Effects of alkali additives in saturated LiNO3 aqueous electrolyte for improvement in cycling stability of polyimide anode
Source abstract
Abstract
Abstract In this work, the alkali additive is introduced to improve the cycling stability of polyimide anode in saturated LiNO3 aqueous electrolyte. Optimal electrolyte consists of saturated LiNO3 aqueous solution with 0.001 mol L−1 KOH, which improves the capacity retention of polyimide in a three-electrode cell. When assembling with LiCoO2 cathode, the full cells exhibit good cycling stability with high capacity retention even after 1000 cycles. The remarkable improvement in cyclic performance is attributed to the efficient suppression of hydrogen ion accumulation in the electrolyte. Furthermore, theoretical calculation results indicate that the carbonyl interactions with hydrogen ions result in poor structural stability of the polymer. The formation of colloidal LiOH is realized/obtained by introducing an appropriate amount of KOH into the saturated LiNO3 electrolyte. The resulting colloidal LiOH not only reduces the concentration of free hydroxyl ions in the electrolyte, but also continuously releases the hydroxyl ions to react with hydrogen ions. These results suggest that the introduction of alkali in saturated LiNO3 aqueous electrolytes improves the electrochemical stability of polyimide anode, which will push the practical applications of polyimide materials in aqueous Li-ion cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Progress of enhancing the safety of lithium ion battery from the electrolyte aspect10.1016/j.nanoen.2018.10.035 ↗
2. Review on solid electrolytes for all-solid-state lithium-ion batteries10.1016/j.jpowsour.2018.04.022 ↗
3. Solid halide electrolytes with high lithium-ion conductivity for application in 4 V class bulk-type All-solid-state batteries10.1002/adma.201803075 ↗
4. Advanced high-voltage aqueous lithium-ion battery enabled by "Water-in-Bisalt" electrolyte10.1002/anie.201602397 ↗
5. Aqueous Li-ion battery enabled by halogen conversion-intercalation chemistry in graphite10.1038/s41586-019-1175-6 ↗
6. Advances of aqueous rechargeable lithium-ion battery: a review10.1016/j.jpowsour.2014.10.009 ↗
7. Development of electrolytes towards achieving safe and high-performance energy-storage devices: a review10.1002/celc.201402277 ↗
8. Rechargeable lithium batteries with aqueous electrolytes10.1126/science.264.5162.1115 ↗
9. Raising the cycling stability of aqueous lithium-ion batteries by eliminating oxygen in the electrolyte10.1038/nchem.763 ↗
10. Secondary aqueous lithium-ion batteries with spinel anodes and cathodes10.1016/S0378-7753(98)00057-3 ↗
11. Hybrid aqueous energy storage cells using activated carbon and lithium-ion intercalated compounds10.1149/1.2203772 ↗
12. Electrochemical performance of LiFePO4/C synthesized by sol-gel method as cathode for aqueous lithium ion batteries10.1016/j.jallcom.2018.01.083 ↗
13. Excellent rate capabilities of (LiFePO4/C)//LiV3O8 in an optimized aqueous solution electrolyte10.1016/j.jpowsour.2013.01.026 ↗
14. LiV3O8 : characterization as anode material for an aqueous rechargeable Li-ion battery system10.1016/S0013-4686(00)00515-6 ↗
15. Achieving high aqueous energy storage via hydrogen-generation passivation10.1002/adma.201602583 ↗
16. Aqueous rechargeable alkali-ion batteries with polyimide anode10.1016/j.jpowsour.2013.10.091 ↗
17. Aqueous lithium-ion batteries using polyimide-activated carbon composites anode and spinel LiMn2O4 cathode10.1021/acssuschemeng.6b02127 ↗
18. Carboxylated polyimide separator with excellent lithium ion transport properties for a high-power density lithium-ion battery10.1039/C7TA08702K ↗
19. Synthesis, characterization and hydrolytic stability of poly (amic acid) ammonium salt
20. Polyimides: promising energy-storage materials10.1002/anie.201002439 ↗
21. “Water-in-salt” electrolyte enables high-voltage aqueous lithium-ion chemistries10.1126/science.aab1595 ↗
22. A fiber-shaped aqueous lithium ion battery with high power density10.1039/C6TA03477B ↗
23. A polyimide based all-organic sodium ion battery10.1039/C5TA02043C ↗
24. Intercalation of IR absorber into layered double hydroxides: Preparation, thermal stability and selective IR absorption10.1016/j.materresbull.2011.12.056 ↗
25. Methylated mono- and di(ethylene glycol)-functionalized β-sheet forming polypeptides10.1021/bm005597p ↗
26. Frisch · 2009
27. Multiwfn: a multifunctional wavefunction analyzer10.1002/jcc.22885 ↗
28. Bond order analysis based on the Laplacian of electron density in fuzzy overlap space10.1021/jp4010345 ↗
29. Ultra‐fast cycling of nanoscale thin‐film LiCoO2 electrodes in aqueous electrolytes10.1002/celc.201800822 ↗
30. Large-area polyimide/SWCNT nanocable cathode for flexible lithium-ion batteries10.1002/adma.201502241 ↗
31. Polythiophene coated aromatic polyimide enabled ultrafast and sustainable lithium ion batteries10.1039/C7TA07893E ↗