journal article·2020-06

Improvement of the electrochemical performance by partial chemical substitution into the lithium site of titanium phosphate-based electrode materials for lithium-ion batteries: LiNi0.25Ti1.5 Fe0.5(PO4)3

Mohammed Srout, Mario El Kazzi, Hicham Ben Youcef, Katharina M. Fromm, Ismael Saadoune

Publisher page

Abstract

Abstract Partial lithium substitution with nickel (0.25 of Ni2+ ion) in the previously reported Li1.5Fe0.5Ti1.5(PO4)3/C (LFTP@C) was performed to improve its structural and electrochemical properties. The new LiNi0.25Fe0.5Ti1.5(PO4)3/C (LNFTP@C) material was then tested as electrode for lithium ion batteries. In the voltage window 1.85V–3.0 V vs. Li+/Li, attractive electrochemical performances were obtained, mostly in terms of rate capability performance. At a current rate of 0.1C (6.6 mAg−1), the material delivered a capacity of around 120 mAhg−1, while at 5C, we observed a slight drop of the specific capacity reaching a value of 108 mAhg−1. Long-term cycling performance stability was also tested demonstrating a remarkable capacity decrease during the last 500 cycles. The capacity retention decreased from 94% to 91% after 500 cycles to about 77% and 74% after 1000 cycles at fast current rates of 5C (329.8 mAg−1) and 10C (659.6 mAg−1), respectively. In the wider voltage window, an average specific capacity of around 380 mAhg−1 was attained at a slow current rate of 0.1C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Energy storage in the energy transition context: a technology review10.1016/j.rser.2016.07.028 ↗
2. Classification and assessment of energy storage systems10.1016/j.rser.2016.11.102 ↗
3. Lithium batteries and cathode materials10.1021/cr020731c ↗
4. Lithium-ion batteries. A look into the future10.1039/c1ee01388b ↗
5. Energy storage devices for future hybrid electric vehicles10.1016/j.jpowsour.2006.10.090 ↗
6. A review on the key issues for lithium-ion battery management in electric vehicles10.1016/j.jpowsour.2012.10.060 ↗
7. The lithium-ion battery: state of the art and future perspectives10.1016/j.rser.2018.03.002 ↗
8. Carbon coated Fe3O4 nanospindles as a superior anode material for lithium-ion batteries10.1002/adfm.200801386 ↗
9. Electrochemical and structural investigation of calcium substituted monoclinic Li3V2(PO4)3 anode materials for Li‐ion batteries10.1002/aenm.201901864 ↗
10. NASICON-type Mg0.5Ti2(PO4)3 negative electrode material exhibits different electrochemical energy storage mechanisms in Na-ion and Li-ion batteries
11. New Ni0.5Ti2(PO4)3@C NASICON‐type electrode material with high rate capability performance for lithium‐ion batteries: synthesis and electrochemical properties10.1002/cssc.201902002 ↗
12. LiTi2(PO4)3 with NASICON-type structure as lithium-storage materials10.1016/S0378-7753(03)00609-8 ↗
13. Li3V2(PO4)3/C composite as an intercalation-type anode material for lithium-ion batteries10.1016/j.jpowsour.2010.09.024 ↗
14. Carbon-coated LiTi2(PO4 )3 : an ideal insertion host for lithium-ion and sodium-ion batteries10.1002/asia.201301461 ↗
15. Extensive lithium disorder in Li1.5Fe0.5Ti1.5(PO4)3 Nasicon by neutron diffraction, and the Li1+xFexTi2−x(PO4)3 phase diagram10.1039/B312865B ↗
16. Understanding of the Li-insertion process in a phosphate based electrode material for lithium ion batteries10.1016/j.jpowsour.2019.226803 ↗
17. Utmost limits of various solid electrolytes in all-solid-state lithium batteries: a critical review10.1016/j.rser.2019.04.035 ↗
18. A profile refinement method for nuclear and magnetic structures10.1107/S0021889869006558 ↗
19. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
20. Adsorption of gases in multimolecular layers10.1021/ja01269a023 ↗
21. Mechanisms and performances of Na1.5Fe0.5Ti1.5(PO4)3/C composite as electrode material for Na-ion batteries10.1021/acs.jpcc.5b07931 ↗
22. Lithium ion conduction in LiTi2(PO4)3 and related compounds based on the NASICON structure: a first-principles study10.1021/acs.chemmater.5b01582 ↗
23. On cationic mobility in Nasicon phosphates LiTi2(PO4)3 and Li0.9Ti1.9Nb0.1(PO4)310.1016/j.ssi.2012.01.035 ↗
24. Polyanionic (phosphates, silicates, sulfates) frameworks as electrode materials for rechargeable Li (or Na) batteries10.1021/cr3001862 ↗
25. Synthesis, characterization and application of Li3Fe2(PO4)3 nanoparticles as cathode of lithium-ion rechargeable batteries10.1016/j.jpowsour.2011.03.079 ↗