High temperature creep deformation of directionally solidified Al2O3/Er3Al5O12

Abstract The microstructure of directionally solidified Al2O3/Er3Al5O12 (19.5 mol% Er2O3) is analyzed and high temperature creep deformation studied using fibers in tension between 1400° C and 1550° C. The directionally solidified Al2O3/Er3Al5O12 system is an in situ composite and has a fine eutectic- microstructure with sub-micron phase spacing. The microstructure is elongated in the direction of growth. Transmission electron microscopy observations revealed well-bonded interfaces and scatter within the crystallographic alignment of the constituent phases. The creep resistance of the system was very high, comparable to c-axis sapphire, and failure initiated at the lamella interfaces. The influence of the different elastic and plastic behaviors of the eutectic components on creep is examined. A critical discussion on the origin of the high stress dependence of the creep rate, the existence of steady state creep, and the relevant microscopic deformation mechanisms is presented.