journal article·2023-10Open access

Fast formation of thin TiOx layer on titanium surface enabling a broadband light capture and fast charge carrier transfer

Xuelan Hou, Hang Zhang, Ramesh Raju, Yongdan Li, Peter D. Lund

Abstract

Improving light absorption and conversion ability is essential to improving the performance of photoelectrochemical (PEC) cells in converting and storing solar radiation into chemical energy. As part of this, realizing broadband light absorption in the wavelength of 250–2500 nm is promising to improve solar energy utilization. Previous studies have typically relied on noble metal functional materials to realize visible light harvesting over broadband light capture in PEC water splitting (WS) cells. Here, we report an electrochemical oxidation method to prepare thin TiOx layer on a Ti-foil surface. A nanostructured film is formed within 10–60 s with a tunable absorption range between 250 and 2500 nm, going beyond the 420 nm absorption edge of TiO2. In addition to superior light capture ability, the film shows a 10-fold enhancement in the charge carrier transfer rate under AM 1.5 G light compared to that measured under dark conditions. The method proposed is simple, fast, and low-cost, and it has potential for large-area PEC cells with promoted charge carriers’ transfer.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Photocatalysis Techniques · Perovskite Materials and Applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Optimal design and performance assessment for a solar powered electricity, heating and hydrogen integrated energy system10.1016/j.energy.2022.125453 ↗
2. 2022
3. Nitrogen-doped titanium dioxide as visible-light-sensitive photocatalyst: designs, developments, and prospects10.1021/cr5000738 ↗
4. Core-shell structured titanium dioxide nanomaterials for solar energy utilization10.1039/C8CS00443A ↗
5. Light management in photoelectrochemical water splitting – from materials to device engineering10.1039/D0TC06071B ↗
6. Increasing solar absorption for photocatalysis with black hydrogenated titanium dioxide nanocrystals10.1126/science.1200448 ↗
7. Ti3+ self-doped TiO2 nanotubes photoelectrode decorated with Ar-Fe2O3 derived from MIL-100(Fe): enhanced photo-electrocatalytic performance for antibiotic degradation10.1016/j.apcatb.2022.121344 ↗
8. Cutaneous effects of infrared radiation: from clinical observations to molecular response mechanisms10.1034/j.1600-0781.2003.00054.x ↗
9. Infrared and skin: friend or foe10.1016/j.jphotobiol.2015.12.014 ↗
10. Solar steam generation on scalable ultrathin thermoplasmonic TiN nanocavity arrays10.1016/j.nanoen.2021.105828 ↗
11. Broadband solar absorption by chromium metasurface for highly efficient solar thermophotovoltaic systems10.1016/j.rser.2022.113005 ↗
12. Metallic nanoparticle-on-mirror: multiple-band light harvesting and efficient photocurrent generation under visible light irradiation10.1016/j.nanoen.2021.106609 ↗
13. Au/TiO2 2D‐photonic crystals as UV–Visible photocatalysts for H2 Production
14. Plasmon-enhanced photoelectrochemical watersplitting for efficient renewable energy storage
15. Three-dimensional plasmonic Ag/TiO2 nanocomposite architectures on flexible substrates for visible-light photocatalytic activity10.1038/s41598-017-09401-z ↗
16. Nanoporous titanium (oxy)nitride films as broadband solar absorbers10.1021/acsami.2c01185 ↗
17. Recent advances in TiO2-functionalized textile surfaces
18. Self-cleaning, broadband and quasi-omnidirectional antireflective structures based on mesocrystalline rutile TiO2 nanorod arrays10.1039/c2ee03573a ↗
19. Recent progress in antireflection and self-cleaning technology – from surface engineering to functional surfaces10.1016/j.pmatsci.2013.12.003 ↗
20. Wireless photoelectrochemical water splitting using triple-junction solar cell protected by TiO2
21. Reduced TiO2 nanotube array as an excellent cathode for hydrogen evolution reaction in alkaline solution10.1016/j.cattod.2021.12.009 ↗
22. Porous Ag/TiO2-Schottky-diode based plasmonic hot-electron photodetector with high detectivity and fast response10.1515/nanoph-2019-0094 ↗
23. Hot electrons generated by intraband and interband transition detected using a plasmonic Cu/TiO2 nanodiode10.1039/C9RA02601K ↗
24. Broadband near-infrared metamaterial absorbers utilizing highly lossy metals10.1038/srep39445 ↗
25. Au nanoparticles decorated ZnO nanoarrays with enhanced electron field emission and optical absorption properties10.1016/j.matlet.2015.01.104 ↗
26. Origin of work function engineering of silver oxide for an In–Ga–Zn–O Schottky diode10.1016/j.apsusc.2019.144519 ↗
27. Direct observation of the work function evolution of graphene-two-dimensional metal contacts10.1039/C4TC01613K ↗
28. Defect state-induced efficient hot electron transfer in Au nanoparticles/reduced TiO2 mesocrystal photocatalysts10.1039/C8CC02853B ↗
29. Effect of Ti foil size on the micro sizes of anodic TiO2 nanotube array and photoelectrochemical water splitting performance10.1016/j.cej.2021.131415 ↗
30. Controlling anodization time to monitor film thickness, phase composition and crystal orientation during anodic growth of TiO2 nanotubes10.1016/j.elecom.2021.107168 ↗
31. Antireflective self-cleaning TiO2 coatings for solar energy harvesting applications10.3389/fmats.2021.687059 ↗
32. Photo-assisted electrodeposition of cobalt–phosphate (Co–Pi) catalyst on hematite photoanodes for solar water oxidation10.1039/c1ee01034d ↗
33. Ambipolar conjugated polymers with ultrahigh balanced hole and electron mobility for printed organic complementary logic via a two-step CH activation strategy10.1002/adma.201806010 ↗
34. Exploiting the photonic crystal properties of TiO2 nanotube arrays to enhance photocatalytic hydrogen production10.1021/acscatal.5b02817 ↗
35. Light management with patterned micro‐ and nanostructure arrays for photocatalysis, photovoltaics, and optoelectronic and optical devices
36. Photo-induced properties of anodic oxide films on Ti6Al4V10.1016/j.tsf.2012.03.026 ↗
37. Surface modification of titanium, titanium alloys, and related materials for biomedical applications10.1016/j.mser.2004.11.001 ↗
38. Holey substrate-directed strain patterning in bilayer MoS210.1021/acsnano.1c08348 ↗
39. Appropriate Use of electrochemical impedance spectroscopy in water splitting electrocatalysis10.1002/celc.202000515 ↗
40. Electrochemical impedance spectroscopy: an overview of bioanalytical applications10.1039/c3ay26476a ↗
41. Electrochemical impedance spectroscopy of metal oxide electrodes for energy Applications10.1021/acsaem.9b01965 ↗
42. Grey hematite photoanodes decrease the onset potential in photoelectrochemical water oxidation10.1016/j.scib.2021.02.016 ↗
43. A ternary nanostructured α-Fe2O3/Au/TiO2 photoanode with reconstructed interfaces for efficient photoelectrocatalytic water splitting10.1016/j.apcatb.2019.118206 ↗
44. An in situ combustion method for scale-up fabrication of BiVO4 photoanodes with enhanced long-term photostability for unassisted solar water splitting10.1039/D0TA03557B ↗
45. New iron-cobalt oxide catalysts promoting BiVO4 films for photoelectrochemical water splitting
46. In situ formation of oxygen vacancies achieving near‐complete charge separation in planar BiVO4 photoanodes
47. Mie resonance in hollow nanoshells of ternary TiO2-Au-CdS and enhanced photocatalytic hydrogen evolution10.1016/j.apcatb.2020.119153 ↗
48. Plasmonic near-touching titanium oxide nanoparticles to realize solar energy harvesting and effective local heating10.1039/C6NR01295G ↗
49. Plasmonic nanostructures for broadband solar absorption based on the intrinsic absorption of metals10.1016/j.solmat.2018.09.003 ↗
50. Dental implant systems10.3390/ijms11041580 ↗