journal article·2015-07

Dithionite/air direct ion liquid fuel cell

Jens Noack, Jens Tübke, Karsten Pinkwart

Publisher page

Abstract

Abstract The feasibility of an alkaline S 2 O 4 2− /air-fuel cell was evaluated at room temperature, using a cell with an anion exchange membrane and a platinum oxygen reduction reaction catalyst. The tests performed were open circuit voltage analysis, linear sweep voltammetry, discharge analysis and electrochemical impedance spectroscopy (EIS) with registration of anode half-cell potential. With 0.85 M Na 2 S 2 O 4 in 2 M KOH, the cell achieved a maximum power density of 2 mW cm −2 , and the open circuit cell voltage was about 0.9 V. In a potentiostatic discharging at 0.2 V cell voltage, an energy efficiency of 12.3% was achieved at an energy density of 8.6 Wh L −1 . The low power density was mainly due to the low reaction kinetics of dithionite oxidation at graphite electrodes. The low energy efficiency was mainly caused by a low cathode potential, which probably resulted from mixed potential formation and the low anode kinetics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advanced battery technologies research · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Grid flexibility and storage required to achieve very high penetration of variable renewable electricity10.1016/j.enpol.2011.01.019 ↗
2. Estimation of the energy storage requirement of a future 100% renewable energy system in Japan
3. Energy storage: applications and challenges10.1016/j.solmat.2013.08.015 ↗
4. A comparative overview of large-scale battery systems for electricity storage10.1016/j.rser.2013.07.017 ↗
5. Performance of vanadium-oxygen redox fuel cell10.1007/s10800-011-0342-8 ↗
6. A polyelectrolyte membrane-based vanadium/air redox flow battery10.1016/j.elecom.2010.11.025 ↗
7. Development and characterization of a 280 cm2 vanadium/oxygen fuel cell
8. Kinetics and mechanism of the oxidation of sodium dithionite at a platinum electrode in alkaline solution10.1016/S0022-0728(03)00255-9 ↗
9. Electrochemical behaviour of sodium dithionite and sulfite at a gold electrode in alkaline solution10.1016/S0022-0728(01)00656-8 ↗
10. Influence of changes of platinum electrode surface condition on the kinetics of the oxidation of sodium dithionite and sulfite in alkaline solution10.1016/S1388-2481(00)00109-0 ↗
11. 2009 · vol. 2 · 941
12. 2003 · vol. 2 · 555
13. Electrosynthesis of sodium hydrosulfite: I. Development of an online process control monitor10.1149/1.1838913 ↗
14. Electrosynthesis of sodium hydrosulfite: II. The effect of Cathode Material10.1149/1.1838914 ↗
15. A review on non-precious metal electrocatalysts for PEM fuel cells10.1039/c0ee00558d ↗