journal article·2022-10

Plasma treatment for enhanced microbe-electrode interfaces: A bio-electronic sink

Roshan Nemade, Sheldon Cotts, Vikas Berry

Publisher page

Abstract

All microbial electrochemical technologies require energetically and kinetically favorable interfacing between the active bio-membrane and the electron accepting (or donating) electrode. Anodic-type electrogenic bacteria efficiently discharge electrons by metabolically oxidizing substrates as they respire on an accepting surface. However, after electron production, the surface chemistry of the anode governs the efficiency of harvesting the cyto-metabolic electrons via the microbe-electrode interaction. Plasma functionalization is a versatile route to form uniform chemical groups rapidly on surfaces for enhanced connectivity with the biocomponents of the cell-membrane. Here, we outline the mechanism of surface plasma treatment and the resulting effect on the bio-interface. With a highly reactive radical chemistry, the plasma induced surface functionalization can improve the cell membrane adherence directly increasing the interfacial network for enhancing the electrochemical performance in bio-electrical devices.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microbial Fuel Cells and Bioremediation · Electrochemical sensors and biosensors · Analytical Chemistry and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (90)

Show source-provided references
1. Microbial fuel cells : from fundamentals to applications . A review10.1016/j.jpowsour.2017.03.109 ↗
2. Bioelectrochemistry of microbial fuel cells and their potential applications in bioenergy
3. Electricity production by geobacter sulfurreducens attached to electrodes10.1128/AEM.69.3.1548-1555.2003 ↗
4. Microbial fuel cells: methodology and technology10.1021/es0605016 ↗
5. Recent developments in microbial fuel cell technologies for sustainable bioenergy10.1263/jbb.106.528 ↗
6. A review of design, operational conditions and applications of microbial fuel cells10.1080/17597269.2017.1302682 ↗
7. An overview of electrode materials in microbial fuel cells10.1016/j.jpowsour.2011.01.012 ↗
8. Biogas production: current state and perspectives10.1007/s00253-009-2246-7 ↗
9. Influence of environmental conditions on methanogenic compositions in anaerobic biogas reactors10.1128/AEM.71.1.331-338.2005 ↗
10. The roles of acetotrophic and hydrogenotrophic methanogens during anaerobic conversion of biomass to methane: a review
11. Increased performance of single-chamber microbial fuel cells using an improved cathode structure10.1016/j.elecom.2006.01.010 ↗
12. Energetically autonomous robots
13. Recent advances in microbial fuel cells (MFCs) and microbial electrolysis cells (MECs) for wastewater treatment, bioenergy and bioproducts10.1002/jctb.4004 ↗
14. Power generation and organics removal from wastewater using activated carbon nanofiber (ACNF) microbial fuel cells (MFCs)10.1016/j.ijhydene.2012.11.005 ↗
15. Cellular nano-transistor: an electronic-interface between nanoscale semiconductors and biological cells
16. Interface of electrogenic bacteria and reduced graphene oxide: energetics and electron transport10.1021/acsaelm.0c00057 ↗
17. Plasma treatment of electrodes significantly enhances the development of anodic electrochemically active biofilms10.1016/j.electacta.2013.06.145 ↗
18. Electro-microbiology as a promising approach towards renewable energy and environmental sustainability10.3390/en11071822 ↗
19. Graphene/carbon cloth anode for high-performance mediatorless microbial fuel cells10.1016/j.biortech.2012.02.116 ↗
20. Pinto · 2017
21. Metalloproteins containing cytochrome, iron-sulfur, or copper redox centers10.1021/cr400479b ↗
22. Spatially resolved chemical analysis of geobacter sulfurreducens cell surface10.1021/acsnano.9b02032 ↗
23. Bacteria/material interfaces: role of the material and cell wall properties
24. The ins and outs of microorganism-electrode electron transfer reactions10.1038/s41570-017-0024 ↗
25. Improving cell affinity of poly (D,L-lactide) film modified by anhydrous ammonia plasma treatment10.1002/pat.177 ↗
26. Improving the cell affinity of a poly(D,L-lactide) film modified by grafting collagen via a plasma technique10.1088/1748-6041/1/4/011 ↗
27. Diffusion of macrolide antibiotics through the outer membrane of Moraxella catarrhalis10.1007/s101560050034 ↗
28. Bio-electrochemical frameworks governing microbial fuel cell performance: technical bottlenecks and proposed solutions10.1039/D1RA08487A ↗
29. On the use of cyclic voltammetry for the study of anodic electron transfer in microbial fuel cells10.1039/b802363h ↗
30. Exoelectrogens in microbial fuel cells toward bioelectricity generation: a review10.1002/er.3305 ↗
31. A basic introduction into microbial fuel cells and microbial electrocatalysis10.1007/s40828-018-0072-1 ↗
32. Bacterial attachment to oxygen-functionalized graphenic surfaces10.1016/j.msec.2020.110972 ↗
33. Fabrication of highly conductive graphene/ITO transparent bi-film through CVD and organic additives-free sol-gel techniques10.1038/s41598-017-18063-w ↗
34. Quantitatively predicting bacterial adhesion using surface free energy determined with a spectrophotometric method10.1021/es5050425 ↗
35. Correlation between Cells-on-Chips materials and cell adhesion/proliferation focused on material's surface free energy10.1016/j.colsurfa.2018.12.059 ↗
36. The role of surface free energy in osteoblast-biomaterial interactions10.1179/1743280414Y.0000000038 ↗
37. Performance improvement of microbial fuel cell (MFC) using suitable electrode and Bioengineered organisms: a review10.1080/21655979.2016.1267883 ↗
38. Nanostructured polyaniline/titanium fuel cells10.1021/nn700102s ↗
39. Microscopic analysis of plasma-activated polymeric materials10.1016/B978-0-12-813152-7.00011-1 ↗
40. Plasma methods for the generation of chemically reactive surfaces for biomolecule immobilization and cell colonization - a review10.1002/ppap.200600021 ↗
41. Plasma-surface modification of biomaterials10.1016/S0927-796X(02)00004-9 ↗
42. An Introduction to Plasma Polymerization
43. Dilsiz · 2012 · 37
44. Nonthermal plasma technology as a versatile strategy for polymeric biomaterials surface modification: a review10.1021/bm900186s ↗
45. Polymer surface modification by plasmas and photons10.1016/0167-5729(96)80003-3 ↗
46. XPS investigation of the reaction of carbon with NO, O2, N2 and H2O plasmas10.1016/j.carbon.2006.07.021 ↗
47. Carbon materials modified by plasma treatment as electrodes for supercapacitors10.1016/j.jpowsour.2009.12.019 ↗
48. Improved fuel cell and electrode designs for producing electricity from microbial degradation10.1002/bit.10501 ↗
49. High power density from a miniature microbial fuel cell using Shewanella oneidensis DSP1010.1021/es052254w ↗
50. Continuous electricity generation at high voltages and currents using stacked microbial fuel cells10.1021/es0525511 ↗
51. Wen · 2006 · 3166
52. Adhesion of carbon fibers to amine hardened epoxy resin: influence of ammonia plasma functionalization of carbon fibers10.1016/j.apsusc.2018.05.057 ↗
53. Argon plasma treatment of glass surfaces10.1007/BF01139063 ↗
54. Conference Series OPEN ACCESS to cite this article: J Ubrig et al
55. Majee · 2013
56. Materials Characterization of a carbon felt electrode: structural and physical properties10.1039/a805823g ↗
57. Towards enhanced performance thin-film composite membranes via surface plasma modification10.1038/srep29206 ↗
58. Degradation behavior of thin polystyrene films on exposure to Ar plasma and its emitted radiation10.1080/01694243.2012.705528 ↗
59. Argon plasma improves the tissue integration and angiogenesis of subcutaneous implants by modifying surface chemistry and topography10.2147/IJN.S167637 ↗
60. Schonhom · 1966 · vol. 4 · 203
61. Surface treatment of polymers for adhesive bonding10.1002/app.1967.070110809 ↗
62. Improvement of performances of PET track membranes by plasma treatment10.1016/S0014-3057(01)00130-6 ↗
63. Argon plasma-induced modifications at the surface of polycarbonate thin films10.1016/S0169-4332(97)00501-1 ↗
64. Surface characterization of plasma deposited organic thin films10.1016/0368-2048(95)02666-5 ↗
65. Modification of the surface properties of a polypropylene (PP) film using an air dielectric barrier discharge plasma10.1016/S0169-4332(01)01035-2 ↗
66. Enzymatic fuel cells: integrating flow-through anode and air-breathing cathode into a membrane-less biofuel cell design10.1016/j.bios.2011.06.029 ↗
67. Designing highly efficient enzyme-based carbonaceous foams electrodes for biofuel cells10.1039/c003488f ↗
68. Study on atmospheric air glow discharge plasma generation and surface modification of carbon fiber fabric
69. Modification of polyethylene terephthalate (PET) films surface with gradient roughness and homogenous surface chemistry by dielectric barrier discharge plasma10.1016/j.cplett.2017.10.009 ↗
70. Adsorption of lead(II) on O2-plasma-oxidized multiwalled carbon nanotubes: thermodynamics, kinetics, and desorption10.1021/am2004202 ↗
71. Plasma-Assisted surface modification on the electrode interface for flexible fiber-shaped Zn-polyaniline batteries10.1021/acsami.9b19172 ↗
72. SEM and XPS characterization of PAN-based carbon fibres etched in oxygen plasmas10.1007/BF01159843 ↗
73. Nitrogen plasma-based ion implantation of poly(tetrafluoroethylene): effect of the main parameters on the surface properties10.1016/j.apsusc.2010.04.021 ↗
74. X-Ray photoemission study of plasma modified polyethylene surfaces10.1163/156856187X00319 ↗
75. Enhanced electricity production from microbial fuel cells with plasma-modified carbon paper anode10.1039/c2cp40873b ↗
76. Current trends in biomaterial surface functionalization - nitrogen-containing plasma assisted processes with enhanced selectivity
77. Ammonia plasma treatment of polystyrene surfaces enhances proliferation of primary human mesenchymal stem cells and human endothelial cells10.1002/biot.201200210 ↗
78. Coating of titanium implants with collagen, RGD peptide and chondroitin sulfate10.1016/j.biomaterials.2006.06.034 ↗
79. The enhanced attachment and growth of endothelial cells on anhydrous ammonia gaseous plasma modified surfaces of polystyrene and poly(tetrafluoroethylene)10.3109/10731199009117319 ↗
80. Plasma-modified nylon meshes as supports for cell culturing10.3109/10731199709117452 ↗
81. The effect of low power plasmas on carbon fibre surfaces10.1016/0008-6223(90)90046-2 ↗
82. Effect of ammonia plasma treatment on the properties and cytocompatibility of a poly(L-lactic acid) film surface10.1163/092050611X560690 ↗
83. Plasma-induced surface punctionalization of polymeric biomaterials in ammonia plasma10.1002/1521-3986(200111)41:6<562::AID-CTPP562>3.0.CO;2-Y ↗
84. Ammonia plasma functionalized polycarbonate surfaces improve cell migration inside an artificial 3D cell culture module10.1002/ppap.201100059 ↗
85. Ammonia treatment of carbon cloth anodes to enhance power generation of microbial fuel cells10.1016/j.elecom.2006.10.023 ↗
86. Microbial fuel cells: advances in electrode modifications for improvement of system performance10.1080/15435075.2017.1326049 ↗
87. Treatment of carbon fiber brush anodes for improving power generation in air–cathode microbial fuel cells10.1016/j.jpowsour.2009.10.030 ↗
88. Carbon nanotube/polyaniline composite as anode material for microbial fuel cells10.1016/j.jpowsour.2007.03.048 ↗
89. Poly (3,4-ethylenedioxythiophene) promotes direct electron transfer at the interface between Shewanella loihica and the anode in a microbial fuel cell10.1016/j.jpowsour.2014.11.129 ↗
90. Rismani-yazdi · 2008 · vol. 180 · 683