The role of hydrophobicity and active layer thickness on degradation and durability of the air cathode in alkaline fuel cells
Source abstract
Abstract
The limited cycle life due to the degradation of the cathode is a major problem for commercializing alkaline fuel cells . In this work, a novel combination of in situ and post-mortem analyses have been conducted, along with modifying the thickness and ratio of carbon/binder within the active layer, to investigate the degradation and durability of an alkaline air cathode. In situ analyses such as monitoring the electrode potential and electrochemical impedance spectroscopy are applied. The increased potential loss is likely due to the flooding of electrolyte inside the primary macro structure of the active layer, increasing the mass transfer resistance for oxygen transport. Scanning electron microscopy analysis during the first 24 h of operation reveals that the degree of binder loading has no effect on the electrolyte ingress in the active layer. Higher durability is observed for the cathode with a thicker active layer. X-ray photoelectron spectroscopy data indicates that Pt loss is associated with the elimination of the carbon functional group. Volume rendering of the active layer from Nano-scale X-ray computed tomography has shown a higher porosity and larger pores for the failed cathode. Pt loss, and diminishing of side chain in the binder are observed by thermogravimetric analysis.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Electrochemical Analysis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Kinoshita · 1992
2. Advances, aging mechanism and lifetime in AFCs with circulating electrolytes10.1016/j.jpowsour.2003.09.019 ↗
3. Degradation characteristics of air cathode in zinc air fuel cells10.1016/j.jpowsour.2014.10.030 ↗
4. Review of gas diffusion cathodes for alkaline fuel cells10.1016/j.jpowsour.2008.10.106 ↗
5. The progress of metal-free catalysts for the oxygen reduction reaction based on theoretical simulations10.1039/C8TA02985G ↗
6. Reaction and transport in Ag/Ag2O gas diffusion electrodes of aqueous Li-O2 batteries: Experiments and modeling10.1016/j.jpowsour.2014.03.149 ↗
7. Breathing-mimicking electrocatalysis for oxygen evolution and reduction10.1016/j.joule.2018.11.015 ↗
8. Metal-free catalysts for oxygen reduction reaction10.1021/cr5003563 ↗
9. Exploration of the active center structure of nitrogen-doped graphene-based catalysts for oxygen reduction reaction10.1039/c2ee21802j ↗
10. Electrode materials for rechargeable zinc-ion and zinc-air batteries: current status and future perspectives
11. Manganese dioxide as a cathode catalyst for a direct alcohol or sodium borohydride fuel cell with a flowing alkaline electrolyte10.1016/j.jpowsour.2004.09.005 ↗
12. Nanoporous amorphous manganese oxide as electrocatalyst for oxygen reduction in alkaline solutions10.1016/S1388-2481(03)00053-5 ↗
13. Carbon-supported manganese oxide nanoparticles as electrocatalysts for the oxygen reduction reaction (ORR) in alkaline medium: physical characterizations and ORR mechanism10.1021/jp0647986 ↗
14. Structural analysis of alkaline fuel cell electrodes and electrode materials10.1016/0378-7753(89)80004-7 ↗
15. Influence of structure and hydrophobic properties on the characteristics of carbon—air electrodes10.1016/0378-7753(82)80004-9 ↗
16. The mechanism of operation of the teflon-bonded gas diffusion electrode: A mathematical model10.1149/1.2412232 ↗
17. On the assumptions underlying theoretical models for flooded porous electrodes10.1016/0013-4686(70)80044-5 ↗
18. Mechanistic insight into the accelerated decay of fuel cells from catalyst-layer structural failure10.1016/j.enconman.2020.113568 ↗
19. Fuel cell catalyst layers: a polymer science perspective10.1021/cm401445h ↗
20. Technologies for extending zinc–air battery’s cyclelife: A review10.1016/j.apenergy.2014.04.095 ↗
21. Effect of Pt and ionomer distribution on polymer electrolyte fuel cell performance and durability10.1021/acsaem.0c02841 ↗
22. Effect of polymer binders in anode catalyst layer on performance of alkaline direct ethanol fuel cells10.1016/j.jpowsour.2009.01.055 ↗
23. Effect of structure of the electrical performance of gas diffusion electrodes for metal air batteries10.1016/S0013-4686(00)00601-0 ↗
24. Gas diffusion and electrolyte penetration in porous gas diffusion electrodes10.1016/0013-4686(77)85148-7 ↗
25. Influence of the PTFE content in the diffusion layer of low-Pt loading electrodes for polymer electrolyte fuel cells10.1016/S0013-4686(98)00125-X ↗
26. Effects of KOH solution on the surface properties of teflon10.1016/0022-0728(86)80596-4 ↗
27. An evaluation of electrocatalytic activity and stability for air electrodes10.1016/j.jpowsour.2004.03.072 ↗
28. Electrolyte and water transfer through the porous electrodes of an immobilised-alkali hydrogen-oxygen fuel cell10.1016/0360-3199(95)00040-K ↗
29. A mechanism for alkaline cell leakage10.1007/BF00616428 ↗
30. On the problem of ageing of carbon—air electrodes in alkaline electrolytes10.1016/0378-7753(80)80106-6 ↗
31. The evolution of the performance of alkaline fuel cells with circulating electrolyte10.1016/j.jpowsour.2003.11.032 ↗
32. Carbon corrosion in proton-exchange membrane fuel cells: effect of the carbon structure, the degradation protocol, and the gas atmosphere10.1021/cs501973j ↗
33. Insights on platinum-carbon catalyst degradation mechanism for oxygen reduction reaction in acidic and alkaline media10.1016/j.jpowsour.2020.229356 ↗
34. Long-term operation of AFC electrodes with CO2 containing gases10.1016/j.jpowsour.2003.09.020 ↗
35. Analysis of Pt/C electrode performance in a flowing-electrolyte alkaline fuel cell10.1016/j.ijhydene.2011.10.078 ↗
36. Developments in X-ray tomography characterization for electrochemical devices10.1016/j.mattod.2019.05.019 ↗
37. The effect of nafion film on the cathode catalyst layer performance in a low–Pt PEM fuel cell10.1016/j.elecom.2019.05.003 ↗
38. Tipping water balance and the Pt loading effect in polymer electrolyte fuel cells: a model-based analysis10.1039/C8SE00026C ↗
39. Modeling hierarchical non-precious metal catalyst cathodes for PEFCs using multi-scale X-ray CT imaging10.1149/06403.0281ecst ↗
40. Determination of the thicknesses of the active layer and cathode limiting currents in AFC10.1016/j.elecom.2004.03.015 ↗
41. Simulation of influences of layer thicknesses in an alkaline fuel cell10.1023/A:1004046721157 ↗
42. Electrochemical energy storage for renewable energy integration: zinc-air flow batteries10.1007/s10800-017-1133-7 ↗
43. Direct use of alcohols and sodium borohydride as fuel in an alkaline fuel cell10.1016/j.jpowsour.2004.11.071 ↗
44. Iron-based cathode catalyst with enhanced power density in polymer electrolyte membrane fuel cells10.1038/ncomms1427 ↗
45. Understanding the effects of backpressure on PEM fuel cell reactions and performance10.1016/j.jelechem.2012.09.033 ↗
46. A novel technique for measuring current distributions in PEM fuel cells10.1016/j.jpowsour.2005.09.046 ↗
47. O’hayre · 2016
48. Engineering catalyst layers for next-generation polymer electrolyte fuel cells: A review of design, materials, and methods10.1002/aenm.202101025 ↗
49. Performance of alkaline fuel cells: A possible future energy system?10.1016/j.jpowsour.2006.03.052 ↗
50. Relationship between carbon corrosion and positive electrode potential in a proton-exchange membrane fuel cell during start/stop operation10.1016/j.jpowsour.2009.03.039 ↗
51. Performance increase for an open-cathode PEM fuel cell with humidity and temperature control10.1016/j.ijhydene.2017.10.087 ↗
52. Effect of temperature on the oxygen reduction reaction kinetic at nitrogen-doped carbon nanotubes for fuel cell cathode10.1016/j.ijhydene.2015.06.006 ↗
53. Accelerated degradation testing of gas diffusion electrodes for the chlor-alkali process10.1023/A:1025899204203 ↗
54. Initial conditioning of a polymer electrolyte fuel cells: The relationship between microstructure development and cell performance, investigated by small-angle neutron scattering10.1016/j.rinp.2019.01.066 ↗
55. Accelerated conditioning for a proton exchange membrane fuel cell10.1016/j.jpowsour.2012.01.039 ↗
56. Analysis of the effect of catalyst layer thickness on the performance and durability of platinum group metal-free catalysts for polymer electrolyte membrane fuel cells10.1039/C9SE00252A ↗
57. Measurements of pore size distribution, porosity, effective oxygen diffusivity, and tortuosity of PEM fuel cell electrodes10.1002/fuce.201200017 ↗
58. Lifetime simulation of rechargeable zinc-air battery based on electrode aging10.1016/j.est.2019.101191 ↗
59. Fuller · 2018
60. Electrochemical characterisation of oxygen reduction on teflon-bonded gas diffusion electrodes10.1016/0013-4686(95)00109-R ↗
61. Air electrode: identification of intraelectrode rate phenomena via ac impedance10.1149/1.2048480 ↗
62. Fuel cell reaction kinetics
63. Application of electrochemical impedance spectroscopy for fuel cell characterization: PEFC and oxygen reduction reaction in alkaline solution10.1002/fuce.200800071 ↗
64. The kinetics of oxygen reduction at porous teflon-bonded fuel cell electrodes10.1149/1.2115244 ↗
65. The determination of electrochemical active surface area and specific capacity revisited for the system MnOx as an oxygen evolution catalyst10.1515/zpch-2019-1514 ↗
66. Operando cathode activation with alkali metal cations for high current density operation of water-fed zero-gap carbon dioxide electrolysers10.1038/s41560-021-00813-w ↗
67. Intermittent use of a low-cost alkaline fuel cell-hybrid system for electric vehicles10.1016/S0378-7753(98)00261-4 ↗
68. Gas diffusion electrode of high performance10.1016/S0022-0728(84)80139-4 ↗
69. New preparation method of a high performance gas diffusion electrode working at 100% utilization of catalyst clusters and analysis of the reaction layer10.1016/0022-0728(86)80149-8 ↗
70. High-performance fuel cell with stretched catalyst-coated membrane: One-step formation of cracked electrode
71. Operando detection of oxygen reduction reaction kinetics of Fe–N–C catalysts in proton exchange membrane fuel cells10.1016/j.jpowsour.2022.231058 ↗
72. High performance cathode based on carbon fiber felt for magnesium-air fuel cells10.1016/j.ijhydene.2013.02.093 ↗
73. Asymmetric air cathode design for enhanced interfacial electrocatalytic reactions in high-performance zinc–air batteries10.1002/adma.201908488 ↗
74. In operando x-ray tomography for next-generation batteries: a systematic approach to monitor reaction product distribution and transport processes10.1088/0022-3727/49/40/404001 ↗
75. 3D imaging of catalyst support corrosion in polymer electrolyte fuel cells10.1021/jp203016u ↗
76. Characterization of carbon corrosion-induced structural damage of PEM fuel cell cathode electrodes caused by local fuel starvation10.1149/1.2956198 ↗
77. Four-dimensional joint visualization of electrode degradation and liquid water distribution inside operating polymer electrolyte fuel cells10.1038/s41598-018-38464-9 ↗
78. Correlative X-ray tomographic imaging of catalyst layer degradation in fuel cells10.1149/2.0121913jes ↗
79. Self-activated cathode substrates in rechargeable zinc–air batteries10.1016/j.ensm.2020.11.036 ↗
80. Analyzing transport paths in the air electrode of a zinc air battery using X-ray tomography10.1016/j.elecom.2014.01.001 ↗
81. A combined in-situ and post-mortem investigation on local permanent degradation in a direct methanol fuel cell10.1016/j.jpowsour.2015.11.105 ↗
82. High catalytic performance and stability of Pt/C using acetic acid functionalized carbon10.1016/j.jpowsour.2009.06.032 ↗
83. On the role of surface functional groups in Pt carbon interaction10.1007/BF00243330 ↗
84. Effect of carbon black support corrosion on the durability of Pt/C catalyst10.1016/j.jpowsour.2007.06.084 ↗
85. Stabilization of platinum oxygen-reduction electrocatalysts using gold clusters10.1126/science.1134569 ↗
86. A review of PEM fuel cell durability: materials degradation, local heterogeneities of aging and possible mitigation strategies
87. Electrochemical impedance spectroscopy of catalyst and carbon degradations in proton exchange membrane fuel cells10.1016/j.jpowsour.2019.226922 ↗
88. Raman spectroscopy of graphene: doping and mapping
89. Blinn · 2012
90. Raman spectroscopy of graphene and graphite: Disorder, electron–phonon coupling, doping and nonadiabatic effects10.1016/j.ssc.2007.03.052 ↗
91. A review of platinum-based catalyst layer degradation in proton exchange membrane fuel cells10.1016/j.jpowsour.2009.06.073 ↗
92. The performance and durability of high-temperature proton exchange membrane fuel cells enhanced by single-layer graphene
93. Application of TGA techniques to analyze the compositional and structural degradation of PEMFC MEAs10.1016/j.polymdegradstab.2012.03.016 ↗
94. Thermal stability in air of Pt/C catalysts and PEM fuel cell catalyst layers10.1021/cm052660e ↗
95. Polytetrafluoroethylene decomposition in air and nitrogen10.1002/pen.10908 ↗
96. Characterization of vulcan electrochemically oxidized under simulated PEM fuel cell conditions10.1149/1.1649756 ↗
97. Particle size effect on platinum dissolution: considerations for accelerated stability testing of fuel cell catalysts10.1021/acscatal.0c00779 ↗
98. Oxides supported carbon air-electrodes for alkaline solution power devices10.1016/0013-4686(85)80083-9 ↗
99. Design and investigation of dual-layer electrodes for proton exchange membrane fuel cells10.1016/j.ssi.2013.08.025 ↗
100. A Pt content and pore structure gradient distributed catalyst layer to improve the PEMFC performance10.1016/j.ijhydene.2016.11.002 ↗