Development and calibration of a fast flow model for solid oxide cell stack internal manifolds
Source abstract
Abstract
Due to the commercialization of solid oxide cells (SOC) progressing at an accelerated pace, computationally inexpensive SOC models adapted to the iterative nature of the engineering process are in increasing demand. Flow simulation in the stack is especially challenging in this regard because detailed computational fluid mechanic models are computationally demanding, while simplified models rely on pressure loss coefficients and friction factors not readily available in the literature. In this study, a computationally inexpensive algebraic model of an SOC stack internal manifold is developed and calibrated for laminar flow conditions. Thereby, pressure loss coefficients and Darcy friction factors are determined for a broad range of operating conditions through symbolic regression of Navier–Stokes flow simulation results of stacks of 20 to 40 cells. The derived Darcy friction factors for the inlet and outlet manifolds prove to be of particular importance, as they deviate strongly from the expressions assumed in similar modeling studies. The predictive power of the developed model is demonstrated by providing accurate predictions of the flow distribution in the stack, even outside of the calibration window.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Metallurgical Processes and Thermodynamics · Chemical Looping and Thermochemical Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. 2021
2. Sunfire · 2023
3. 2023
4. Characterizing the performance of kW-scale multi-stack solid oxide fuel cell modules through modeling10.1149/11106.0803ecst ↗
5. Modeling Elementary Heterogeneous Chemistry and Electrochemistry in Solid-Oxide Fuel Cells10.1149/1.2116607 ↗
6. A novel approach to model the transient behavior of solid-oxide fuel cell stacks10.1016/j.jpowsour.2012.03.114 ↗
7. Impacts of reactant flow nonuniformity on fuel cell performance and scaling-up: Comprehensive review, critical analysis and potential recommendations10.1016/j.ijhydene.2020.06.013 ↗
8. Toward mobility of solid oxide fuel cells10.1016/j.pecs.2023.101141 ↗
9. Thermal analysis of a 1-kW hydrogen-fueled solid oxide fuel cell stack by three-dimensional numerical simulation10.1016/j.enconman.2020.113213 ↗
10. Three-dimensional computational fluid dynamics modelling and experimental validation of the Jülich Mark-F solid oxide fuel cell stack10.1016/j.jpowsour.2017.10.030 ↗
11. Comprehensive computational fluid dynamics model of solid oxide fuel cell stacks10.1016/j.ijhydene.2016.05.103 ↗
12. A distributed resistance analogy for solid oxide fuel cells10.1080/10407790590907930 ↗
13. Pressure and flow distribution in internal gas manifolds of a fuel-cell stack10.1016/S0378-7753(02)00615-8 ↗
14. A generalized model of the flow distribution in channel networks of planar fuel cells10.1016/S0378-7753(02)00090-3 ↗
15. Distribution of gas flow in internally manifolded solid oxide fuel-cell stacks10.1016/S0378-7753(96)02469-X ↗
16. Idelchik · 2008
17. Modelling of polymer electrolyte membrane fuel cell stacks based on a hydraulic network approach10.1002/er.993 ↗
18. Benchmarking solid oxide electrolysis cell-stacks for industrial Power-to-Methane systems via hierarchical multi-scale modelling10.1016/j.apenergy.2022.119143 ↗
19. Continuum scale modelling and complementary experimentation of solid oxide cells10.1016/j.pecs.2020.100902 ↗
20. Investigation of solid oxide fuel cell sealing behavior under stack relevant conditions at Forschungszentrum Jülich10.1016/j.jpowsour.2010.09.041 ↗
21. Parametric study of kW-class solid oxide fuel cell stacks fueled by hydrogen and methane with fully multiphysical coupling model10.1016/j.ijhydene.2020.12.092 ↗
22. Dynamic modelling of a direct internal reforming solid oxide fuel cell stack based on single cell experiments10.1016/j.apenergy.2019.05.053 ↗
23. Electrochemical characterization and performance assessment of SOC stacks in electrolysis mode10.1149/09101.2589ecst ↗
24. Kendall · 2016
25. 2024
26. OpenFOAM: User Guide: simpleFoam. URL https://www.openfoam.com/documentation/guides/latest/doc/guide-applications-solvers-incompressible-simpleFoam.html.
27. Perspective: A method for uniform reporting of grid refinement studies10.1115/1.2910291 ↗
28. Segal · 2023
29. Cranmer · 2023
30. Modeling and design of PEM fuel cell stack based on a flow network method10.1016/j.applthermaleng.2018.08.050 ↗
31. Theory of flow distribution in manifolds10.1016/j.cej.2011.02.050 ↗
32. Performance analysis and optimization of PEM fuel cell stacks using flow network approach10.1016/j.jpowsour.2005.01.023 ↗
33. Theoretical microfluidics