19. La0.6Sr0.4Co0.2Fe0.8O3-δ nanofiber cathode for intermediate-temperature solid oxide fuel cells by water-based sol-gel electrospinning: synthesis and electrochemical behaviour10.1016/j.jeurceramsoc.2018.01.034 ↗
20. Degradation of nano-scale cathodes: a new paradigm for selecting low-temperature solid oxide cell materials10.1039/C6CP02590K ↗
21. Characterization and comparison of different cathode materials for SC-SOFC: LSM, BSCF, SSC, and LSCF10.1002/fuce.201100064 ↗
22. Yttrium doping of Ba0.5Sr0.5Co0.8Fe0.2O3-δ part I: influence on oxygen permeation, electrical properties, reductive stability, and lattice parameters10.1016/j.jeurceramsoc.2017.12.045 ↗
23. Characterisation of microstructure and hardness of perovskite-structured Ba0.5Sr0.5Co0.8Fe0.2O3-δ under different sintering conditions10.1016/j.jeurceramsoc.2016.02.010 ↗
24. Robust tantalum tuned perovskite oxygen electrode for reversible protonic ceramic electrochemical cells10.1007/s12598-024-02691-z ↗
25. Review on Fe-based double perovskite cathode materials for solid oxide fuel cells10.20517/energymater.2023.70 ↗
26. A high-performance cathode for the next generation of solid-oxide fuel cells10.1038/nature02863 ↗
27. Bismuth based oxide electrolytes— structure and ionic conductivity10.1016/S0955-2219(99)00009-6 ↗
28. Stabilized δ-Bi2O3 phase in the system Bi2O3-Er2O3-WO3 and its oxide-ion conduction10.1016/j.ssi.2005.02.027 ↗
29. Effect of Co3O4 and Co3O4/CeO2 infiltration on the catalytic and electro-catalytic activity of LSM15/CGO10 porous cells stacks for oxidation of propene10.1016/j.electacta.2015.01.158 ↗
30. A low crystallinity oxygen-vacancy-rich Co3O4 cathode for high-performance flexible asymmetric supercapacitors10.1039/C8TA06349D ↗
31. High stability SrTi1-xFexO3-δ electrodes for oxygen reduction and oxygen evolution reactions10.1039/C9TA07548H ↗
32. Fluorite-doped Gd0.1Ce0.9O1.95 polycrystalline electrolytes with extraordinarily enhanced oxide ionic conductivities controlled by depletion degree of oxygen vacancies at grain boundaries10.1016/j.jpowsour.2020.229118 ↗
33. Plasma-sprayed (Bi2O3)0.705(Er2O3)0.245(WO3)0.05 electrolyte for intermediate-temperature solid oxide fuel cells (IT-SOFCs)10.1007/s11666-021-01314-8 ↗
34. Nano-structured LSM-YSZ refined with PdO/ZrO2 oxygen electrode for intermediate temperature reversible solid oxide cells10.1016/j.ijhydene.2020.05.116 ↗
35. Degradation mechanisms of porous La0.6Sr0.4Co0.2Fe0.8O3-δ solid oxide fuel cell cathodes10.1149/2.1211807jes ↗
36. Electrochemical performance and stability of SrTi0.3Fe0.6Co0.1O3-δ infiltrated La0.8Sr0.2MnO3–Zr0.92Y0.16O2-δ oxygen electrodes for intermediate-temperature solid oxide electrochemical cells10.1016/j.jpowsour.2019.04.044 ↗
37. Development of ScSZ electrolyte by very low pressure plasma spraying for high-performance metal-supported SOFCs10.1007/s11666-019-00970-1 ↗
38. Determination of the nature of the co-doping effect on the structure, mechanical properties and ionic conductivity of SOFC electrolyte based on YSZ10.1016/j.ssi.2024.116581 ↗