journal article·2016-07

Development of a benchmarking model for lithium battery electrodes

Timm Bergholz, Carsten Korte, Detlef Stolten

Publisher page

Abstract

Abstract This paper presents a benchmarking model to enable systematic selection of anode and cathode materials for lithium batteries in stationary applications, hybrid and battery electric vehicles. The model incorporates parameters for energy density, power density, safety, lifetime, costs and raw materials. Combinations of carbon anodes, Li 4 Ti 5 O 12 or TiO 2 with LiFePO 4 cathodes comprise interesting combinations for application in hybrid power trains. Higher cost and raw material prioritization of stationary applications hinders the breakthrough of Li 4 Ti 5 O 12 , while a combination of TiO 2 and LiFePO 4 is suggested. The favored combinations resemble state-of-the-art materials, whereas novel cell chemistries must be optimized for cells in battery electric vehicles. In contrast to actual research efforts, sulfur as a cathode material is excluded due to its low volumetric energy density and its known lifetime and safety issues. Lithium as anode materials is discarded due to safety issues linked to electrode melting and dendrite formation. A high capacity composite Li 2 MnO 3 ·LiNi 0.5 Co 0.5 O 2 and high voltage spinel LiNi 0.5 Mn 1.5 O 4 cathode with silicon as anode material promise high energy densities with sufficient lifetime and safety properties if electrochemical and thermal stabilization of the electrolyte/electrode interfaces and bulk materials is achieved. The model allows a systematic top-down orientation of research on lithium batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. Energy storage devices for future hybrid electric vehicles10.1016/j.jpowsour.2006.10.090 ↗
2. A comparison of high-speed flywheels, batteries, and ultracapacitors on the bases of cost and fuel economy as the energy storage system in a fuel cell based hybrid electric vehicle10.1016/j.jpowsour.2010.08.100 ↗
3. Characteristics of electrical energy storage technologies and their applications in buildings10.1016/j.rser.2013.05.023 ↗
4. Wakabayashi · 2011
5. Howell · 2011
6. Results of a 20,000 h Lifetime test of a 7 kW Direct methanol fuel cell (DMFC) hybrid system - degradation of the DMFC stack and the energy storage
7. Camp · 1994
8. Who will drive electric vehicles, olivine or spinel?10.1039/c0ee00559b ↗
9. Precision measurements of the Coulombic efficiency of lithium-ion batteries and of electrode materials for lithium-ion batteries10.1149/1.3268129 ↗
10. Gaines · 2000
11. Lithium fiber growth on the anode in a nanowire lithium ion battery during charging10.1063/1.3585655 ↗
12. Carbon−Silicon Core−Shell nanowires as high capacity electrode for lithium ion batteries10.1021/nl901670t ↗
13. High-performance lithium-ion anodes using a hierarchical bottom-up approach10.1038/nmat2725 ↗
14. Enhanced electrochemical performance of silicon-based anode material by using current collector with modified surface morphology10.1016/j.electacta.2008.01.050 ↗
15. Improved electrochemical performance of Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode material by fluorine incorporation10.1016/j.electacta.2013.04.150 ↗
16. Lithium–manganese–nickel-oxide electrodes with integrated layered–spinel structures for lithium batteries10.1016/j.elecom.2006.09.014 ↗
17. Charge/discharge behavior of Li[Ni0.20Li0.20Mn0.60]O2 and Li[Co0.20Li0.27Mn0.53]O2 cathode materials in lithium secondary batteries10.1016/j.ssi.2005.02.006 ↗
18. A review of conduction phenomena in Li-ion batteries10.1016/j.jpowsour.2010.06.060 ↗
19. Mehrer · 2007
20. Olivine-type nanosheets for lithium ion battery cathodes10.1021/nn4022263 ↗
21. Cycle life modeling of lithium-ion batteries10.1149/1.1787631 ↗
22. Nonaqueous liquid electrolytes for lithium-based rechargeable batteries10.1021/cr030203g ↗
23. A short review on surface chemical aspects of Li batteries: a key for a good performance10.1016/j.jpowsour.2008.09.084 ↗
24. Impedance study on the electrochemical lithium intercalation into natural graphite powder10.1149/1.1838231 ↗
25. Abuse behavior of high-power, lithium-ion cells10.1016/S0378-7753(02)00488-3 ↗
26. Review and recent advances in battery health monitoring and prognostics technologies for electric vehicle (EV) safety and mobility10.1016/j.jpowsour.2014.01.085 ↗
27. On the thermal stability of olivine cathode materials for lithium-ion batteries10.1149/1.3622849 ↗
28. Thermal behavior investigation of LiNi1/3Co1/3Mn1/3O2 based Li ion battery under overcharged test10.1002/cjoc.201190056 ↗
29. High rechargeable Li-S cells for EV application. Status, remainig problems and solutions10.1149/1.3414001 ↗
30. Capacity fade mechanisms and side reactions in lithium-ion batteries10.1149/1.1838857 ↗
31. Li-O2 and Li-S batteries with high energy storage10.1038/nmat3191 ↗
32. The limits of low-temperature performance of Li-Ion cells10.1149/1.1393622 ↗
33. Capacity-fading mechanisms of LiNiO2-based lithium-ion batteries10.1149/1.3076136 ↗
34. Electrochemical behavior and passivation of current collectors in lithium-ion batteries10.1039/c0jm04353b ↗
35. Ageing mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.01.006 ↗
36. Si electrodes for Li-Ion batteries – a New way to look at an old problem10.1149/1.2817828 ↗
37. A capacity fade model for lithium-ion batteries including diffusion and kinetics10.1016/j.electacta.2012.03.063 ↗
38. Dahlin · 2010
39. Cycle-life model for graphite-LiFePO4 cells10.1016/j.jpowsour.2010.11.134 ↗
40. Study of Li1+x(Mn4/9Co1/9Ni4/9)1-xO2 cathode materials for vehicle battery applications10.1149/1.3600701 ↗
41. Pillot · 2012
42. USGS · 2011 · 1
43. On the safety of the Li4Ti5O12/LiMn2O4 lithium-ion battery system10.1149/1.2783770 ↗
44. Sauer · 2009
45. Carbon anode for dry-polymer electrolyte lithium batteries10.1016/j.jpowsour.2009.11.076 ↗
46. Dilatometric and mass spectrometric investigations on lithium ion battery anode materials10.1007/s00216-004-2570-9 ↗
47. Ab initio studies of structural and electronic properties of Li4Ti5O12 spinel10.1016/j.elecom.2007.01.013 ↗
48. Mixed solvent electrolytes containing fluorinated carboxylic acid esters to improve the thermal stability of lithium metal anode cells10.1016/S0167-2738(02)00088-7 ↗
49. Enhanced thermal stability of a lithiated nano-silicon electrode by fluoroethylene carbonate and vinylene carbonate10.1016/j.jpowsour.2012.08.066 ↗
50. Thermal stability of lithiated silicon anodes with electrolyte10.5012/bkcs.2011.32.1.145 ↗
51. Colossal reversible volume changes in lithium alloys10.1149/1.1388178 ↗
52. All-solid lithium electrodes with mixed-conductor matrix10.1149/1.2127495 ↗
53. Thermal instability of olivine-type LiMnPO4 cathodes10.1016/j.jpowsour.2009.08.046 ↗
54. On safety of lithium-ion cells10.1016/S0378-7753(99)00135-4 ↗
55. Tem study of electrochemical cycling-induced damage and disorder in LiCoO2 cathodes for rechargeable lithium batteries10.1149/1.1391631 ↗
56. Study of the lithium-rich integrated compound xLi2MnO3·(1-x)LiMO2 (x around 0.5; M = Mn, Ni, Co; 2:2:1) and its electrochemical activity as positive electrode in lithium cells10.1149/2.070302jes ↗
57. Lu · 2012
58. Comparison of Li[Li1/9Ni1/3Mn5/9]O2, Li[Li1/5Ni1/5Mn3/5]O2, LiNi0.5Mn1.5O4, and LiNi2/3Mn1/3O2 as high voltage positive electrode materials10.1149/1.3525268 ↗
59. Thermal stability of Li1-ΔM0.5Mn1.5O4 (M = Fe, Co, Ni) cathodes in different states of delithiation Δ
60. A comparison of the electrode/electrolyte reaction at elevated temperatures for various Li-ion battery cathodes10.1016/S0378-7753(01)01013-8 ↗
61. Advanced lithium battery cathodes using dispersed carbon fibers as the current collector10.1149/1.3611436 ↗
62. Atomic-scale investigation of defects, dopants, and lithium transport in the LiFePO4 olivine-type battery material10.1021/cm050999v ↗
63. Nanostructured sulfur cathodes10.1039/c2cs35256g ↗
64. DC and AC conductivity of Li4/3Ti5/3O4 spinel10.1016/j.ssi.2010.05.026 ↗
65. Safe and fast-charging Li-ion battery with long shelf life for power applications10.1016/j.jpowsour.2010.11.093 ↗
66. On the safety of the Li4Ti5O12/LiMn2O4 lithium-ion battery system10.1149/1.2783770 ↗
67. LiFSI vs. LiPF6 electrolytes in contact with lithiated graphite: comparing thermal stabilities and identification of specific SEI-reinforcing additives10.1016/j.electacta.2013.03.171 ↗
68. Metallic anodes for next generation secondary batteries10.1039/c3cs60177c ↗
69. Silicon@porous nitrogen-doped carbon spheres through a bottom-up approach are highly robust lithium-ion battery anodes10.1039/c2ra20170d ↗
70. Titanium-based anode materials for safe lithium-ion batteries10.1002/adfm.201200698 ↗
71. Kruger · 2011
72. Lithium insertion in nanostructured TiO2(B) architectures10.1021/ar300176y ↗
73. Decoration of sulfur with porous metal nanostructures: an alternative strategy for improving the cyclability of sulfur cathode materials for advanced lithium-sulfur batteries10.1039/c3cc41875h ↗