Tailoring the morphology of orthorhombic Li2MnSiO4 by carbon additive and its impact on transport and Li-storage properties
Source abstract
Abstract
Carbon additive is an exciting approach for tailoring the surface morphology and improving the material`s structural stability, electrical conductivity, and interface chemistry for achieving high capacity and long cycling stability simultaneously. Herein, we successfully introduce sucrose as a carbon additive to tailor the morphology of Li 2MnSiO 4 (LMS). The low-temperature hydrothermal synthesis route is adopted for preparing pure phase LMS/C x (x = 0, 2, 5, 7, and 10 wt % refereed as PLMS, LMSC2, LMSC5, LMSC7 and LMSC10). FE-SEM and HR-TEM analyses are used to monitor the changes in the morphology of LMS/C x composites. The one-dimensional nanorods (formed by the addition of carbon additives) embedded in the as-synthesized best composite sample (LMSC7) are found responsible for the fast lithium-ion diffusion, reactivity, and enhancing the electronic conduction from 26% to 67%, almost three times higher than PLMS. The electronic conductivity of LMSC7 is calculated to be 3.93 × 10 −8 (±0.001) Scm −1. It also exhibits an initial charge capacity of 240 (±5) mAhg −1, which is found to be ∼66% higher than PLMS (90 ± 5) at 10 mAg −1 current density at ambient temperature. Furthermore, after a few early cycles, the cyclability profile of LMSC7 demonstrates excellent 100% coulombic efficiency.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Dielectric properties of ceramics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Modification of Li2MnSiO4 cathode materials for lithium-ion batteries: a review10.1039/C7TA00034K ↗
2. Advances in high-capacity Li2MSiO4 (M = Mn, Fe, Co, Ni, ⋯) cathode materials for lithium-ion batteries10.1039/C5RA18594G ↗
3. Recent progress in the development of Li2MnSiO4 cathode materials10.1016/j.jpowsour.2013.11.082 ↗
4. Defect chemistry and lithium-ion migration in polymorphs of the cathode material Li2MnSiO410.1039/c3ta00111c ↗
5. Vanadium substitution in Li2MnSiO4/C as positive electrode for Li ion batteries10.1021/acs.jpcc.6b01831 ↗
6. Chelate-induced formation of Li2MnSiO4 nanorods as a high-capacity cathode material for Li-ion batteries10.1039/C6TA01269H ↗
7. Facile and one-step in situ synthesis of pure phase mesoporous Li2MnSiO4/CNTs nanocomposite for hybrid supercapacitors10.1021/acsaem.9b02118 ↗
8. Sol-gel derived nanostructured Li2MnSiO4/C cathode with high storage capacity10.1016/j.electacta.2013.04.009 ↗
9. Controlled synthesis of nanocrystalline Li2MnSiO4 particles for high-capacity cathode application in lithium-ion batteries10.1039/c2cc17234h ↗
10. Effect of sulfur doping on structural reversibility and cycling stability of a Li2MnSiO4 cathode material10.1039/C8DT02226G ↗
11. Effect of Ni substitution on structural stability, micromorphology, and electrochemical performance of Li2MnSiO4/C cathode materials10.1039/C6RA22357E ↗
12. Highly enhancement of the SiOx nanocomposite through Ti-doping and carbon-coating for high-performance Li-ion battery10.1016/j.jpowsour.2018.08.065 ↗
13. Adipic acid assisted sol-gel synthesis of Li2MnSiO4 nanoparticles with improved lithium storage properties10.1039/c0jm01635g ↗
14. Microwave-solvothermal synthesis of nanostructured Li2MSiO4/C (M = Mn and Fe) cathodes for lithium-ion batteries10.1021/cm102058n ↗
15. Template-assisted hydrothermal synthesis of Li2MnSiO4 as a cathode material for lithium-ion batteries10.1021/acsami.5b01061 ↗
16. Improving electrochemical properties and structural stability of lithium manganese silicates as cathode materials for lithium-ion batteries via introducing lithium excess10.1002/er.4932 ↗
17. Insights into the enhanced electrochemical performance of Mn-deficiency Li2Mn(1-x)SiO4/C for Li-ion batteries: experimental and theoretical study10.1016/j.jpowsour.2019.02.067 ↗
18. Dual-site magnesium doping in Li2MnSiO4/C/rGO cathode material for lithium-ion batteries10.1016/j.ssi.2019.05.004 ↗
19. Nanostructured Li2MnSiO4/C cathodes with hierarchical macro-/mesoporosity for lithium-ion batteries10.1002/adfm.201400610 ↗
20. Understanding the improved kinetics and cyclability of a Li2MnSiO4 cathode with calcium substitution10.1021/acs.inorgchem.7b03257 ↗
21. Impacts of in situ carbon coating on the structural, morphological and electrochemical characteristics of Li2MnSiO4 prepared by a citric acid assisted sol–gel method10.1016/j.jelechem.2012.11.028 ↗
22. Role of impurity phases presents in orthorhombic-Li2MnSiO4 towards the Li-reactivity and storage as LIB cathode10.1016/j.apsusc.2021.151689 ↗
23. R factors in Rietveld analysis: how good is good enough?10.1154/1.2179804 ↗
24. Enhanced electrochemical properties of F-doped Li2MnSiO4/C for lithium-ion batteries10.1016/j.jpowsour.2017.12.004 ↗
25. Effect of carbon concentration on changing the morphology of titanium carbide nanoparticles from cubic to cuboctahedron10.1021/nn9010413 ↗
26. Coconut-based activated carbon fibers for efficient adsorption of various organic dyes10.1039/C8RA08990F ↗
27. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
28. Facile electrochemical activity of monoclinic Li2MnSiO4 as potential cathode for Li-ion batteries10.1021/acsami.9b08213 ↗
29. Morphology and oxygen defects mediated improved pseudocapacitive Li+ storage of conversion-based lithium iron oxide10.1021/acs.energyfuels.1c01434 ↗
30. CoMn2O4 nanoparticles decorated on 2D MoS2 frame: a synergetic energy storage composite material for practical supercapacitor applications10.1016/j.est.2021.102302 ↗
31. Facile synthesis of mesoporous NiFe2O4/CNTs nanocomposite cathode material for high performance asymmetric pseudocapacitors10.1016/j.apsusc.2017.10.095 ↗
32. Synthesis and structural stability of Cr-doped Li2MnSiO4/C cathode materials by solid-state method10.1016/j.apsusc.2017.10.045 ↗
33. Effect of surface carbon structure on the electrochemical performance of LiFePO410.1149/1.1601372 ↗
34. Tailoring the transport and magnetic properties of Mn doped spinel FeCo2O4 and their impact on energy storage properties: a new strategy to improve storage performance10.1016/j.est.2021.103361 ↗
35. Template synthesis of mesoporous Li2MnSiO4 @C composite with improved lithium storage properties10.1016/j.electacta.2018.08.146 ↗
36. Interfacial strategies for suppression of Mn dissolution in rechargeable battery cathode materials
37. Nucleation-dissolution-recrystallization: a new growth mechanism for t-selenium nanotubes10.1021/cg050444c ↗
38. Electrochemical performances of Li-rich layered-layered Li2MnO3-LiMnO2 solid solutions as cathode material for lithium-ion batteries10.1016/j.jallcom.2016.11.199 ↗
39. Facile electrochemical activity of monoclinic Li2MnSiO4 as potential cathode for Li-ion batteries10.1021/acsami.9b08213 ↗
40. Multi-ion strategies towards emerging rechargeable batteries with high performance10.1016/j.ensm.2019.03.028 ↗
41. Effect of Ni substitution on structural stability, micromorphology, and electrochemical performance of Li2MnSiO4/C cathode materials10.1039/C6RA22357E ↗
42. Ordered mesoporous α-MoO3 with iso-oriented nanocrystalline walls for thin-film pseudocapacitors10.1038/nmat2612 ↗
43. High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance10.1038/nmat3601 ↗