Operation results of a 100kW class reformer for molten carbonate fuel cell
Source abstract
Abstract
Abstract The performance and operation results of the reformer that supplies synthesis gases to a 100 kW class molten carbonate fuel cell are reported. A CH 4 conversion ratio of 95.6%, a CO conversion ratio of 31.2%, a reforming reaction temperature of 745 °C and a produced hydrogen rate of 70.7 Nm 3 h −1 are obtained from a comparison of post gas analysis and theoretical estimation of thermodynamics at 87.6 h. To calculate the efficiency, the Cycle-Tempo 5.0 program is used. The thermal efficiency of the designed system is 61.1% and the real thermal efficiency of the system is 44.5% at 108 h. The low thermal efficiency is mainly attributed to supplying excess fuel to meet the outlet temperature of the reforming reactors. In the present system, the outlet temperature of the reforming reactors appears to be below the temperature required at the stack of molten carbonate fuel cell (MCFC), that is, over 580 °C. In order to maintain the outlet temperature of the reforming reactor over 580 °C, it is necessary to heat the reformed gases at the convection zone of combustion gases. For higher thermal efficiency, the combustion space and the excess fuel should be reduced until reaching minimum temperature of the surface of reforming tube, at which point has no influence on the CH 4 conversion ratio.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalysts for Methane Reforming · Advancements in Solid Oxide Fuel Cells · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (7)
Show source-provided references
1. The brochure of tubular reforming of Haldo Topsoe company on the web-site www.topsoe.com.
2. Evaluation of thermodynamically favorable operating conditions for production of hydrogen in three different reforming technologies10.1016/S0378-7753(02)00027-7 ↗
3. Production of synthesis gas10.1016/0920-5861(93)80059-A ↗
4. Conversion of hydrocarbon and alcohols for fuel cells10.1016/S0378-7753(01)00939-9 ↗
5. Production of hydrogen by steam reforming of C3 organics over Pd–Cu/γ–Al2O3 catalyst10.1016/j.ijhydene.2005.04.014 ↗
6. Smith · 2001
7. Reforming of natural gas—hydrogen generation for small scale stationary fuel cell systems10.1016/S0378-7753(01)00940-5 ↗