Method for evaluating laser welding quality of battery module based on coupling model
Source abstract
Abstract
Since the existing commonly used welding quality detection techniques cannot effectively detect pseudo welding (PW) defects in the laser welding of a battery module, in this study, we first study a one-dimensional heat transfer model of the PW defects of welding spot. Then, we establish an electro-thermal coupling model of a lithium-ion battery (LIB) module. The voltage of the LIB with and without PW is simulated and analyzed. The influence of charge–discharge rates, and geometric shape of welding spot on the battery voltage is discussed in detail. The simulation results show that at the discharge rates of 5 C, 10 C and 15 C, the voltage of PW battery in the discharge stage is about 12 mV, 15 mV and 20 mV lower than that of the normal one respectively. And the effect of the geometric shape of welding spot on the battery voltage is negligible. Based on experimental data of discharge stage, the complete charge–discharge data are calculated using the electro-thermal coupling model, and the voltage Euclidean distance (VED) is proposed. The experimental results prove that the laser welding quality of module can be quickly and accurately detected based on the electro-thermal coupling model and solving the VED.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Thermography and Photoacoustic Techniques · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehicles10.1016/j.rser.2016.05.033 ↗
2. Welding techniques for battery cells and resulting electrical contact resistances10.1016/j.est.2015.04.001 ↗
3. Behavior and mechanism of void welding under thermal mechanical coupling10.1007/s12540-021-01055-x ↗
4. Experimental investigation of the influence of electrical contact resistance on lithium-ion battery testing for fast-charge applications10.1016/j.apenergy.2021.117064 ↗
5. Thermal runaway characteristics of a LiFePO4-based lithium-ion secondary battery using the laser-irradiation method10.1016/j.est.2021.102715 ↗
6. Defect inspection of flip chip solder joints based on non-destructive methods: A review10.1016/j.microrel.2020.113657 ↗
7. Non-destructive crack and defect detection in SAC solder interconnects using cross-sectioning and X-ray micro-CT
8. Soldering defect detection in automatic optical inspection10.1016/j.aei.2019.101004 ↗
9. Micro-nondestructive evaluation of microelectronics using three-dimensional acoustic imaging
10. A study on crack healing in 1045 steel10.1016/j.jmatprotec.2006.04.067 ↗
11. Defect detection of flip chip solder bumps with wavelet analysis of laser ultrasound signals10.1109/TADVP.2009.2034634 ↗
12. Quality inspection of micro solder joints in laser spot welding by laser ultrasonic method10.1016/j.ultras.2021.106567 ↗
13. Long pulse excitation thermographic non-destructive evaluation10.1016/j.ndteint.2017.01.003 ↗
14. Identification of butt welded joint penetration based on infrared thermal imaging10.1016/j.jmrt.2021.03.075 ↗
15. A new IC solder joint inspection method for an automatic optical inspection system based on an improved visual background extraction algorithm10.1109/TCPMT.2015.2501284 ↗
16. Failure assessment of mash seam weld breakage and development of online weld inspection system for early detection of weld failure10.1016/j.engfailanal.2021.105967 ↗
17. Application of neural networks in optical inspection and classification of solder joints in surface mount technology10.1109/TII.2006.877265 ↗
18. An effective method of weld defect detection and classification based on machine vision10.1109/TII.2019.2896357 ↗
19. An overview of the state of art in laser welding simulation10.1016/j.optlastec.2015.09.015 ↗
20. Residual stress analysis of laser spot welding of steel sheets10.1016/j.matdes.2009.03.041 ↗
21. Numerical simulation of the temperature field, weld profile, and weld pool dynamics in laser welding of aluminium alloy10.1016/j.ijleo.2021.167990 ↗
22. Analysis of influencing factors of heat conduction of virtual solder joint based on numerical simulation method
23. Numerical investigation on thermal management system for lithium ion battery using phase change material
24. Performance study on the effect of coolant inlet conditions for a 20 Ah LiFePO4 prismatic battery with commercial mini channel cold plates10.3390/electrochem3020018 ↗
25. Zhao · 2022
26. Modeling of SEI layer growth and electrochemical impedance spectroscopy response using a thermal-electrochemical model of Li-ion batteries10.1149/06127.0043ecst ↗
27. Optimizing battery design for fast charge through a genetic algorithm based multi-objective optimization framework10.1149/07711.0257ecst ↗
28. Phase-field modeling of solid electrolyte interphase (SEI) evolution: Considering cracking and dissolution during battery cycling10.1149/08901.0101ecst ↗
29. Modelling and characterisation of ultrasonic joints for Li-ion batteries to evaluate the impact on electrical resistance and temperature raise10.1016/j.est.2019.02.017 ↗
30. Electrochemical and thermal characteristics of prismatic lithium-ion battery based on a three-dimensional electrochemical-thermal coupled model10.1016/j.est.2021.102976 ↗
31. Simulation of cooling plate effect on a battery module with different channel arrangement10.1016/j.est.2022.104113 ↗
32. A 3D electrochemical-thermal coupled model for electrochemical and thermal analysis of pouch-type lithium-ion batteries10.1016/j.ijheatmasstransfer.2021.121855 ↗
33. Electrochemical thermal modeling and experimental measurements of 18650 cylindrical lithium-ion battery during discharge cycle for an EV10.1016/j.applthermaleng.2018.02.046 ↗
34. Toward safe and rapid battery charging: Design optimal fast charging strategies thorough a physics-based model considering lithium plating10.1002/er.5924 ↗
35. Parameter sensitivity analysis and cathode structure optimization of a non-aqueous Li–O2 battery model10.1016/j.jpowsour.2020.227821 ↗
36. Experimental and simulation study on thermal characteristics of 18,650 lithium–iron–phosphate battery with and without spot–welding tabs10.1016/j.applthermaleng.2019.114648 ↗