Enhancement of mass transfer through under-rib convection in polymer electrolyte fuel cell with dimensionless moduli analysis
Source abstract
Abstract
The significance of under-rib convection in the flow field development of polymer electrolyte fuel cells (PEFCs) is increasingly recognized. This study quantitatively evaluates the interplay between mass transfer and reaction processes in adjacent channels, affected by under-rib convection. A comprehensive analysis identifies that oxygen mole fraction and current density profiles in the channel-rib direction are governed by five dimensionless moduli. The effectiveness factor, defined as the ratio of the integral average under-rib current density to that without mass transfer resistance, elucidates the potential for current density enhancement due to under-rib convection. Experimental results demonstrate a significant increase in the under-rib current density from 0.15 to 0.32 A cm⁻ 2 as the pressure difference between adjacent channels rises from 0 to 929 Pa at 0.60 V and 0.52 relative humidity. This corresponds to an increase in the effectiveness factor from 0.37 to 0.77 and a Péclet number increase from 0 to 34.8. Model predictions indicate that the maximum net power density is achieved at a Péclet number of 60, balancing under-rib convection benefits and pumping pressure. Validated by experimental results, the model aids in reaction kinetics analysis and polarization prediction, offering significant insights and practical guidelines for electrochemical reactor optimization. • Under-rib convection affecting transport-reaction interactions is evaluated. • Dimensionless moduli determine the channel-rib oxygen and reaction profiles. • Polarization behaviors with varied pressure differences were measured and reproduced. • An optimal pressure difference maximizing the net power density is obtained. • The model demonstrates capability in kinetics analysis and polarization prediction.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Engineering catalyst layers for next-generation polymer electrolyte fuel cells: a review of design, materials, and methods10.1002/aenm.202101025 ↗
2. Recent advancements in high performance polymer electrolyte fuel cell electrode fabrication – novel materials and manufacturing processes10.1016/j.jpowsour.2023.232734 ↗
3. Comprehensive performance assessment of a novel biomass-based CCHP system integrated with SOFC and HT-PEMFC10.1016/j.energy.2024.131112 ↗
4. Designing the next generation of proton-exchange membrane fuel cells10.1038/s41586-021-03482-7 ↗
5. Flow field patterns for proton exchange membrane fuel cells10.3389/fenrg.2020.00013 ↗
6. A comprehensive study of the effect of bipolar plate (BP) geometry design on the performance of proton exchange membrane (PEM) fuel cells10.1016/j.rser.2019.04.081 ↗
7. Review of bipolar plates in PEM fuel cells: flow-field designs10.1016/j.ijhydene.2004.09.019 ↗
8. Numerical optimization of channel to land width ratio for PEM fuel cell10.1016/j.ijhydene.2017.12.149 ↗
9. Flow field bipolar plates in a proton exchange membrane fuel cell: analysis & modeling10.1016/j.enconman.2016.10.053 ↗
10. Review of bipolar plates in PEM fuel cells: flow-field design10.1016/j.ijhydene.2004.09.019 ↗
11. A review of proton exchange membrane fuel cell's bipolar plate design and fabrication process10.1016/j.jpowsour.2022.231543 ↗
12. Modeling, design, materials and fabrication of bipolar plates for proton exchange membrane fuel cell: a review10.1016/j.apenergy.2021.117443 ↗
13. Review on current research of materials, fabrication and application for bipolar plate in proton exchange membrane fuel cell10.1016/j.ijhydene.2019.07.231 ↗
14. Effect of channel-rib width on water transport behavior in gas diffusion layer of polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2019.03.079 ↗
15. Multi-pass serpentine flow-fields to enhance under-rib convection in polymer electrolyte membrane fuel cells: design and geometrical characterization10.1016/j.jpowsour.2008.11.093 ↗
16. Effects of gas macromixing in polymer electrolyte fuel cell10.1149/1945-7111/aceb8c ↗
17. Biomimetic flow fields for proton exchange membrane fuel cells: a review of design trends10.1016/j.energy.2019.116435 ↗
18. Development of compact and high-performance fuel cell stack10.4271/2015-01-1175 ↗
19. An investigation of the PEM fuel cells performance with partially restricted cathode flow channels and metal foam as a flow distributor10.1016/j.energy.2016.10.101 ↗
20. Development of high-performance FC stack for the new MIRAI10.4271/2021-01-0740 ↗
21. Numerical modelling of in-line and staggered blockages in parallel flowfield channels of PEM fuel cells10.1016/j.ijhydene.2016.10.076 ↗
22. Effects of partially narrowed flow channel on performance of polymer electrolyte fuel cell10.1149/10909.0171ecst ↗
23. Numerical investigation of tapered flow field configurations for enhanced polymer electrolyte membrane fuel cell performance10.1016/j.apenergy.2021.118021 ↗
24. A review on flow field design for proton exchange membrane fuel cells: challenges to increase the active area for MW applications10.1016/j.rser.2023.114198 ↗
25. Current advances in polymer electrolyte fuel cells based on the promotional role of under-rib convection10.1002/fuce.201200035 ↗
26. Cross flow and distribution characteristics in automobile polymer electrolyte membrane fuel cells: a three-dimensional full-scale modeling study10.1016/j.jpowsour.2023.233348 ↗
27. Error of Darcy's law for serpentine flow fields: an analytical approach10.1016/j.ijhydene.2018.02.070 ↗
28. Measurement of relative permeability of fuel cell diffusion media10.1016/j.jpowsour.2009.12.105 ↗
29. In-plane and through-plane gas permeability of carbon fiber electrode backing layers10.1016/j.jpowsour.2006.06.096 ↗
30. In-situ measurements of GDL effective permeability and under-land cross-flow in a PEM fuel cell10.1016/j.ijhydene.2012.03.030 ↗
31. Estimation of through-plane and in-plane gas permeability across gas diffusion layers (GDLs): comparison with equivalent permeability in bipolar plates and relation to fuel cell performance10.1016/j.ijhydene.2020.03.026 ↗
32. A novel flow field design method for HT-PEM fuel cells: a hybrid topology and surrogate model10.1016/j.ijhydene.2023.05.040 ↗
33. Introducing a new serpentine configuration of gas channels to enhance the performance and reduce the water flooding in the PEMFC
34. Modeling of a polymer electrolyte membrane fuel cell with a hybrid continuum/discrete formulation at the rib/channel scale: effect of relative humidity and temperature on performance and two-phase transport10.1016/j.apenergy.2024.123332 ↗
35. A performance degradation prediction model for PEMFC based on bi-directional long short-term memory and multi-head self-attention mechanism10.1016/j.ijhydene.2024.02.181 ↗
36. Modeling the Influence of GDL and flow-field plate parameters on the reaction distribution in the PEMFC cathode catalyst layer10.1016/j.jpowsour.2004.11.035 ↗
37. An innovative Approach to predict the diffusion rate of Reactant's effects on the performance of the polymer electrolyte membrane fuel cell10.3390/math11194094 ↗
38. Investigation of polymer electrolyte membrane fuel cell parallel flow field with induced cross flow10.1016/j.jpowsour.2011.09.047 ↗
39. Direct measurement of current density under the land and channel in a PEM fuel cell with serpentine flow fields10.1016/j.jpowsour.2009.03.059 ↗
40. Direct measurement of current density under land and two channels in PEM fuel cells with interdigitated flow fields10.1016/j.ijhydene.2014.04.037 ↗
41. Measuring the current distribution in PEFCs with sub-millimeter resolution: I. Methodology10.1149/1.2345591 ↗
42. Sources of current density distribution in the land-channel direction of a PEMFC10.1149/2.0831609jes ↗
43. On the current distribution at the channel–rib scale in polymer-electrolyte fuel cells10.1016/j.ijhydene.2018.01.097 ↗
44. Dimensionless numbers and correlating equations for the analysis of the membrane-gas diffusion electrode assembly in polymer electrolyte fuel cells10.1016/j.jpowsour.2005.02.034 ↗
45. Electrochemical reaction engineering of polymer electrolyte fuel cell10.1002/aic.15545 ↗
46. Analytical solutions and dimensional analysis of pseudo 2D current density distribution model in PEM fuel cells10.1016/j.renene.2018.02.120 ↗
47. Combined effects of flow channel configuration and operating conditions on PEM fuel cell performance10.1016/j.enconman.2020.113046 ↗
48. Mass transfer enhancement of PEM fuel cells with optimized flow channel dimensions10.1016/j.ijhydene.2020.09.105 ↗
49. Scaling analysis of diffusion–reaction process in proton exchange membrane fuel cell with the second Damköhler number10.1016/j.cej.2023.143011 ↗
50. Dimensionless model analysis of PEFC cathode10.1149/07514.0147ecst ↗
51. Polymer electrolyte fuel cell modeling – a comparison of two models with different levels of complexity
52. Quantification method of mass transfer resistance in cathode catalyst layer in PEFC10.1149/11204.0121ecst ↗
53. Understanding the effect of kinetic and mass transport processes in cathode agglomerates10.1149/2.010408jes ↗
54. Along-the-channel modeling and analysis of PEFCs at low stoichiometry: development of a 1+2D model10.1016/j.electacta.2019.134963 ↗
55. Nomenclature for transport phenomena in electrolytic systems10.1351/pac198153101827 ↗
56. Morphology of quasi-two-dimensional electrodeposits–A generalized wagner number10.1021/la970021f ↗
57. Limiting local current densities for electrodes located on the walls of a rectangular channel with laminar flow; asymptotic solution and experimental verification10.1149/1.2408210 ↗
58. Ionic mass transfer in parallel plate electrochemical cells10.1007/BF00609131 ↗
59. X-ray computed tomography reconstruction and analysis of polymer electrolyte membrane fuel cell porous transport layers10.1016/j.ijhydene.2012.08.077 ↗
60. A simple method to measure through-plane effective gas diffusivity of a gas diffusion layer for polymer electrolyte fuel cells10.1016/j.ijheatmasstransfer.2022.122887 ↗
61. Diffusion media materials and characterization
62. Parameters estimation of a PEM fuel cell polarization curve and analysis of their behavior with temperature10.1016/j.jpowsour.2005.11.099 ↗
63. PEM fuel cell reaction kinetics in the temperature range of 23–120 °C10.1016/j.electacta.2006.09.008 ↗