journal article·2023-01

Considering solid phase diffusion penetration depth to improve profile approximations: Towards accurate State estimations in lithium-ion batteries at low characteristic diffusion lengths

Sagar Bharathraj, Shashishekar P. Adiga, K Subramanya Mayya, Tae-Won Song, Jin-Ho Kim

Publisher page

Abstract

Lithium-ion batteries are typically modelled using the pseudo-2-dimensional (P2D) model, where a set of partial differential equations describing transport and electrochemical reactions are solved numerically to obtain battery state information. To improve computational efficiency and enable on-board implementation for state-estimation, reduced order models are developed, where one such model reduction technique includes using a profile approximation for solving solid phase diffusion inside electrode particles. While greatly reducing model complexity, the profile approximation also leads to reduced accuracy, especially at low characteristic diffusion lengths. We address this issue by developing an improved model, which recognizes the existence of a penetration depth and the solution is obtained by dividing the particle into diffusion-free core and a shell corresponding to the penetration depth. The time-scale for the diffusion front to reach the particle centre depends on the diffusivity and particle radius. A similarity solution for this period, leads to an expression for the State of charge (SOC) in the spatio-temporal domain. The predictions are compared to that from the benchmark P2D and experimental data, revealing accuracies >99%, while adding no computational cost. This improved model is particularly useful under high C-rate or low temperature operation, where the characteristic diffusion lengths are low.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Advanced battery management strategies for a sustainable energy future: multi layer design concepts and research trends
2. Hariharan · 2018
3. Towards in-situ detection of nascent short circuits and accurate estimation of state of short in Lithium-Ion Batteries10.1016/j.jpowsour.2021.230830 ↗
4. Accessing the current limits in lithium ion batteries: analysis of propensity for unexpected power loss as a function of depth of discharge, temperature and pulse duration10.1016/j.jpowsour.2021.229723 ↗
5. Comparison of modeling predictions with experimental data from plastic lithium ion cells10.1149/1.1836921 ↗
6. Review of models for predicting the cycling performance of lithium ion batteries
7. Reduced order model for a lithium ion cell with uniform reaction rate approximation10.1016/j.jpowsour.2012.09.013 ↗
8. Baba · J. Power Sources · 2014 · 252
9. A nonlinear equivalent circuit model for lithium ion cells
10. Rapid analysis of charging profiles of lithium ion batteries using a hybrid simplified elecrochemical model10.1149/2.0061607jes ↗
11. A reduced order electrochemical thermal model for lithium ion cells10.1016/j.jpowsour.2015.04.179 ↗
12. On-board state estimation in electrical vehicles: achieving accuracy and computational efficiency through an electrochemical model10.1109/TVT.2020.2966266 ↗
13. Understanding particle-size-dependent electrochemical properties of Li2MnO3-based positive electrode materials for rechargeable lithium batteries10.1021/acs.jpcc.5b10517 ↗
14. Lithium diffusion study in Li 2 MnO 3 and Li 1.17 Ni 0.17 Mn 0.67 O 2 : a combined experimental and computational approach10.1039/C7CP06458F ↗
15. Degradation-guided optimization of charging protocol for cycle life enhancement of Li-ion batteries with Lithium Manganese Oxide-based cathodes10.1016/j.jpowsour.2020.228659 ↗
16. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell
17. Efficient macro-micro scale coupled modeling of batteries10.1149/1.2032427 ↗
18. An analytical solution to Li/Li+ insertion into a porous electrode
19. Efficient reformulation of solid-phase diffusion in physics based lithium-ion battery models10.1149/1.3425622 ↗
20. Model order reduction techniques for physics-based lithium-ion battery management: a survey10.1109/MIE.2021.3100318 ↗
21. Physics informed Li-ion cell parameter estimation using characteristic response isolation10.1016/j.est.2020.101962 ↗
22. Lithium-ion battery fast charging: a review10.1016/j.etran.2019.100011 ↗