Matching of critical parameters in a small non-pressurized non-humidified PEMFC stack
Source abstract
Abstract
The desired performance of a proton exchange membrane fuel cell (PEMFC) stack is always hindered by improper matching of critical design and operating parameters associated with the stack. This paper presents typical design considerations for a small stack, which essentially operates under non-pressurized and non-humidified conditions. With the objective of maximized energy efficiency (or fuel economy), the relationships between conductivity and water loading, water loading and relative humidity, and relative humidity and air stoichiometric number were established under different temperatures. Through these relationships, the conductivity, which is performance related, is correlated with the air stoichiometric number. Thus, the latter has become the sole control parameter for the small PEMFC stack at a fixed temperature operating under the above mentioned constraints. The results show that, under a low air stoichiometric number, the higher the operating temperature is, the higher the conductivity will be. However, opposite trend can be seen for high air stoichiometric number. For a fixed operating temperature, the conductivity drops dramatically when the air stoichiometric number exceeds the threshold value. The higher the operating temperature, the more rapid drop of the conductivity against the increased air stoichiometric number will be.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Analysis of a simple solid oxide fuel cell system with gas dynamic in afterburner and connecting pipes10.1002/fuce.200400047 ↗
2. Modeling fuel cell stack systems10.1016/S0378-7753(97)02812-7 ↗
3. Development and application of a generalized steady-state electrochemical model for a PEM fuel cell10.1016/S0378-7753(99)00484-X ↗
4. Stack design and performance of polymer electrolyte membrane fuel cells10.1016/S0378-7753(00)00539-5 ↗
5. Catalyst layer models for proton exchange membrane fuel cells10.1002/1521-4125(200101)24:1<51::AID-CEAT51>3.0.CO;2-I ↗
6. Evaluation of current distribution in a proton exchange membrane fuel cell by segmented cell approach10.1016/S0378-7753(02)00352-X ↗
7. Effect of channel dimensions and shape in the flow-field distributor on the performance of polymer electrolyte membrane fuel cells10.1016/S0378-7753(02)00475-5 ↗
8. A mathematical model of polymer electrolyte fuel cell with anode CO kinetics10.1016/S0013-4686(03)00269-X ↗
9. Mathematical model of a gas diffusion electrode bonded to a polymer electrolyte10.1002/aic.690370805 ↗
10. Model for polymer electrolyte fuel cell operation on reformate feed—effects of CO, H2 dilution, and high fuel utilization10.1149/1.1344516 ↗
11. Evaluation of planar free-breathing polymer electrolyte membrane fuel cell design10.1016/j.jpowsour.2003.11.012 ↗
12. Systematic parameter estimation for PEM fuel cell models10.1016/j.jpowsour.2004.12.024 ↗
13. Modeling of conductive transport in proton-exchange membranes for fuel cells10.1149/1.1393890 ↗
14. Water uptake by and transport through Nafion 117 membranes10.1149/1.2056194 ↗
15. Adamson · 1997