Electrochemical and structural studies of the carbon-coated Li[CrxLi(1/3−x/3)Ti(2/3−2x/3)]O2 (x=0.3, 0.35, 0.4, 0.45)
Source abstract
Abstract
Abstract A series of carbon-coated layered structured Li[Cr x Li (1/3− x /3) Ti (2/3−2 x /3) ]O 2 samples (0.3 ≤ x ≤ 0.45) were prepared. Among them, the sample of x = 0.4 shows the highest initial reversible capacity of 207 mAh g −1 at 30 mA g −1 in 2.5–4.4 V. The reversible Li-storage capacities for the samples with high x values ( x = 0.4, 0.45) faded slightly while the samples with low Cr content ( x = 0.3 and 0.35) showed a capacity increase upon cycling. It was found that the relative intensity ratio of (0 0 3) peak to (1 0 4) peak ( R (0 0 3) = I (0 0 3) / I (1 0 4) ) is influenced strongly by x value in as-prepared samples. The samples of x = 0.35 and 0.4 turn to a similar structure with low R (0 0 3) value during cycling. These phenomena indicate that the cation mixing of Cr 3+ in the lithium layer occurs in as-prepared samples and became more significant upon delithiation and lithiation. This is supposed being a necessary process for Cr-based layered structure materials possessing electrochemical reactivates. The occurrence of the cation mixing is beneficial from the local lattice distortion caused by the short-range ordering between Ti and Li. This is supposed to be helpful for the migration of Cr 6+ and Cr 3+ at tetrahedral and octahedral sites. Different from the case of LiNiO 2 , the cation mixing is essential for the transport and storage of lithium in the carbon-coated Li–Cr–Ti–O layered compounds.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Storey · J. Power Sources · 2001 · 97–98 · 54110.1016/S0378-7753(01)00692-9 ↗
2. Grincourt · J. Power Sources · 2001 · 97–98 · 71110.1016/S0378-7753(01)00750-9 ↗
3. Balasubramanian · J. Electrochem. Soc. · 2002 · 149 · A17610.1149/1.1431962 ↗
4. Ammundsen · J. Electrochem. Soc. · 2002 · 149 · A43110.1149/1.1456535 ↗
5. Lu · J. Electrochem. Soc. · 2002 · 149 · A145410.1149/1.1513557 ↗
6. Lu · J. Electrochem. Soc. · 2003 · 150 · A104410.1149/1.1584439 ↗
7. Zhang · Electrochem. Commun. · 2002 · 4 · 56010.1016/S1388-2481(02)00370-3 ↗
8. Zhang · J. Electrochem. Soc. · 2003 · 150 · A60110.1149/1.1566016 ↗
9. Mi · Electrochem. Solid-State Lett. · 2006 · 9 · A32410.1149/1.2197974 ↗
10. Ravet · J. Power Sources · 2001 · 97–98 · 50310.1016/S0378-7753(01)00727-3 ↗
11. Doeff · Electrochem. Solid-State Lett. · 2003 · 6 · A20710.1149/1.1601372 ↗
12. Huang · Electrochem. Solid-State Lett. · 2001 · 4 · A17010.1149/1.1396695 ↗
13. Boultif · J. Appl. Crystallogr. · 1991 · 24 · 98710.1107/S0021889891006441 ↗
14. Mather · J. Mater. Chem. · 2000 · 10 · 221910.1039/b000817f ↗
15. Morales · Mater. Res. Bull. · 1990 · 25 · 62310.1016/0025-5408(90)90028-Z ↗
16. Ohzuku · Electrochim. Acta · 1993 · 38 · 115910.1016/0013-4686(93)80046-3 ↗
17. Jeong · J. Power Sources · 1998 · 70 · 7010.1016/S0378-7753(97)02667-0 ↗
18. Song · J. Appl. Electrochem. · 2005 · 35 · 107310.1007/s10800-005-9012-z ↗