journal article·2024-12

Harmonious balance of strength and toughness: Carbon-modified effusive-rock-like Fe-Sn alloy for stable Li storage

Jintao Dai, Sunan Rong, Peng Xiang, Shichao Zhang, Wenbo Liu

Publisher page

Abstract

For the integrated electrodes of lithium-ion batteries, a strong substrate is crucial to maintain stable electrochemical performance. Therefore, this work proposes a concept to achieve a harmonious balance between strength and toughness in an integrated electrode by combining the Sn-based alloy, which introduces a strengthening phase, and amorphous carbon. Three-dimensional hierarchical porous FeSn/FeSn 2 integrated anodes are prepared based on Fe 45Sn 55 alloys using a simple dealloying method to verify the concept. FeSn 2, as a strengthening phase within the FeSn porous alloy, enhances the structural stability of the porous structure under mechanical stress. An amorphous carbon layer with excellent toughness is coated on the surface of the porous alloy, which buffers the volume expansion of Sn and slows down the accumulation rate of stress in the porous structure. Additionally, Fe and Sn produced as electrochemical reaction products act as the inert-active system, uniformly distributing throughout the porous structure, which further buffers the volume expansion of Sn and improves the conductivity of the electrode, allowing it to maintain a reversible capacity of 1.43 mAh cm −2 after 300 cycles at 1 mA cm −2.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced materials and composites · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. High-performance silicon-rich microparticle anodes for lithium-ion batteries enabled by internal stress mitigation10.1007/s40820-023-01190-7 ↗
2. Identifying cathode and anode polarizations during practical high-rate charging/discharging in different Li-ion pouch batteries10.1002/bte2.20220025 ↗
3. Highly textured and crystalline materials for rechargeable Li-ion batteries10.1002/bte2.20230010 ↗
4. Atomically dispersed Sn incorporated into carbon matrix for stable electrochemical lithium storage10.1016/j.cej.2022.135340 ↗
5. Rational design of PANI-modified three-dimensional dendritic hierarchical porous Cu–Sn nanocomposites as thick anodes with ultrahigh areal capacity and good cycling stability10.1002/bte2.20220032 ↗
6. Sn-based nanomaterials: from composition and structural design to their electrochemical performances for Li- and Na-ion batteries10.1016/j.ensm.2021.09.026 ↗
7. A sustainable strategy for fabricating porous carbon supported Sn submicron spheres by self-generated Na2CO3 as templates for lithium-ion battery anode10.1039/D1GC01345A ↗
8. A unique structural highly compacted binder-free silicon-based anode with high electronic conductivity for high-performance lithium-ion batteries10.1002/sstr.202100174 ↗
9. Single-atomic Co-B2N2 sites anchored on carbon nanotube arrays promote lithium polysulfide conversion in lithium–sulfur batteries10.1002/cey2.306 ↗
10. Integration of desulfurization and Lithium-Sulfur batteries enabled by amino-functionalized porous carbon nanofibers10.1002/eem2.12349 ↗
11. Stress-relief engineering in a N-doped C-modified hierarchical nanoporous Si anode with a microcurved pore wall structure for enhanced lithium storage10.1021/acsami.3c16533 ↗
12. Chemically monodisperse tin nanoparticles on monolithic 3D nanoporous copper for lithium ion battery anodes with ultralong cycle life and stable lithium storage properties10.1039/C8NR09398A ↗
13. Facile one-pot synthesis of nanoporous copper ribbons with bimodal pore size distributions by chemical dealloying10.1149/1.3622288 ↗
14. Self-sacrificial template synthesis of Fe, N co-doped porous carbon as efficient oxygen reduction electrocatalysts towards Zn-air battery application10.1016/j.cclet.2021.09.014 ↗
15. Growth of conformal graphene cages on micrometre-sized silicon particles as stable battery anodes
16. Hierarchical porous silicon structures with extraordinary mechanical strength as high-performance lithium-ion battery anodes10.1038/s41467-020-15217-9 ↗
17. “Mobius strip-like” FeSn alloy: a novel highly-distorted 3D hierarchical porous anode for ultrafast and stable Li storage
18. Recent progress of self-supported anode materials for Li-ion batteries10.1016/j.est.2024.113188 ↗
19. The conflicts between strength and toughness10.1038/nmat3115 ↗
20. Grain boundary stability governs hardening and softening in extremely fine nanograined metals10.1126/science.aal5166 ↗
21. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
22. Dealloying behavior of dual-phase Al 15 at.% Cu alloy in an acidic solution10.1016/S1452-3981(23)13877-6 ↗
23. Monolithic nanoporous copper ribbons from Mg-Cu alloys with copper contents below 33 at.%: fabrication, structure evolution and coarsening behavior along the thickness direction10.1016/S1452-3981(23)18419-7 ↗
24. Effects of various second phase ratios and contents on microstructure and mechanical properties of eutectic Sn58Bi alloy
25. Biomimetics-inspired architecture enables the strength–toughness of ultrahigh-loading silicon electrode10.1002/adfm.202314058 ↗
26. Physicochemical dual cross-linking conductive polymeric networks combining high strength and high toughness enable stable operation of silicon microparticle anodes10.1002/adma.202301320 ↗
27. Interweaving elastic and hydrogen bond-forming polymers into highly tough and stress-relaxable binders for high-performance silicon anode in lithium-ion batteries10.1002/advs.202302027 ↗
28. An eggshell-structured N-doped silicon composite anode with high anti-pulverization and favorable electronic conductivity10.1016/j.jpowsour.2019.227265 ↗
29. Si@C microsphere composite with multiple buffer structures for high-performance lithium-ion battery anodes10.1002/chem.201801417 ↗
30. A novel Si/Sn composite with entangled ribbon structure as anode materials for lithium ion battery
31. Achieving a double advantage through design of TiO2/C interlaced coating for Si anode10.1002/batt.202400130 ↗
32. Mechanical properties of the 3D polymerized, amorphous, and diamond-plus-graphite nanocomposite carbon phases prepared from under high pressure10.1063/1.368021 ↗
33. Effect of alternating a-C:H multilayer full coating on fracture behavior of single-crystal silicon-based microstructure in tensile and toughness tests10.1016/j.msea.2021.142054 ↗
34. Hard yet tough V-Al-C-N nanocomposite coatings: microstructure, mechanical and tribological properties10.1016/j.surfcoat.2016.07.061 ↗
35. Toughening Fe-based amorphous coatings by reinforcement of amorphous
36. Interwoven poly (anthraquinonyl sulfide) nanosheets-decorated carbon nanotubes as core-sheath heteroarchitectured cathodes for polymer-based asymmetrical full batteries10.1002/eem2.12564 ↗
37. Cascading V2O3/N-doped carbon hybrid nanosheets as high-performance cathode materials for aqueous zinc-ion batteries10.1016/j.cclet.2021.08.058 ↗
38. Ni3Sn4 electrodes for Li-ion batteries: Li−Sn alloying process and electrode/electrolyte interface phenomena10.1021/cm8006099 ↗
39. In situ synthesis of the peapod-like Cu–SnO2@copper foam as anode with excellent cycle stability and high area specific capacity10.1002/adfm.202170240 ↗
40. New properties of Fe3O4@SnO2 core shell nanoparticles following interface charge/spin transfer10.1016/j.apsusc.2017.07.267 ↗
41. Sn anodes protected by intermetallic FeSn2 layers for long-lifespan sodium-ion batteries with high initial coulombic efficiency of 93.810.1002/anie.202219177 ↗
42. Enabling iron-based highly effective electrochemical water-splitting and selective oxygenation of organic substrates through in situ surface modification of intermetallic iron stannide precatalyst10.1002/aenm.202001377 ↗
43. In-situ synthesized carbon-coated Sn-SnO2 nanoparticles embedded in carbon nanotubes on Cu foam as anode material for lithium-ion batteries10.1016/j.jpcs.2022.110693 ↗
44. Decorating phosphorus anode with SnO2 nanoparticles to enhance polyphosphides chemisorption for high-performance lithium-ion batteries10.1021/acs.nanolett.3c00656 ↗
45. Heterostructured Mn3O4-MnS multi-shelled hollow spheres for enhanced polysulfide regulation in Lithium-Sulfur batteries10.1002/eem2.12475 ↗
46. Facile synthesis of graphene supported FeSn2 nanocrystals with enhanced Li-storage capability10.1039/c4ra00604f ↗
47. Nanostructured FeSn2/SnO2-based composites as high-performance anodes for lithium-ion batteries10.1016/j.jallcom.2019.06.280 ↗
48. Comparison between microparticles and nanostructured particles of FeSn2 as anode materials for Li-ion batteries10.1016/j.jpowsour.2010.09.113 ↗
49. The electrochemical behavior of low-temperature synthesized FeSn2 nanoparticles as anode materials for Li-ion batteries10.1016/j.jpowsour.2010.10.071 ↗
50. Enabling stable high-performance CoO-assisted Si@C anode via ball milling strategy10.1016/j.jpcs.2024.111956 ↗
51. Stable lithium storage of hierarchical Zn2SiO4/C micro-/nanospheres enabled by in-situ introduction of an endogenous Zn4Si2O7(OH)210.1016/j.jallcom.2024.175136 ↗
52. Matryoshka-type carbon-stabilized hollow Si spheres as an advanced anode material for lithium-ion batteries10.1016/j.cclet.2021.10.039 ↗
53. A review: enhanced anodes of Li/Na-ion batteries based on yolk-shell structured nanomaterials10.1007/s40820-018-0194-4 ↗
54. Steady cycling of lithium metal anode enabled by alloying Sn-modified carbon nanofibers10.1039/D3TA02379F ↗
55. Nanostructured anatase TiO2 as anode of high-performance lithium-ion batteries10.1002/bte2.20220018 ↗
56. Single Zn atoms anchored on hollow carbon nanofiber network for dendrite-free lithium metal anode of flexible Li–S full cell10.1007/s12598-023-02360-7 ↗
57. A cation and anion dual-doping strategy in novel Li-rich Mn-based cathode materials for high-performance Li metal batteries
58. Novel three dimensional hierarchical porous Sn-Ni alloys as anode for lithium ion batteries with long cycle life by pulse electrodeposition10.1016/j.cej.2018.06.031 ↗
59. Sn-C binary nanocomposites for lithium ion batteries: core-shell vs. multilayer structure10.1016/j.electacta.2018.02.005 ↗
60. One-step hydrothermal reduction synthesis of tiny Sn/SnO2 nanoparticles sandwiching between spherical graphene with excellent lithium storage cycling performances10.1016/j.electacta.2018.09.141 ↗
61. Ultrafine SnO2 nanoparticles anchored on N, P-doped porous carbon as anodes for high performance lithium-ion and sodium-ion batteries10.1016/j.jcis.2020.03.063 ↗
62. Highly monodispersed graphene/SnO2 hybrid nanosheets as bifunctional anode materials of Li-ion and Na-ion batteries10.1016/j.jallcom.2019.153506 ↗
63. Facile synthesis of M-Sb (M=Ni, Sn) alloy nanoparticles embedded in N-doped carbon nanosheets as high performance anode materials for lithium ion batteries10.1016/j.cej.2018.05.043 ↗
64. MoS2 encapsulated SnO2 -SnS/C nanosheets as a high performance anode material for lithium ion batteries10.1016/j.cej.2017.01.111 ↗
65. Sn-based intermetallic alloy anode materials for the application of lithium ion batteries10.1016/j.electacta.2015.02.057 ↗
66. Close-packing of hierarchically structured C@Sn@C nanofibers for high-performance Li-ion battery with large gravimetric and volumetric energy densities10.1016/j.cej.2018.03.078 ↗
67. Nanoarchitectured TiO2/SnO: a future negative electrode for high power density Li-ion microbatteries?10.1021/cm9037044 ↗
68. Hierarchical micro-lamella-structured 3D porous copper current collector coated with tin for advanced lithium-ion batteries10.1016/j.apsusc.2016.12.043 ↗
69. Construction of nanoflower SnS2 anchored on g-C3N4 nanosheets composite as highly efficient anode for lithium ion batteries10.1016/j.electacta.2018.10.020 ↗