High performance fuel electrodes fabricated by electroless plating of copper on BaZr 0.8 Ce 0.1 Y 0.1 O 3-δ proton-conducting ceramic
Source abstract
Abstract
Abstract The stability of copper at high temperatures in reducing and hydrocarbon-containing atmospheres makes it a good candidate for fabricating fuel electrodes on proton-conducting ceramics, such as BaZr 0.9-x Ce x Y 0.1 O 3-δ (BZCY). In this work, the electrochemical performance of Cu-based electrodes fabricated by electroless plating (ELP) on BaZr 0.8 Ce 0.1 Y 0.1 O 3-δ is studied with impedance spectroscopy. Three activation catalysts (Pd, Ru, and Cu) are investigated and ELP is compared to a commercial Cu paste (ESL 2312-G) for electrode fabrication. The area specific resistances (ASR) for Pd, Ru, and Cu activations at 700 °C in moist 5% H 2 in Ar are 2.1, 3.2, and 13.4 Ω cm 2 , respectively. That is a 1–2 orders of magnitude improvement over the commercial Cu paste (192 Ω cm 2 ). Furthermore, the ASR has contributions from electrode processes and charge transfer at the electrode/electrolyte interface. Additionally, the morphology of the as-fabricated electrode is unaffected by the activation catalyst. However, heat treatment at 750 °C in H 2 for 24 h leads to sintering and large reorganization of the electrode fabricated with Cu activation (micron sized pores seen in the tested sample), while Pd and Ru activations are immune to such reorganization. Thus, Pd and Ru are identified as candidates for future work with improvements to charge transfer required for the former, and better electrode processes required for the latter.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Performance of solid oxide fuel cell using proton and oxide ion mixed conductors based on BaCe1 − xSmxO3 − α10.1149/1.2221624 ↗
2. Characterization of Gd, Yb and Nd doped barium cerates as proton conductors10.1016/0167-2738(93)90383-E ↗
3. Characterisation and permeation of palladium/stainless steel composite membranes10.1016/S0376-7388(98)00192-6 ↗
4. Protonic conduction in Zr-substituted BaCeO310.1016/S0167-2738(00)00777-3 ↗
5. Proton conduction at the surface of Y-Doped BaCeO310.1021/jp0124342 ↗
6. Relation between electrical conductivity and chemical stability of BaCeO3-based proton conductors with different trivalent dopants10.1149/1.2458743 ↗
7. Stability and electric conductivity of barium cerate perovskites co-doped with praseodymium10.2174/1876973X00801010007 ↗
8. Tailoring the chemical stability of Ba(Ce0.8 − xZrx)Y0.2O3 − δ protonic conductors for intermediate temperature solid oxide fuel cells (IT-SOFCs)10.1016/j.ssi.2008.04.002 ↗
9. Defect structure analysis of B-site doped perovskite-type proton conducting oxide BaCeO3: Part 2: the electrical conductivity and diffusion coefficient of BaCe0.9Y0.1O3 − δ10.1016/j.ssi.2008.08.005 ↗
10. Synthesis of strontium and barium cerate and their reaction with carbon dioxide10.1016/0167-2738(93)90338-4 ↗
11. Chemical stability study of BaCe0.9Nd0.1O 3-α high-temperature proton-conducting ceramic10.1039/a605377g ↗
12. Stability of BaCeO3-based proton conductors in water-containing atmospheres10.1149/1.1391888 ↗
13. Non-stoichiometry, grain boundary transport and chemical stability of proton conducting perovskites10.1023/A:1004877708871 ↗
14. Elaboration of CO2 tolerance limits of BaCe0.9Y0.1O3–δ electrolytes for fuel cells and other applications10.1016/j.ssi.2005.09.040 ↗
15. Endurance against moisture for protonic conductors of perovskite-type ceramics and preparation of practical conductors10.1016/S0167-2738(01)00930-4 ↗
16. The influence of cation non-stoichiometry on the properties of undoped and gadolinia-doped barium cerate10.1016/S0167-2738(97)00029-5 ↗
17. Proton conductivity and phase composition in BaZr0.9Y0.1O3−δ10.1016/j.scriptamat.2003.11.028 ↗
18. Proton-conducting oxides10.1146/annurev.matsci.33.022802.091825 ↗
19. Transport in proton conductors for fuel-cell Applications: simulations, elementary reactions, and phenomenology10.1021/cr020715f ↗
20. Conductivity study of dense BaCexZr(0.9−x)Y0.1O(3−δ) prepared by solid state reactive sintering at 1500 °C10.1016/j.ijhydene.2011.08.118 ↗
21. Ba(Zr0.1Ce0.7Y0.2)O3–δ as an electrolyte for low-temperature solid-oxide fuel cells10.1002/adma.200601366 ↗
22. Synthesis, stability and conductivity of BaCe0.8-xZrxY0.2O3−δ as electrolyte for proton conducting SOFC10.1016/j.ijhydene.2011.04.106 ↗
23. Zirconium doping effect on the performance of proton-conducting BaZryCe0.8-yY0.2O3−δ (0.0 ≤ y ≤ 0.8) for fuel cell applications10.1016/j.jpowsour.2009.03.044 ↗
24. Water vapour solubility and conductivity study of the proton conductor BaCe(0.9 −x)ZrxY0.1O(3 − δ)10.1016/j.ssi.2009.03.016 ↗
25. High conductivity and chemical stability of BaCe1−x−yZrxYyO3−δ proton conductors prepared by a sol–gel method10.1039/b808344d ↗
26. Synthesis and conductivity of Ba(Ce,Zr,Y)O3−δ electrolytes for PCFCs by new nitrate-free combustion method10.1016/j.ijhydene.2013.04.078 ↗
27. Exploring electronic conduction through BaCexZr0.9−xY0.1O3−d proton-conducting ceramics10.1016/j.ssi.2016.01.029 ↗
28. Characterization of ionic transport through BaCe0.2Zr0.7Y0.1O3−δ membranes in galvanic and electrolytic operation10.1016/j.ijhydene.2015.05.162 ↗
29. A stoichiometric titration method for measuring galvanic hydrogen flux in ceramic hydrogen separation membranes10.1016/j.memsci.2014.01.071 ↗
30. Galvanic hydrogen pumping in the protonic ceramic perovskite10.1016/j.memsci.2013.06.026 ↗
31. Co-ionic conduction in protonic ceramics of the solid solution, BaCe(x)Zr(y-x)Y(1-y)O3-δ Part I: fabrication and microstructure
32. Cost-effective solid-state reactive sintering method for high conductivity proton conducting yttrium-doped barium zirconium ceramics10.1016/j.ssi.2010.02.008 ↗
33. Catalytic conversion of methane to more useful chemicals and fuels: a challenge for the 21st century10.1016/S0920-5861(00)00456-9 ↗
34. Unconventional chemistry for unconventional natural gas10.1126/science.1226840 ↗
35. Evaluation of utilization alternatives for stranded natural gas10.1016/j.energy.2012.01.068 ↗
36. Carbonaceous deposition on Mo/HMCM-22 catalysts for methane aromatization: a TP technique investigation10.1006/jcat.2002.3540 ↗
37. Direct conversion of methane under nonoxidative conditions10.1016/S0021-9517(02)00124-0 ↗
38. Catalytic aromatization of methane10.1039/C3CS60259A ↗
39. Efficient conversion of methane to aromatics by coupling methylation reaction10.1021/acscatal.6b01362 ↗
40. Catalytic chemistry for methane dehydroaromatization (MDA) on a bifunctional Mo/HZSM-5 catalyst in a packed bed10.1021/acs.iecr.6b02701 ↗
41. Direct conversion of methane to aromatics in a catalytic co-ionic membrane reactor10.1126/science.aag0274 ↗
42. Fabrication of reducing atmosphere electrodes (fuel electrodes) by electroless plating of copper on BaZr 0.9 − x Ce x Y 0.1 O 3 − δ – a proton-conducting ceramic10.1016/j.ijhydene.2017.06.029 ↗
43. Streicher Johann · 1953
44. A new preparation technique for Pd alumina membranes with enhanced high-temperature stability10.1021/ie980199c ↗
45. Scanning electron microscopy and X-ray microanalysis. A text for biologists
46. Rapid annealing of sequentially plated Pd-Au composite membranes using high pressure hydrogen10.1016/j.memsci.2016.04.034 ↗
47. Interpreting equilibrium-conductivity and conductivity-relaxation measurements to establish thermodynamic and transport properties for multiple charged defect conducting ceramics10.1039/C5FD00012B ↗
48. Fabrication of yttrium-doped barium zirconate for high performance protonic ceramic membranes
49. Double perovskite Ba2FeMoO6−δ as fuel electrode for protonic-ceramic membranes10.1016/j.ssi.2017.04.007 ↗
50. BaZr0.8Y0.2O3- δ-NiO composite anodic powders for proton-conducting SOFCs prepared by a combustion method10.1149/1.3591040 ↗
51. A wet-chemical route for the preparation of Ni–BaCe0.9Y0.1O3 − δ cermet anodes for IT-SOFCs10.1016/j.ssi.2009.03.005 ↗
52. Synthesis and characterisation of Ni–SrCe0.9Yb0.1O3−δ cermet anodes for protonic ceramic fuel cells10.1016/S0167-2738(02)00904-9 ↗
53. Hydrogen membrane separation techniques10.1021/ie050644l ↗
54. Membrane reactor application to hydrogen production10.1016/S0920-5861(99)00256-4 ↗
55. Electroceramics: characterization by impedance spectroscopy10.1002/adma.19900020304 ↗
56. Barsoukov · 2005
57. Steward · 1983
58. Loslichkeit und diffusionsgeschwindigkeit von wasserstoff und deuterium in einkristallen aus nickel und kupfer
59. Reiter · 1993
60. Interaction of copper alloys with hydrogen
61. Inhibition of hydrogen flux in palladium membranes by pressure–induced restructuring of the membrane surface10.1016/j.memsci.2017.04.025 ↗
62. Electroless plating synthesis, characterization and permeation properties of Pd–Cu membranes supported on ZrO2 modified porous stainless steel10.1016/j.memsci.2005.04.050 ↗
63. Cu-Ru Binary Phase Diagram Evaluation - Springer Materials, (n.d.). http://materials.springer.com/msi/docs/sm_msi_r_20_035126_01.
64. Zener pinning
65. The solubility of hydrogen in rhodium, ruthenium, iridium and nickel10.1016/0001-6160(73)90001-1 ↗
66. The ruthenium-palladium system10.1595/003214060X43104110 ↗
67. Kinetics of hydrogen desorption from palladium and ruthenium-palladium foils10.1557/JMR.1995.0779 ↗
68. Protons crossing triple phase boundaries based on a metal catalyst, Pd or Ni, and barium zirconate10.1039/c3cp51863a ↗
69. Properties of electroless Cu films optimized for horizontal plating as a function of deposit thickness10.1016/j.mee.2015.05.003 ↗
70. Tammann · 1929
71. 351. Properties of some simple oxides and spinels at high temperatures10.1039/jr9480001729 ↗
72. Identification of thermally stable Pd-alloy composite membranes for high temperature applications10.1016/j.memsci.2014.04.029 ↗
73. Cu-Pd (copper-palladium)10.1007/BF02645723 ↗
74. Massalski · 1990