journal article·2019-11

Ideal benefits of exceeding fixed voltage limits on lithium-ion batteries with increasing cycle age

Lukas Wikander, Björn Fridholm, Sébastien Gros, Torsten Wik

Publisher page

Abstract

This work quantifies what can safely be gained in terms of charged energy by disregarding conventional fixed limits on lithium-ion cell terminal voltage and instead placing limits on side reaction overpotential. A high-fidelity lithium-ion battery cell model is subjected to a range of constant currents given a set of initial states of charge (SoC). With limits placed on side reaction overpotential, it is possible to safely charge additional energy into the cell after the voltage limit has been reached. The effects of cell ageing through solid electrolyte interphase build-up are included in the model and both a fresh cell and a 4000 cycles aged cell are thereby investigated. It is shown that limiting anode plating overpotential instead of terminal voltage results in a theoretical additional 6% of total cell energy capacity charged for a fresh cell and 4% for an aged cell. Furthermore, with low enough initial SoC a 10C current is safe for five to ten seconds after exceeding the cell voltage limit depending on cell age. When evaluated on a city bus drive cycle, use of plating overpotential limits over voltage limits is shown to enable additional recovery of 2.5-14% of traction energy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Implementation and robustness of an analytically based battery state of power10.1016/j.jpowsour.2015.03.165 ↗
2. Electrochemical estimation and control for lithium-ion battery health-aware fast charging10.1109/TIE.2017.2772154 ↗
3. Model-based electrochemical estimation and constraint management for pulse operation of lithium ion batteries10.1109/TCST.2009.2027023 ↗
4. Lithium-ion battery thermal-electrochemical model-based state estimation using orthogonal collocation and a modified extended kalman filter10.1016/j.jpowsour.2015.07.019 ↗
5. Adaptive partial differential equation observer for battery state-of-charge/state-of-health estimation via an electrochemical model10.1115/1.4024801 ↗
6. On-line adaptive battery impedance parameter and state estimation considering physical principles in reduced-order equivalent circuit battery models10.1016/j.jpowsour.2014.01.129 ↗
7. Algorithms for advanced battery-management systems - modeling, estimation and control challenges for lithium-ion batteries
8. Optimal charging strategies in lithium-ion battery
9. Battery-health conscious power management in plug-in hybrid electric vehicles via electrochemical modeling and stochastic control10.1109/TCST.2012.2189773 ↗
10. Lionsimba: a matlab framework based on a finite volume model suitable for li-ion battery design, simulation, and control10.1149/2.0291607jes ↗
11. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
12. Newman · 2004
13. Simulation and optimization of the dual lithium ion insertion cell10.1149/1.2054684 ↗
14. The use of mathematical modeling in the design of lithium/polymer battery systems10.1016/0013-4686(95)00162-8 ↗
15. Multistage mechanism of lithium intercalation into graphite anodes in the presence of the solid electrolyte interface10.1021/acsami.7b18738 ↗
16. Ageing mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.01.006 ↗
17. Effect of electrolyte transport properties and variations in the morphological parameters on the variation of side reaction rate across the anode electrode and the aging of lithium ion batteries10.1016/j.jpowsour.2011.07.026 ↗
18. Wikner · 2017
19. Modeling of lithium plating induced aging of lithium-ion batteries - transition from linear to nonlinear aging10.1016/j.jpowsour.2017.05.110 ↗
20. Mathematical modeling of the lithium deposition overcharge reaction in lithium-ion batteries using carbon-based negative electrodes10.1149/1.1392512 ↗