Binder migration during drying of lithium-ion battery electrodes: Modelling and comparison to experiment
Source abstract
Abstract
The drying process is a crucial step in electrode manufacture as it can affect the component distribution within the electrode. Phenomena such as binder migration can have negative effects in the form of poor cell performance (e.g. capacity fade) or mechanical failure (e.g. electrode delamination from the current collector). We present a mathematical model that tracks the evolution of the binder concentration in the electrode during drying. Solutions to the model predict that low drying rates lead to a favourable homogeneous binder profile across the electrode film, whereas high drying rates result in an unfavourable accumulation of binder near the evaporation surface. These results show strong qualitative agreement with experimental observations and provide a cogent explanation for why fast drying conditions result in poorly performing electrodes. Finally, we provide some guidelines on how the drying process could be optimised to offer relatively short drying times whilst simultaneously maintaining a roughly homogeneous binder distribution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. A review on the key issues for lithium-ion battery management in electric vehicles10.1016/j.jpowsour.2012.10.060 ↗
2. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
3. Analysis of integrated electrode stacks for lithium ion batteries10.1016/j.jpowsour.2013.11.065 ↗
4. Thick electrodes for high energy lithium ion batteries10.1149/2.0401507jes ↗
5. Influence of convective drying parameters on electrode performance and physical electrode properties10.1149/06422.0057ecst ↗
6. Investigation of film solidification and binder migration during drying of Li-Ion battery anodes10.1016/j.jpowsour.2016.04.018 ↗
7. Effect of mixing sequences on the electrode characteristics of lithium-ion rechargeable batteries10.1016/S0378-7753(99)00281-5 ↗
8. Effect of slurry preparation process on electrochemical performances of LiCoO2 composite electrode10.1016/j.jpowsour.2009.12.101 ↗
9. Delamination behavior of lithium-ion battery anodes: influence of drying temperature during electrode processing10.1080/07373937.2015.1060497 ↗
10. Synthesis and electrochemical studies on Li2CuSnO4 and Li2CuSnSiO6 as negative electrode in the lithium batteries10.1149/1.3393842 ↗
11. Kornherr · 2016
12. Microstructure formation of lithium-ion battery electrodes during drying — an ex-situ study using cryogenic broad ion beam slope-cutting and scanning electron microscopy (Cryo-BIB-SEM)10.1016/j.jpowsour.2017.01.117 ↗
13. Rheological properties and stability of nmp based cathode slurries for lithium ion batteries10.1016/j.ceramint.2013.08.137 ↗
14. A. Kraytsberg, Y. Ein-Eli, Conveying Advanced Li-ion Battery Materials into Practice the Impact of Electrode Slurry Preparation Skills, Advanced Energy Materials 6(21).10.1002/aenm.201600655 ↗
15. Slot-die processing of lithium-ion battery electrodes — coating window characterization10.1016/j.cep.2012.10.011 ↗
16. Slot die coating of lithium-ion battery electrodes: investigations on edge effect issues for stripe and pattern coatings10.1007/s11998-013-9498-y ↗
17. Prospects for reducing the processing cost of lithium ion batteries10.1016/j.jpowsour.2014.11.019 ↗
18. Experimental investigation into battery electrode surfaces: the distribution of liquid at the surface and the emptying of pores during drying10.1016/j.jcis.2017.01.063 ↗
19. A Raman spectroscopic method to find binder distribution in electrodes during drying10.1007/s11998-013-9509-z ↗
20. Investigation of binder distribution in graphite anodes for lithium-ion batteries10.1016/j.jpowsour.2016.11.051 ↗
21. Experiment and simulation of the fabrication process of lithium-ion battery cathodes for determining microstructure and mechanical properties10.1016/j.jpowsour.2016.02.014 ↗
22. Mechanistic understanding of the role of evaporation in electrode processing10.1149/2.1271707jes ↗
23. Small things make a big difference: binder effects on the performance of Li and Na batteries10.1039/C4CP02475C ↗
24. Drying regime maps for particulate coatings10.1002/aic.12190 ↗
25. Crust formation in drying colloidal suspensions
26. Autostratification in drying colloidal dispersions: effect of particle interactions10.1021/la2039762 ↗
27. Auto-stratification in drying colloidal dispersions: a diffusive model10.1016/j.jcis.2012.03.045 ↗
28. Dynamics of slowly evaporating solvent-polymer mixture with deformable upper surface10.1093/imamat/hxu024 ↗
29. A two-phase model for evaporating solvent-polymer mixtures10.1137/15M1035707 ↗
30. Dortmund data bank, http://www.ddbst.com (2018).
31. Molar heat capacity of aqueous sulfolane, 4-formylmorpholine, 1-methyl-2-pyrrolidinone, and triethylene glycol dimethyl ether solutions from (303.15 to 353.15) k10.1021/je800999s ↗
32. Thermodynamic properties of binary mixtures of p-xylene with cyclohexane, heptane, octane, and n-methyl-2-pyrrolidone at several temperatures10.1021/je049776w ↗
33. Mussel-inspired adhesive binders for high-performance silicon nanoparticle anodes in lithium-ion batteries10.1002/adma.201203981 ↗
34. Berechnung verschiedener physikalischer konstanten von heterogenen substanzen10.1002/andp.19354160705 ↗
35. The role of solvent evaporation in the microstructure of electroactive beta-poly(vinylidene fluoride) membranes obtained by isothermal crystallization10.1080/1539445X.2010.525442 ↗
36. Validity of the Bruggeman relation for porous electrodes10.1088/0965-0393/21/7/074009 ↗
37. Physical models of diffusion for polymer solutions, gels and solids10.1016/S0079-6700(99)00016-7 ↗