Improved suitability as catalyst support and more efficient charge carrier separation of native air-formed TiO2 films by mild laser treatment
Source abstract
Abstract
Abstract The possibility of using native air-formed TiO2 films (N–TiO2) as substrate for platinum deposition and the extent to which the effectiveness of such Pt/TiO2 systems can be improved by a mild laser treatment of the TiO2 support was investigated. Laser-treated titania (LT-TiO2) exhibited homogeneous rough surface and allowed much efficient separation of photogenerated charge carriers. Both N–TiO2 and LT-TiO2 were used as substrates for platinum electrochemical deposition and it was found that the use of the latter enables more uniform distribution and much lower average size of the Pt particles, leading to an enhancement of the electrochemically active specific surface area of ca. 75%. Moreover, the use of a laser-treated titania substrate not only facilitates methanol anodic oxidation overall process but also improves the resistance of the electrocatalyst to deactivation by strong adsorption of intermediates. Upon UV irradiation, Pt/LT-TiO2 electrodes exhibit a strong enhancement of the methanol oxidation current and, importantly, a much better resistance to poisoning.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (78)
Show source-provided references
1. The low potential oxidation of methanol at a platinised platinum anode, Suomalaisen Tiedeakatemian toimituksia A2: Chemica
2. Kordesch · 1996
3. Gasteiger · 2008 · 3084
4. Precious metal free Ni/Cu/Mo trimetallic nanocomposite supported on multi-walled carbon nanotubes as highly efficient and durable anode-catalyst for alkaline direct methanol fuel cells10.1016/j.jelechem.2018.05.035 ↗
5. Platinum, electrodeposition on conductive diamond powder and its application to methanol oxidation in acidic media10.1149/1.2830857 ↗
6. Just a dream–or future reality?10.1126/science.1172083 ↗
7. Electrodeposition of platinum on polytyramine-modified electrodes for electrocatalytic applications10.1016/j.electacta.2008.12.050 ↗
8. Electrochemical preparation and characterization of a cobalt oxide-platinum composite with promising capacitive and electrocatalytic features10.1007/s10008-012-1836-y ↗
9. Influence of cobalt oxide substrate on the resistance to fouling during methanol oxidation of platinum particles10.1016/j.elecom.2012.12.027 ↗
10. The priority and challenge of high-power performance of low-platinum proton-exchange membrane fuel cells10.1021/acs.jpclett.6b00216 ↗
11. Functional effects of the deposition substrate on the electrochemical behavior of platinum particles10.7567/JJAP.51.090119 ↗
12. Platinum−carbon electrocatalytic composites via liposome-directed electrodeposition at conductive diamond10.1016/j.ijhydene.2016.05.226 ↗
13. Enhanced activity for methanol oxidation of platinum particles supported on iridium oxide modified boron-doped diamond powder10.1002/celc.201700155 ↗
14. Instability of supported platinum nanoparticles in low-temperature fuel cells, Top
15. Scientific aspects of polymer electrolyte fuel cell durability and degradation10.1021/cr050182l ↗
16. Platinum nanocatalysts on metal oxide based supports for low temperature fuel cell applications10.1039/C5RA22403A ↗
17. Sub-stoichiometric titanium oxide-supported platinum electrocatalyst for polymer electrolyte fuel cells, Electrochem
18. Thin film Pt/TiO2 catalysts for the polymer electrolyte fuel cell10.1016/j.jpowsour.2006.10.005 ↗
19. Multi-scale dispersion in fuel cell anode catalysts: role of TiO2 towards achieving nanostructured materials10.1016/j.jpowsour.2006.04.135 ↗
20. High-resolution electrochemical, electrical, and structural characterization of a dimensionally stable Ti/TiO2/Pt electrode10.1149/1.1479158 ↗
21. Electrochemical response of a composite Pt/TiO2 layer formed potentiodynamically on titanium surfaces10.1016/j.electacta.2004.11.062 ↗
22. Role of surfactant-mediated electrodeposited titanium oxide substrate in improving electrocatalytic features of supported platinum particles10.1016/j.apsusc.2013.10.092 ↗
23. Effect of TiO2 on Pt-Ru-based anodes for methanol electroreforming10.1016/j.apcatb.2018.06.055 ↗
24. Novel dynamic effects in electrocatalysis of methanol oxidation on supported nanoporous TiO2 bimetallic nanocatalysts10.1016/j.electacta.2007.01.056 ↗
25. Maximized specific activity for the methanol electrooxidation by the optimized PtRu-TiO2-carbon nano-composite structure
26. Hydrogen treatment as potential protection of electrodeposited Pt, Au, and Pt/Au oxygen reduction catalysts on TiOx10.1007/s12678-018-0489-8 ↗
27. Spillover in heterogeneous catalysis10.1021/cr00035a014 ↗
28. Electrocatalytic properties of TiO2-embedded Pt nanoparticles in oxidation of methanol: Particle size effect and proton spillover Effect10.1007/s12678-011-0066-x ↗
29. Ceramic materials as supports for low-temperature fuel cell catalysts10.1016/j.ssi.2009.03.007 ↗
30. Electrodeposition of a Pt monolayer film: using kinetic limitations for atomic layer epitaxy10.1021/ja4051795 ↗
31. Carbon monoxide tolerant platinum electrocatalysts on niobium doped titania and carbon nanotube composite supports10.1016/j.jpowsour.2014.09.054 ↗
32. Effect of the chemical termination of conductive diamond substrate on the resistance to carbon monoxide-poisoning during methanol oxidation of platinum particles10.1016/j.jpowsour.2014.03.044 ↗
33. Enhanced electrocatalytic performance for methanol oxidation on Pt–TiO2/ITO electrode under UV illumination10.1016/j.ijhydene.2010.09.025 ↗
34. Electrocatalytic and photocatalytic activity of TiO2–Pt films on boron-doped diamond substrate10.1016/j.apsusc.2012.09.121 ↗
35. Photo-assisted methanol oxidation on Pt-TiO2 catalysts for direct methanol fuel cells: a short review10.1016/j.apcatb.2018.06.029 ↗
36. Photocatalytic properties of titanium dioxide (TiO2)10.1021/cm00027a008 ↗
37. PtNi alloy nanoparticles supported on carbon-doped TiO2 nanotube arrays for photo-assisted methanol oxidation10.1016/j.electacta.2012.10.136 ↗
38. Zhu · 2016 · 435
39. Structural and electrochemical characterization of TiO2/Pt hybrid catalyst system for direct bio-ethanol fuel cell
40. TiO2 photocatalysis: Design and applications10.1016/j.jphotochemrev.2012.06.001 ↗
41. Photoenergy conversion with TiO2 photocatalysis: new materials and recent applications10.1016/j.electacta.2012.03.035 ↗
42. Preparation and photocatalytic activity of robust titania monoliths for water remediation10.1021/am302654r ↗
43. Enhanced wear resistance of titanium surfaces by a new thermal oxidation treatment10.1016/S0043-1648(99)00359-2 ↗
44. Electrochemical characterization of copper deposited on plasma and thermally modified titanium surfaces10.1007/s11663-998-0133-8 ↗
45. Investigation and evaluation of structural color of TiO2 coating on stainless steel10.1016/j.ceramint.2011.05.130 ↗
46. Preparation of TiO2 (anatase) films on electrodes by anodic oxidative hydrolysis of TiCl310.1016/0022-0728(93)85020-H ↗
47. Influence of boron-doped diamond surface termination on the characteristics of titanium dioxide anodically deposited in the presence of a surfactant10.1149/2.0741508jes ↗
48. Recent advances in laser surface treatment of titanium alloys10.2351/1.3574020 ↗
49. Laser-induced oxidation of titanium substrate: analysis of the physicochemical structure of the surface and sub-surface layers10.1016/j.apsusc.2014.11.062 ↗
50. Scanning electron microscopical analysis of laser-treated titanium implant surfaces–a comparative study10.1016/S0142-9612(00)00002-8 ↗
51. Corrosion resistance of laser treated titanium alloy with B4C particles at the surface10.3139/146.111105 ↗
52. Stability, reactivity and breakdown of passive films. Problems of recent and future research10.1016/S0013-4686(00)00347-9 ↗
53. CO-terminated Pt/Au codeposition on titania nanotube arrays (TNAs)10.1007/s12678-017-0405-7 ↗
54. The native oxide on titanium metal as a conductive model substrate for oxygen reduction reaction studies10.1007/s12678-018-0465-3 ↗
55. Electrocatalysis in the anodic evolution of oxygen and chlorine, Electrochim
56. Influence of the valve metal oxide on the properties of ruthenium based mixed oxide electrodes: II. RuO2/TiO2 coatings10.1149/1.2097498 ↗
57. Effect of an etching Ti substrate on a catalytic oxide electrode10.1149/1.1349882 ↗
58. Formation of nanostructure in magnesium diboride based materials with high superconducting characteristics10.1063/1.4952985 ↗
59. Naumkin
60. Surface analytical study of carbothermally reduced titania films for electrocatalysis application10.1016/j.electacta.2012.02.044 ↗
61. Moulder · 1995
62. X-ray photoelectron spectroscopy study of Pt-oxide thin films deposited by reactive sputtering using O2/Ar gas mixtures10.1143/JJAP.38.4872 ↗
63. Structure sensitivity in the electrocatalytic properties of Pt: I. Hydrogen adsorption on low index single crystals and the role of steps10.1149/1.2128990 ↗
64. Recent progress in the development of anode and cathode catalysts for direct methanol fuel cells10.1016/j.nanoen.2013.06.009 ↗
65. Direct methanol oxidation at low overpotentials using Pt nanoparticles electrodeposited at ultrathin conductive RuO2 nanoskins10.1039/c2jm15553b ↗
66. Electrochemical deposition of Pt–RuOx⋅nH2O composites on conductive diamond and its application to methanol oxidation in acidic media10.1007/s12678-015-0292-8 ↗
67. Catalytic methanol decomposition pathways on a platinum electrode10.1021/jp000193c ↗
68. Electrocatalysis of methanol oxidation10.1016/S0013-4686(02)00336-5 ↗
69. Electrocatalytic activity of Pt nanoparticles deposited on porous TiO2 supports toward methanol oxidation10.1016/j.apcatb.2009.07.008 ↗
70. Photodesorption of CO and CO+ from Pt(111): mechanism and site specificity10.1063/1.469697 ↗
71. Electrical conductivity of thermally grown titanium oxide films10.1007/BF01132943 ↗
72. Effect of thermal oxidation on corrosion resistance of commercially pure titanium in acid medium10.1007/s11665-011-9970-8 ↗
73. Thermal oxidation behavior of bulk titanium with nanocrystalline surface layer10.1016/j.corsci.2012.03.005 ↗
74. Thermal oxidation of titanium: evaluation of corrosion resistance as a function of cooling rate10.1016/j.matchemphys.2012.12.020 ↗
75. Elipsometric study of anodic oxide films on titanium in hydrochloric acid, sulfuric acid and phosphate solution10.1149/1.2113958 ↗
76. Amorphous TiO2 nanostructures: synthesis, fundamental properties and photocatalytic applications10.1039/C9CY01020C ↗
77. Effect of annealing temperature on the photocatalytic activity of TiO2 thin films10.1016/j.egypro.2013.06.794 ↗
78. Improving the electrical contact at a Pt/TiO2 nanowire interface by selective application of focused femtosecond laser irradiation10.1088/1361-6528/aa8150 ↗