The influence of microstructure and functional-grading on the electrochemical response of Pt/Yttria-stabilized zirconia nanocomposite thin films in micro-solid oxide fuel cells
Source abstract
Abstract
Abstract The use of microfabricated solid oxide fuel cells (mSOFCs) is a promising technology for a low temperature operation (as low as 300 °C) with reduced start-up time and improved energy density. However, one of the limitations to widespread adoption of this technology has been due to the use of Pt electrodes, which exhibit poor bulk ionic conductivity and suffers from Ostwald ripening. Pt/YSZ is a promising alternative for providing both microstructural and electrochemical stability to the electrode layer. The objective of this research is to investigate the electrochemical performance and long term morphological stability of Pt/YSZ, by tailoring the composition, porosity, thickness, and functional-graded distribution, for use as a high performance mSOFC cathode. The Pt/YSZ cathodes were deposited through a co-sputtering process. An increase in the oxygen reduction reaction (ORR) charge transfer kinetics are observed with the Pt/YSZ cathode versus pure Pt, along with a significantly more stable morphology over a 24hr period. Although the mSOFC performance is found to be sensitive to Pt/YSZ composition at the TPB interface, the mass diffusion of oxygen through the cathode is determined to be the rate limiting step. The increased porosity in the Pt/YSZ led to more efficient oxygen diffusion and higher mSOFC performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Pt/Y0.16Zr0.84O1.92/Pt thin film solid oxide fuel cells: electrode microstructure and stability considerations10.1016/j.jpowsour.2010.10.068 ↗
2. Micro solid oxide fuel cells on glass ceramic substrates10.1002/adfm.200700505 ↗
3. High-performance ultrathin solid oxide fuel cells for low-temperature operation10.1149/1.2372592 ↗
4. Atomic layer deposition of yttria-stabilized zirconia for solid oxide fuel cells10.1021/cm070913t ↗
5. Solid oxide fuel cell with corrugated thin film electrolyte10.1021/nl800977z ↗
6. Fuel cell materials and components10.1016/j.actamat.2003.08.004 ↗
7. An experimental investigation into micro-fabricated solid oxide fuel cells with ultra-thin La0.6Sr0.4Co0.8Fe0.2O3 cathodes and yttria-doped zirconia electrolyte films10.1016/j.jpowsour.2008.10.021 ↗
8. Investigation of nanoporous platinum thin films fabricated by reactive sputtering: application as micro-SOFC electrode10.1016/j.jpowsour.2014.11.084 ↗
9. Review on microfabricated micro-solid oxide fuel cell membranes10.1016/j.jpowsour.2009.03.048 ↗
10. Platinum-based nanocomposite electrodes for low-temperature solid oxide fuel cells with extended lifetime10.1016/j.jpowsour.2015.12.089 ↗
11. Thermal stabilities of nanoporous metallic electrodes at elevated temperatures10.1016/j.jpowsour.2007.09.066 ↗
12. Intermediate-temperature ceramic fuel cells with thin film yttrium-doped barium zirconate electrolytes10.1021/cm900820p ↗
13. Deposition and characterizations of Pt/YSZ nanocomposite thin films for micro-SOFCs10.1149/1.3701343 ↗
14. Experimental study of single triple-phase-boundary and platinum–yttria stabilized zirconia composite as cathodes for micro-solid oxide fuel cells10.1016/j.jpowsour.2012.01.113 ↗
15. Hillock growth and stress relief in sputtered Au films10.1063/1.1657067 ↗
16. Initial development of the lateral hillock distribution in optical quality A1 thin films studied in real time10.1016/S0040-6090(97)00315-5 ↗
17. Strain-induced coarsening in nano-grained films10.1016/j.tsf.2006.01.052 ↗
18. Stress distribution and hillock formation in Au/Pd thin films as a function of aging treatment in capacitor applications10.1016/j.apsusc.2009.06.077 ↗
19. Surface-energy-driven secondary grain growth in thin Au films10.1063/1.96543 ↗
20. Surface morphological Evolution of thin films under stress and capillary forces10.1023/A:1011231131878 ↗
21. Time-dependent analysis of agglomerating Pt thin films on YSZ single crystals10.1016/j.crhy.2013.06.007 ↗
22. Characterization of porous Pt films deposited via sputtering10.1016/j.apsusc.2013.05.153 ↗
23. Electrical resistivity and morphology of ultra thin Pt films grown by dc magnetron sputtering on SiO2
24. Growth, coalescence, and electrical resistivity of thin Pt films grown by dc magnetron sputtering on SiO210.1016/j.apsusc.2008.05.335 ↗
25. Influence of magnetron sputtering deposition conditions and thermal treatment on properties of platinum thin films for positive electrode–electrolyte–negative electrode structure10.1016/j.tsf.2015.10.016 ↗
26. Microstructure of thin film platinum electrodes on yttrium stabilized zirconia prepared by sputter deposition10.1016/j.tsf.2011.06.018 ↗
27. Investigation of nanoporous platinum thin films fabricated by reactive sputtering: application as micro-SOFC electrode10.1016/j.jpowsour.2014.11.084 ↗
28. Characteristics of cathodic polarization at Pt/YSZ interface without the effect of electrode microstructure10.1016/S0378-7753(02)00720-6 ↗
29. Evaluation of activation energy (Ea) profiles of nanostructured alumina polycarbonate composite insulation materials