Comparative study of Pb 1-x Ba x Li 2 Ti 6 O 14 (0≤ x ≤1) as lithium storage materials for secondary batteries
Source abstract
Abstract
Abstract The preparation and characterization of Pb1-xBaxLi2Ti6O14 (x = 0, 1/4, 1/2, 3/4, 1) as anode materials for lithium ion batteries are investigated in this research. The structure, morphology and electrochemical properties are compared with each other by changing the Pb/Ba atomic ratio in Pb1-xBaxLi2Ti6O14. It can be observed that each sample shows the same orthorhombic structure with Cmca space group. Moreover, it can also be found that the working potential, conductivity, cycling and rate performances of as-received samples gradually change along with the evolution of x in Pb1-xBaxLi2Ti6O14 (x = 0, 1/4, 1/2, 3/4, 1). Electrochemical evaluation shows that the operating potential of the as-received sample gradually decreases with increasing x value in Pb1-xBaxLi2Ti6O14 and its initial charge capacity increases reversely. Moreover, different Pb/Ba atomic ratio also brings different cycling stability for Pb1-xBaxLi2Ti6O14. Especially for Pb3/4Ba1/4Li2Ti6O14, it presents better electrochemical properties than other samples. After 120 cycles, the reversible capacity of Pb3/4Ba1/4Li2Ti6O14 is maintained at 129.7 mAh g−1 with capacity retention of 88.3%. In addition, its electrochemical reversibility is also demonstrated by in-situ X-ray investigation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Layered lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for lithium-ion batteries10.1246/cl.2001.642 ↗
2. Electrochemistry and structural chemistry of Li[CrTi]O4 ( Fd-3m ) in nonaqueous lithium cells10.1149/1.1393944 ↗
3. LiCrTiO4: a high-performance insertion anode for lithium-ion batteries10.1002/cphc.201200398 ↗
4. Rapid lithiation and delithiation property of V-doped Li2ZnTi3O8 as anode material for lithium-ion battery10.1021/acssuschemeng.5b00505 ↗
5. Nb-doped TiO2 nanofibers for lithium ion batteries10.1021/jp402498p ↗
6. Mn-doped TiO2 nanosheet-based spheres as anode materials for lithium-ion batteries with high performance at elevated temperatures10.1021/am500604p ↗
7. Composite nanofibers as advanced materials for Li-ion, Li-O2 and Li-S batteries10.1016/j.electacta.2016.02.012 ↗
8. Forcespinning: a new method for the mass production of Sn/C composite nanofiber anodes for lithium ion batteries10.1016/j.ssi.2015.12.020 ↗
9. Graphene-based nanocomposites for energy storage10.1002/aenm.201502159 ↗
10. Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries10.1039/c0ee00699h ↗
11. α-Fe2O3 nanoparticle-loaded carbon nanofibers as stable and high-capacity anodes for rechargeable lithium-ion batteries10.1021/am300333s ↗
12. A new oxyfluorinated titanium phosphate anode for a high-energy lithium-ion battery10.1021/am507272x ↗
13. Graphitic carbon conformal coating of mesoporous TiO2 hollow spheres for high-performance lithium ion battery anodes10.1021/jacs.5b08743 ↗
14. Multichannel hollow structure for improved electrochemical performance of TiO2/Carbon composite nanofibers as anodes for lithium ion batteries10.1016/j.jallcom.2016.06.089 ↗
15. Enhanced performance of “flower-like” Li4Ti5O12 motifs as anode materials for high-rate lithium-ion batteries10.1002/cssc.201500639 ↗
16. New anode framework for rechargeable lithium batteries10.1021/cm200441h ↗
17. Intercalation pseudo-capacitive TiNb2O7@carbon electrode for high-performance lithium ion hybrid electrochemical supercapacitors with ultrahigh energy density10.1016/j.nanoen.2015.04.011 ↗
18. Unveiling TiNb2O7 as an insertion anode for lithium ion capacitors with high energy and power density10.1002/cssc.201400157 ↗
19. “Nano-pearl-string” TiNb2O7 as anodes for rechargeable lithium batteries10.1002/aenm.201200396 ↗
20. Highly ordered single crystalline nanowire array assembled three-dimensional Nb3O7(OH) and Nb2O5 superstructures for energy storage and conversion applications10.1021/acsnano.5b05441 ↗
21. Advanced hybrid supercapacitor based on a mesoporous niobium pentoxide/carbon as high-performance anode10.1021/nn501972w ↗
22. Layered phosphorus-like GeP5: a promising anode candidate with high initial coulombic efficiency and large capacity for lithium ion batteries10.1039/C5EE02524A ↗
23. Ionic conduction in the sintered oxides of the system Li2O-BaO-MO2 (M = Ti, Sn, Zr)10.1016/0167-2738(89)90302-0 ↗
24. MLi2Ti6O14 (M = Sr, Ba, 2Na) lithium insertion titanate materials: a comparative study10.1021/ic902222g ↗
25. Titanium-based anode materials for safe lithium-ion batteries10.1002/adfm.201200698 ↗
26. Copper/carbon coated lithium sodium titanate as advanced anode material for lithium-ion batteries10.1016/j.jpowsour.2014.02.097 ↗
27. Comparative study of Na2Li2Ti6O14 prepared by different methods as advanced anode material for lithium-ion batteries10.1016/j.jelechem.2014.01.005 ↗
28. Enhanced lithium storage property of Na-doped Li2Na2Ti6O14 anode materials for secondary lithium-ion batteries10.1039/C5RA04427H ↗
29. Molten salt synthesis of sodium lithium titanium oxide anode material for lithium ion batteries10.1016/j.jallcom.2015.04.113 ↗
30. Energy-savvy solid-state and sonochemical synthesis of lithium sodium titanate as an anode active material for Li-ion batteries10.1016/j.jpowsour.2015.07.057 ↗
31. Reversible lithium storage in Na2Li2Ti6O14 as anode for lithium ion batteries10.1016/j.elecom.2009.04.013 ↗
32. Improved lithium storage performance of lithium sodium titanate anode by titanium site substitution with aluminum10.1016/j.jpowsour.2015.05.076 ↗
33. Advanced electrochemical performance of Li1.95Al0.05Na2Ti6O14 anode material for lithium ion batteries10.1016/j.electacta.2015.07.082 ↗
34. Tunable lithium storage properties of metal lithium titanates by stoichiometric modulation10.1016/j.elecom.2016.01.006 ↗
35. Synthesis process investigation and electrochemical performance characterization of SrLi2Ti6O14 by ex situ XRD10.1016/j.jallcom.2013.07.070 ↗
36. Ultralong SrLi2Ti6O14 nanowires composed of single-crystalline nanoparticles: promising candidates for high-power lithium ions batteries10.1016/j.nanoen.2015.02.002 ↗
37. Template-assisted synthesis of high packing density SrLi2Ti6O14 for use as anode in 2.7-V lithium-ion battery10.1016/j.jpowsour.2010.11.011 ↗
38. Electrochemical performance of LiCoO2/SrLi2Ti6O14 batteries for high-power applications10.1016/j.jpowsour.2013.06.149 ↗
39. Study of the Li+ intercalation/de-intercalation behavior of SrLi2Ti6O14 by in-situ techniques10.1016/j.jpowsour.2015.10.032 ↗
40. SrLi2Ti6O14: a probable host material for high performance lithium storage10.1016/j.electacta.2015.08.159 ↗
41. A new strontium lithium titanium oxide, SrLi2Ti6O14: crystal growth and structure determination10.1515/znb-2002-0507 ↗
42. Li2MTi6O14 (M = Sr, Ba): new anodes for lithium-ion batteries10.1016/S1388-2481(03)00090-0 ↗
43. Lithium barium titanate: a stable lithium storage material for lithium-ion batteries10.1016/j.jpowsour.2014.12.132 ↗
44. Improved the lithium storage capability of BaLi2Ti6O14 by electroless silver coating10.1016/j.electacta.2015.10.175 ↗
45. A new family of isostructural titanates, MLi2Ti6O14(M = Sr, Ba, Pb)10.1016/j.jallcom.2004.08.026 ↗
46. PbLi2Ti6O14: a novel high-rate long-life anode material for rechargeable lithium-ion batteries10.1016/j.jpowsour.2016.08.138 ↗
47. Complex titanates Sr1-xPbxLi2Ti6O14 (0≤x≤1) as anode materials for high-performance lithium-ion batteries10.1016/j.electacta.2016.07.090 ↗
48. Design and comparison of ex situ and in situ devices for Raman characterization of lithium titanate anode material10.1007/s11581-011-0544-4 ↗
49. Large-scale synthesis of Li1.15V3O8 nanobelts and their lithium storage behavior studied by in situ X-ray diffraction10.1039/c1jm14894j ↗
50. Synthesis and electrochemical properties of Li4Ti5O1210.1016/j.jallcom.2011.03.078 ↗
51. Enhanced rate performance of Li4Ti5O12 anode material by ethanol-assisted hydrothermal synthesis for lithium-ion battery10.1016/j.ceramint.2014.02.077 ↗
52. Li5Cr7Ti6O25 as a novel negative electrode material for lithium-ion batteries10.1039/C5CC05349H ↗